TN AM Radios 2 truck 1 Corvair and other Radio stuff

[thelonerife]

I have some radios and hardware I need to get rid of. The truck radios do not work. I have tested them but thats as far as I went with them. Just radio w/no cups or knobs. The faces do have pits. They are numbered 11 and 12. see pic 25.00 shipped

62 Corvair radio that I tested and it does work and light up. Sounds like an AM though. I put it in a dash and it does fit the opening. You have to use two washers on the left to sandwich the hole in the dash instead of using a cup. Right side uses a cup. The knobs stick out a little but you can trim down the stems. You'll use your rear mounting bracket. It does have one on it from the Corvair but not sure if that'll work on a truck. As you see it in the dash with described hardware and knobs. 40.00 shipped

Blue center dash section is 50.00 shippedSOLD!

I'll post original mounting brackets, cups, & knobs after I get a good count on what I have.

[thelonerife]

Corvair radio SOLD

[thelonerife]

cab bracket 5.00 ea shipped ea. ONE SOLD
sets of brackets 15.00 shipped ea. set SOLD
ones different with no tabs and no arm bracket don't know why. SOLD


black radio knobs w/chrome pcs. 15.00 shipped SOLD ON EBAY
radio mounting cup 1 pair 8.00 shipped (have two pr.) sold
nuts free just ask for them when you buy something.gone

[1970 Bowtie]

Chuck,I will take a set of the radio mounting cups and a set of nuts(that dont sound right).Is your PayPal still the same?..Mike...

[thelonerife]

pm sent

[tooter]

I need a set of brackets, you still do paypal?

[tooter]

Payment sent Thanks

[1970 Bowtie]

Payment sent.Thanks

[thelonerife]

Thanks, it'l go out Mon.

I'll make package discounts too.

[thelonerife]

I found some knobs that were in a Cadi. I think they might look good in a Cheyenne that has woodgrain on the dash. Some small pitting. 12.00 shipped.

wood grain Knobs only. The chrome backing plates are not for sale.

[thelonerife]

bump

[cjohnson6772]

Just a bump for you because that corvair radio and the woodgrain knobs are sweet! I love the look of the corvair radio

[tooter]

Brackets came yesterday Thanks

[thelonerife]

Your Welcome toot

[1970 Bowtie]

My radio mounting cups arrived,Thanks.

[thelonerife]

while cleaning up a bit I found another am radio like the first two truck ones.

[thelonerife]

ttt

[205harleyman]

Can you send me the dimensions of the stock radio? not the part that goes thru the whole. Height, width, and depth.

Thanks in advance, Tim

[thelonerife]

height 3 1/4''
width 8 1/2''
depth w/chrome face 6''
knobs and push buttons add another 3/4''
bracket on back for mounting add another 1 1/8''

lmk if thats what your looking for.

[205harleyman]

Thanks alot!

[thelonerife]

ttt

[70blazer]

I need a set of mounting brackets and the wiring plug for the back if you have one. Shipping to 84321, thanks Matt.
Posted via Mobile Device

[thelonerife]

I'm sure I have those. let me check for sure.

[thelonerife]

Have the stuff. pm sent

[thelonerife]

ttt