AM FENDERS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snow man · 03-26-2002, 12:06 PM

I WOULD LIKE TO KNOW IF ANYONE HAS HAD BAD LUCK TRYING TO PUT AFTER MARKET FENDERS ON.I HAD THEM ON MORE TIMES THAN I CAN COUNT AND THEY JUST WON'T LINE UP RIGHT. THE BODY LINES ARE SO FAR OFF GOD COULDN'T LINE THEM UP. I HAVE AN OLD RUSTY PAIR AND THEY LINE UP PERFECT. WHATS THE DEAL? THE GRILL SHELL WILL NOT BOLT ON EITHER BUT WITH OLD RUSTY FENDERS IT LINES UP PERFECT. NEED HELP!!! THESE FENDERS WERE SHIPPED FROM GOODMARK.

71402BB · 03-26-2002, 12:30 PM

these fenders are goodmark? Maybe they had an "off" day that day? this does happen some time from what I've heard. Maybe you can trade them for another set of goodmark fenders that do fit?

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

NSANE68!!! · 03-26-2002, 01:02 PM

I bought Goodmark cowl hood, and 2 67 fenders. They all lined up great. I did have to use the die-grinder in some of the mounting holes, to make them a little bigger for adjusting tolerences. Oh and shims you will have to re shim everything, they will not go on the same as stock. Meaning if you had 2shims under the wiper cowl with stock, you may now with the goodmark need only 1 shim or maybe none at all. Lining Body parts just takes time, it is kind of an ART. Don't get frustrated, walk away go get a soda or beer. Then start over with a clear head. Patience is a virtue. Good luck.

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw

keenee · 03-26-2002, 08:22 PM

I also have goodmark fenders purchased through my chevy dealer and had some trouble getting things to line up, when the body lines finally did, the grill shell is way
off I have been perplexed for 6 weeks now.
My truck is a 72, has anyone used 69-72 fenders from goodmark?

Spoof · 03-26-2002, 09:50 PM

Man, thats got to make you mad. I am leery of reproductions for this reason but I thought goodmark was known for the quality of fit. I would be interested to hear of any other manufacturers who provide a more reliable fit tho I'm not holding my breath. I really want to know who makes a good fit in cab corners.

------------------
71 GMC 2500 Custom Camper
71 GMC Suburban 1500 Super Custom
71 Chevrolet 1500 Donor
http://www.able-bravo.com

**MJN** · 03-26-2002, 09:59 PM

I bought a pair of rocker panels from Goodmark and they fit perfectly. I thought they were made in the US but they said Taiwan on them. Really dissapointed me! I also bought a fender for my '74 but not form goodmark and had to shim and drill and nothing lined up forty bucks down the hole.

03-26-2002, 12:06 PM	#1
snow man Registered User Join Date: Mar 2002 Location: mt. zion illinois Posts: 276	AM FENDERS I WOULD LIKE TO KNOW IF ANYONE HAS HAD BAD LUCK TRYING TO PUT AFTER MARKET FENDERS ON.I HAD THEM ON MORE TIMES THAN I CAN COUNT AND THEY JUST WON'T LINE UP RIGHT. THE BODY LINES ARE SO FAR OFF GOD COULDN'T LINE THEM UP. I HAVE AN OLD RUSTY PAIR AND THEY LINE UP PERFECT. WHATS THE DEAL? THE GRILL SHELL WILL NOT BOLT ON EITHER BUT WITH OLD RUSTY FENDERS IT LINES UP PERFECT. NEED HELP!!! THESE FENDERS WERE SHIPPED FROM GOODMARK.

03-26-2002, 12:30 PM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	these fenders are goodmark? Maybe they had an "off" day that day? this does happen some time from what I've heard. Maybe you can trade them for another set of goodmark fenders that do fit? ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

03-26-2002, 01:02 PM	#3
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	I bought Goodmark cowl hood, and 2 67 fenders. They all lined up great. I did have to use the die-grinder in some of the mounting holes, to make them a little bigger for adjusting tolerences. Oh and shims you will have to re shim everything, they will not go on the same as stock. Meaning if you had 2shims under the wiper cowl with stock, you may now with the goodmark need only 1 shim or maybe none at all. Lining Body parts just takes time, it is kind of an ART. Don't get frustrated, walk away go get a soda or beer. Then start over with a clear head. Patience is a virtue. Good luck. ------------------ 68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

03-26-2002, 08:22 PM	#4
keenee Registered User Join Date: Mar 2002 Location: Houston, Pennsylvania Posts: 231	I also have goodmark fenders purchased through my chevy dealer and had some trouble getting things to line up, when the body lines finally did, the grill shell is way off I have been perplexed for 6 weeks now. My truck is a 72, has anyone used 69-72 fenders from goodmark? __________________ '96 GMC Suburban 6.5t '99 F**d Windstar '07 SON '09 DAUGHTER XOXOXO Wife

03-26-2002, 09:50 PM	#5
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	Man, thats got to make you mad. I am leery of reproductions for this reason but I thought goodmark was known for the quality of fit. I would be interested to hear of any other manufacturers who provide a more reliable fit tho I'm not holding my breath. I really want to know who makes a good fit in cab corners. ------------------ 71 GMC 2500 Custom Camper 71 GMC Suburban 1500 Super Custom 71 Chevrolet 1500 Donor http://www.able-bravo.com __________________ 71 GMC 1500 LWB

03-26-2002, 09:59 PM	#6
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	I bought a pair of rocker panels from Goodmark and they fit perfectly. I thought they were made in the US but they said Taiwan on them. Really dissapointed me! I also bought a fender for my '74 but not form goodmark and had to shim and drill and nothing lined up forty bucks down the hole. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.