NOS versus used bedside prices - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HOTFUN · 02-29-2012, 07:43 PM

I have found one NOS factory 60-66 short fleet bedside with about three repairable dents. I have also boughten or seen a dozen short fleet bedsides in the last month. All need really more work than I would like to have too.

What would one expect to pay for a NOS 6 ft bedside with say 3 to 4 hours repair damage and also if found, a very nice clean rust free used bedside?

I've even considered cutting down 8 foot bedsides since the labor on my used pieces would about equal the shortening of a super clean 8 foot.

Any ideas?

Mark

LT1 Burb · 02-29-2012, 08:58 PM

I just sold a very nice complete shortbed for 350 and it needed a few hours labour, I would pay 250 for a real nice bedside needing minor work and wouldn't pay more then 600 for an NOS one needing work.

**joedoh** · 02-29-2012, 09:03 PM

Quote:

Originally Posted by HOTFUN

I've even considered cutting down 8 foot bedsides since the labor on my used pieces would about equal the shortening of a super clean 8 foot.

Mark

youd need both sides or a swb wheelarch.

or maybe you wouldnt, they would be different side to side but who would really notice? only picasso saw both sides of everything

HOTFUN · 02-29-2012, 10:41 PM

Thanks all. I'll probably just keep looking for a nice clean swb bedside.

02-29-2012, 07:43 PM	#1
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	NOS versus used bedside prices I have found one NOS factory 60-66 short fleet bedside with about three repairable dents. I have also boughten or seen a dozen short fleet bedsides in the last month. All need really more work than I would like to have too. What would one expect to pay for a NOS 6 ft bedside with say 3 to 4 hours repair damage and also if found, a very nice clean rust free used bedside? I've even considered cutting down 8 foot bedsides since the labor on my used pieces would about equal the shortening of a super clean 8 foot. Any ideas? Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

02-29-2012, 08:58 PM	#2
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: NOS versus used bedside prices I just sold a very nice complete shortbed for 350 and it needed a few hours labour, I would pay 250 for a real nice bedside needing minor work and wouldn't pay more then 600 for an NOS one needing work.

02-29-2012, 10:41 PM	#4
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: NOS versus used bedside prices Thanks all. I'll probably just keep looking for a nice clean swb bedside. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.