|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-06-2003, 08:47 AM
|
#1 |
|
Registered User
Join Date: Dec 1999
Location: Akron, New York
Posts: 379
|
Wanted: Air Cleaner for '69 C-10, 307 2bbl
Looking for a original air cleaner for a '69 C-10 with a 307 and 2 bbl carb. Need not be clean or perfect, just usable.
Thanks
__________________
'48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks. |
|
|
|
05-06-2003, 10:12 AM
|
#2 |
|
Senior Member
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
|
sent you a pm
__________________
i have 67/72 chevy truck parts f/s. |
|
|
|
|
05-06-2003, 11:07 AM
|
#3 |
|
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
I have one... will include top the base and the riser for 20 plus shipping.
I assumed you knew the carb has a stud that comes out and you can attach it with a wing nut on the top.... if the nuts there its yours also
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! Last edited by stelth2002; 05-06-2003 at 01:26 PM. |
|
|
|
|
05-06-2003, 01:09 PM
|
#4 |
|
Senior Member
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
I have a snorkel style off of a 327 that fits a Rochester 2gv. It has the tube in the bottom that runs to the valve cover using a breather. The top has a rubber seal, and I have a 2gv spacer (excellent condition), stud, and wing nut that fits it. The only problem is the paint is flaking off a bit (black), and somebody drilled a couple of holes in the lower part to try and increase air flow.
$15 + shipping for the air cleaner. $25 + shipping for the air cleaner + spacer, stud & wing nut
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
