Please help me out on interchange questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hugger6933 · 03-03-2012, 11:07 PM

I have just gotten homew a 64 C60 dump truck. This truck has NO rust it has been under a tractor shed its whole life and all the lights work the horn works cab lamps and the radio comes on but the speaker is busted. This truck has 27k miles. Now for the bad I hate to say it but this truck is the wrong year for me . Nothing against the body style it is really starting to grow on me , but I am building three 67-72's at this time and I didn't really like that truck either but I started building one in memory of my brother that has died. He loved that body of truck and in his honor I have been pulled into that gen of truck. Now back to the 64 c60, It was in a little fender bender right before it was sent out to pasture, and it needs a hood grille grille surround and a left fender. Also iyt needs a right hand vent glass. Here is my problem I think everytrhing will change off of the regular truck with the exception of the left fender. Is that correct? will all or any of that stuff change? Thanks for your help. I would like to find this stuff out so that the parts seach can begin I just want to look for the right stuff.

**Captainfab** · 03-04-2012, 03:00 AM

As long as it's not a LCF model, the hood is the same as a pickup, Suburban or Panel. The fender,grill, and grill panels are specific to the C40 and bigger trucks. There are also 2 different widths of the 'flare' on the fender. There was a member selling some parts for the bigger trucks in the '60-'66 classifieds section here on the forum. I have also seen them on ebay from time to time.

padresag · 03-04-2012, 01:15 PM

this guy has a rad support and grille surround, fenders are gone. 1/2 way down the r/side
ron

padresag · 03-04-2012, 07:36 PM

http://www.billstruckshop.com/60-66used.html
i guess that it helps to put in the link
ron

hugger6933 · 03-04-2012, 10:03 PM

What about the vent glass will it work from a c10-30? Is the grill and surround made to look different or is it a diffrent size? Thanks for the help.

jonzcustomshop · 03-04-2012, 10:26 PM

the doors and all related door parts are the same on all models chev/gmc.
the grille surround is completely different, it is about a foot taller, and is flat, compared to a c10-30, which is angled.

hugger6933 · 03-05-2012, 01:14 PM

I'm sorry please don't take my questions as undermining the knowledge you have for the 60-66 truck because I in no way intended on doing that

03-03-2012, 11:07 PM	#1
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Please help me out on interchange questions I have just gotten homew a 64 C60 dump truck. This truck has NO rust it has been under a tractor shed its whole life and all the lights work the horn works cab lamps and the radio comes on but the speaker is busted. This truck has 27k miles. Now for the bad I hate to say it but this truck is the wrong year for me . Nothing against the body style it is really starting to grow on me , but I am building three 67-72's at this time and I didn't really like that truck either but I started building one in memory of my brother that has died. He loved that body of truck and in his honor I have been pulled into that gen of truck. Now back to the 64 c60, It was in a little fender bender right before it was sent out to pasture, and it needs a hood grille grille surround and a left fender. Also iyt needs a right hand vent glass. Here is my problem I think everytrhing will change off of the regular truck with the exception of the left fender. Is that correct? will all or any of that stuff change? Thanks for your help. I would like to find this stuff out so that the parts seach can begin I just want to look for the right stuff.

03-04-2012, 03:00 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Please help me out on interchange questions As long as it's not a LCF model, the hood is the same as a pickup, Suburban or Panel. The fender,grill, and grill panels are specific to the C40 and bigger trucks. There are also 2 different widths of the 'flare' on the fender. There was a member selling some parts for the bigger trucks in the '60-'66 classifieds section here on the forum. I have also seen them on ebay from time to time. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-04-2012, 01:15 PM	#3
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Please help me out on interchange questions this guy has a rad support and grille surround, fenders are gone. 1/2 way down the r/side ron

03-04-2012, 07:36 PM	#4
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Please help me out on interchange questions http://www.billstruckshop.com/60-66used.html i guess that it helps to put in the link ron

03-04-2012, 10:03 PM	#5
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: Please help me out on interchange questions What about the vent glass will it work from a c10-30? Is the grill and surround made to look different or is it a diffrent size? Thanks for the help.

03-04-2012, 10:26 PM	#6
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Please help me out on interchange questions the doors and all related door parts are the same on all models chev/gmc. the grille surround is completely different, it is about a foot taller, and is flat, compared to a c10-30, which is angled. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

03-05-2012, 01:14 PM	#7
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: Please help me out on interchange questions I'm sorry please don't take my questions as undermining the knowledge you have for the 60-66 truck because I in no way intended on doing that



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.