Willys Jeep guy just brought home 66 fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66fleetside · 03-27-2012, 09:16 PM

Spring arrived and the though of working on a 66 long bed from Texas versus my 52 Willys no floor fred flintstone truck won out.
So far cleaned out the mice and removed the bed as wood was gone but metal is intact. Neighbor suggested 3/4 pressure treated plywood?
My issue is with the straight 6. The motor seems stuck as a quick attempt with the fan belt showed. Strangely enough though the crank pulley has play to the tune of about an inch or so. I removed the belt completely tonight and could see the crank nut not moving and the pulley seems wobbly and broken. I am thinking of putting some brake fluid down the cylinders to see what happens. How can I tell if it is a 250 or 292? Where are the numbers and can I find out if the motor is original. I see Autozone and Advance both have crate engines for about $1500-$1700 bucks.

Alan's Classic · 03-27-2012, 11:42 PM

Welcome aboard, I dont' know much about 6 cyl, but thought I'd bump ya to the top.

**aerotruk63** · 03-28-2012, 07:24 AM

The 194/230/250 have the motor mounts directly across from each other. The 292 has staggered motor mounts with the passenger side further forward. Have you tried to turn it over with the starter?

**aerotruk63** · 03-28-2012, 07:25 AM

Pardon my lack of social skills, Welcome to the greatest forum you'll ever find concerning these trucks.

66fleetside · 03-28-2012, 07:56 AM

I did not try the starter yet. Originally I figured I was going to pull the motor but I am starting to rethink getting it going. I think I will put something in the cylinders, marvel or brake fluid and hook a battery. It has an alternator so I think it is 12 v. Thanks for the welcome.

1963c-10 · 03-28-2012, 08:34 AM

The 292 also has the larger side covers on the passenger side of the block.

**Captainfab** · 03-29-2012, 12:13 AM

Welcome to the forum

Another way to ID a 292 is the passenger side motor mount is between the distributor and the fuel pump. On the 230/250 it is behind both.

**70cst** · 03-29-2012, 12:17 AM

Hey 66fleetside...

to a great forum and

from Ohio. by the way...we luv pics

nomrlz · 03-29-2012, 07:55 AM

Hi

66fleetside · 03-29-2012, 09:17 AM

Thanks for the support I will post some pics soon. An update it looks like a 250 based on mounts. Yesterday I pulled the plugs and shot brake fluid down the cylinders, waited a while and put it in gear and just rocked the truck. I was delighted to see the drive shaft turn and the motor is free.! The crank pulley seems it was not tight enough or has the wrong key way and does not seem to have anything wrong. So I think now I will get new plugs, cap wires and see if I can't get some spark. I just might get it going after all. Next issue may be with the shifter linkage, It's a column shift and I would guess a three speed. This is my first column shift I thought the pattern was like an H only sideways. Problem is it only goes Up and down. Probably Reverse and First.
Any one know of a Service manual to download.?

suzq044 · 03-29-2012, 06:49 PM

From one Jeep person to another, welcome

Although, ours is a Kaiser Jeep (see sig).

ralf · 03-30-2012, 12:42 AM

I am a Willys guy that brought home a 66 C10 long bed big window. But it will have to wait until I finish my 47 CJ2A.

ralf · 03-30-2012, 12:51 AM

SUZQ, got one of those too.

suzq044 · 03-30-2012, 01:09 AM

hah; mine is a '67 tho, not an 82 Laredo (tho, my Cherokee was.. and I miss it) .. lol

66fleetside · 03-30-2012, 08:37 PM

AMAZING! Got it running this afternoon. Had broken ignition wire, put on new battery cables and cleaned the plugs. The brake fluid I put in the cylinders was smoking out the carb before i even put gas to it! Nice cloud of smoke but sounds good. This is Good News!
I still could not turn crank by hand and I wonder if it was even stuck to begin with. Well onto the radiator, degreaser, new plugs cap and rotor. Damn I wish it wasn't going to snow tomorrow, the 70 degree weather a week ago was pure inspiration. !

66fleetside · 03-31-2012, 06:27 AM

I wasn't kidding about the snow, woke up to 4" !

03-27-2012, 09:16 PM	#1
66fleetside Registered User Join Date: Mar 2012 Location: Grahamsville Posts: 7	Willys Jeep guy just brought home 66 fleetside Spring arrived and the though of working on a 66 long bed from Texas versus my 52 Willys no floor fred flintstone truck won out. So far cleaned out the mice and removed the bed as wood was gone but metal is intact. Neighbor suggested 3/4 pressure treated plywood? My issue is with the straight 6. The motor seems stuck as a quick attempt with the fan belt showed. Strangely enough though the crank pulley has play to the tune of about an inch or so. I removed the belt completely tonight and could see the crank nut not moving and the pulley seems wobbly and broken. I am thinking of putting some brake fluid down the cylinders to see what happens. How can I tell if it is a 250 or 292? Where are the numbers and can I find out if the motor is original. I see Autozone and Advance both have crate engines for about $1500-$1700 bucks.

03-27-2012, 11:42 PM	#2
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Willys Jeep guy just brought home 66 fleetside Welcome aboard, I dont' know much about 6 cyl, but thought I'd bump ya to the top. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

03-28-2012, 07:24 AM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Willys Jeep guy just brought home 66 fleetside The 194/230/250 have the motor mounts directly across from each other. The 292 has staggered motor mounts with the passenger side further forward. Have you tried to turn it over with the starter?

03-28-2012, 07:25 AM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Willys Jeep guy just brought home 66 fleetside Pardon my lack of social skills, Welcome to the greatest forum you'll ever find concerning these trucks.

03-28-2012, 07:56 AM	#5
66fleetside Registered User Join Date: Mar 2012 Location: Grahamsville Posts: 7	Re: Willys Jeep guy just brought home 66 fleetside I did not try the starter yet. Originally I figured I was going to pull the motor but I am starting to rethink getting it going. I think I will put something in the cylinders, marvel or brake fluid and hook a battery. It has an alternator so I think it is 12 v. Thanks for the welcome. Last edited by 66fleetside; 03-28-2012 at 08:18 AM.

03-28-2012, 08:34 AM	#6
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Willys Jeep guy just brought home 66 fleetside The 292 also has the larger side covers on the passenger side of the block. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-29-2012, 12:13 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Willys Jeep guy just brought home 66 fleetside Welcome to the forum Another way to ID a 292 is the passenger side motor mount is between the distributor and the fuel pump. On the 230/250 it is behind both. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-29-2012, 12:17 AM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Willys Jeep guy just brought home 66 fleetside Hey 66fleetside... to a great forum and from Ohio. by the way...we luv pics __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

03-29-2012, 07:55 AM	#9
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: Willys Jeep guy just brought home 66 fleetside Hi __________________ 66 LWB/BBW work in progress 68 Camaro SS bigger work in progress 95 Roadmaster Wagon 12.36 @ 107.74 99 Hayabusa 8.72 @ 162 00 Hayabusa 9.33 @ 153

03-29-2012, 09:17 AM	#10
66fleetside Registered User Join Date: Mar 2012 Location: Grahamsville Posts: 7	Re: Willys Jeep guy just brought home 66 fleetside Thanks for the support I will post some pics soon. An update it looks like a 250 based on mounts. Yesterday I pulled the plugs and shot brake fluid down the cylinders, waited a while and put it in gear and just rocked the truck. I was delighted to see the drive shaft turn and the motor is free.! The crank pulley seems it was not tight enough or has the wrong key way and does not seem to have anything wrong. So I think now I will get new plugs, cap wires and see if I can't get some spark. I just might get it going after all. Next issue may be with the shifter linkage, It's a column shift and I would guess a three speed. This is my first column shift I thought the pattern was like an H only sideways. Problem is it only goes Up and down. Probably Reverse and First. Any one know of a Service manual to download.?

03-29-2012, 06:49 PM	#11
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: Willys Jeep guy just brought home 66 fleetside From one Jeep person to another, welcome Although, ours is a Kaiser Jeep (see sig). __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

03-30-2012, 12:42 AM	#12
ralf Registered User Join Date: Apr 2011 Location: Fayetteville WV Posts: 71	Re: Willys Jeep guy just brought home 66 fleetside I am a Willys guy that brought home a 66 C10 long bed big window. But it will have to wait until I finish my 47 CJ2A.

03-30-2012, 12:51 AM	#13
ralf Registered User Join Date: Apr 2011 Location: Fayetteville WV Posts: 71	Re: Willys Jeep guy just brought home 66 fleetside SUZQ, got one of those too.

03-30-2012, 01:09 AM	#14
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: Willys Jeep guy just brought home 66 fleetside hah; mine is a '67 tho, not an 82 Laredo (tho, my Cherokee was.. and I miss it) .. lol __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn Last edited by suzq044; 03-30-2012 at 01:16 AM.

03-30-2012, 08:37 PM	#15
66fleetside Registered User Join Date: Mar 2012 Location: Grahamsville Posts: 7	Re: Willys Jeep guy just brought home 66 fleetside AMAZING! Got it running this afternoon. Had broken ignition wire, put on new battery cables and cleaned the plugs. The brake fluid I put in the cylinders was smoking out the carb before i even put gas to it! Nice cloud of smoke but sounds good. This is Good News! I still could not turn crank by hand and I wonder if it was even stuck to begin with. Well onto the radiator, degreaser, new plugs cap and rotor. Damn I wish it wasn't going to snow tomorrow, the 70 degree weather a week ago was pure inspiration. !



Register or Log In To remove these advertisements.

03-31-2012, 06:27 AM	#16
66fleetside Registered User Join Date: Mar 2012 Location: Grahamsville Posts: 7	Re: Willys Jeep guy just brought home 66 fleetside I wasn't kidding about the snow, woke up to 4" !

Register or Log In To remove these advertisements.