Shoulder belts in a Blazer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northeastblazer · 05-01-2003, 04:57 PM

Can three point seat belts like those from Juliano's or a set of NOS ones be added to a 69-72 Blazer? I wonder because the B-pillar is part of the hard top. Could it be done if the hardtop were never removed? Thanks.

crazy4chevs · 05-01-2003, 05:03 PM

Most people ive heard, talk about the new chev seats with the seatbelts built in. I dont think the fiberglass would be strong enough.

**Yukon Jack** · 05-01-2003, 05:08 PM

I wouldn't attach it to the fiberglass top. Just watched a roll over video of a 73-to around 75 blazer (not a halfcab version) and it's top disintegrated - not what you want to have happen to one of your seatbelt attachment points!

northeastblazer · 05-01-2003, 05:16 PM

Ok, thanks for the info guys. Lap belts should be fine.

smokekiki · 05-01-2003, 05:35 PM

I put a roll cage in mine.Attatched the belts to the bar.I put an 8 point cage in.An added benifit is it keeps the body from flexing with the top off.

05-01-2003, 04:57 PM	#1
northeastblazer Registered User Join Date: Apr 2003 Location: Princeton, NJ and Newton, MA Posts: 22	Shoulder belts in a Blazer? Can three point seat belts like those from Juliano's or a set of NOS ones be added to a 69-72 Blazer? I wonder because the B-pillar is part of the hard top. Could it be done if the hardtop were never removed? Thanks. __________________ Looking for a 69-72 Blazer...

05-01-2003, 05:03 PM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Most people ive heard, talk about the new chev seats with the seatbelts built in. I dont think the fiberglass would be strong enough. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

05-01-2003, 05:08 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	I wouldn't attach it to the fiberglass top. Just watched a roll over video of a 73-to around 75 blazer (not a halfcab version) and it's top disintegrated - not what you want to have happen to one of your seatbelt attachment points! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-01-2003, 05:16 PM	#4
northeastblazer Registered User Join Date: Apr 2003 Location: Princeton, NJ and Newton, MA Posts: 22	Ok, thanks for the info guys. Lap belts should be fine. __________________ Looking for a 69-72 Blazer...

05-01-2003, 05:35 PM	#5
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	I put a roll cage in mine.Attatched the belts to the bar.I put an 8 point cage in.An added benifit is it keeps the body from flexing with the top off. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.