SD engine wiring harness no air - $30 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fredm98** · 04-15-2012, 09:19 PM

SOLD
from a 68 w.o air. Complete with outside fuseblock connector, voltage regulator and all connectors intact. Please let me know if you need more pics.

**Cash3481** · 04-15-2012, 10:50 PM

Fredm98:

Please post closer pics of the connectors and wire ends.
I'd like first shot after better pics of the wire terminations.
Are there any splices, bare spots etc?
Mike
Posted via Mobile Device

**fredm98** · 04-15-2012, 11:35 PM

Pics for Cash3481
No splices but there are three bare spots. 1. Insulation cracked on starter wire. 2. Abrasion on the main power wire. 3. Looks like a tap (for a second horn?) on the horn wire. All are within an inch or so from the ends. The headlights and turn sigs plugs are all good. Generator connectors: plastic clip and rubber boot intact.

**Cash3481** · 04-16-2012, 06:41 AM

Let me know how you want paid. I only needed the engine harness but I'll take it all anyway.
Posted via Mobile Device

**fredm98** · 04-16-2012, 08:46 PM

Quote:

Originally Posted by Cash3481

Let me know how you want paid. I only needed the engine harness but I'll take it all anyway.
Posted via Mobile Device

pm sent - thanks.

**fredm98** · 04-17-2012, 07:59 AM

Quote:

Originally Posted by fredm98

pm sent - thanks.

payment received and parts are on the way.
Thanks.

**Cash3481** · 04-17-2012, 10:25 PM

Thank you sir!
Mike
Posted via Mobile Device

**Cash3481** · 04-19-2012, 10:50 PM

Received today... Thank you!
Mike
Posted via Mobile Device

04-15-2012, 09:19 PM	#1
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	engine wiring harness no air - SOLD SOLD from a 68 w.o air. Complete with outside fuseblock connector, voltage regulator and all connectors intact. Please let me know if you need more pics. Attached Images Last edited by fredm98; 04-17-2012 at 07:58 AM.

04-15-2012, 10:50 PM	#2
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: engine wiring harness no air - $30 shipped Fredm98: Please post closer pics of the connectors and wire ends. I'd like first shot after better pics of the wire terminations. Are there any splices, bare spots etc? Mike Posted via Mobile Device

04-15-2012, 11:35 PM	#3
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	Re: engine wiring harness no air - $30 shipped Pics for Cash3481 No splices but there are three bare spots. 1. Insulation cracked on starter wire. 2. Abrasion on the main power wire. 3. Looks like a tap (for a second horn?) on the horn wire. All are within an inch or so from the ends. The headlights and turn sigs plugs are all good. Generator connectors: plastic clip and rubber boot intact. Attached Images

04-16-2012, 06:41 AM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: engine wiring harness no air - $30 shipped Let me know how you want paid. I only needed the engine harness but I'll take it all anyway. Posted via Mobile Device

04-17-2012, 10:25 PM	#7
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: engine wiring harness no air - $30 shipped Thank you sir! Mike Posted via Mobile Device

04-19-2012, 10:50 PM	#8
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: engine wiring harness no air - $30 shipped Received today... Thank you! Mike Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.