TX WTB swb driveshaft 54" long - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 04-24-2012, 01:37 PM

I am looking for a one piece driveshaft for my 70 swb truck that I swapped a 700r4 into. In the past, I have found that the later model one piece drivshafts will fit. I am not sure if it has to be out of a truck originally equipped with a 700r4 or not, but it does need to be 54" long.

Mr.C · 04-24-2012, 06:27 PM

I have a 2 pc I won't be using...
Posted via Mobile Device

Downtown · 04-25-2012, 07:21 AM

Several years ago when I did mine, I used one out of 1982-89 chevy caprice.
I just just changed the rear universal. Hope this helps.

Mark

**WIDESIDE72** · 05-03-2012, 10:45 PM

Ttt

Del72Chevy · 05-04-2012, 12:45 AM

I did the same thing you are doing now with the 700r4 and the funny thing is I am going to have to go to a two piece since I ordered a porterbuilt dropmember kit but I guess that is a good problem to have. As a side note no regrets at all installing the 700r4 except the shop that did the swap backed my truck into a tool box.

asolde · 05-04-2012, 07:29 AM

C10 Pickup Driveshaft - $40 (Porter)

--------------------------------------------------------------------------------
Date: 2012-04-29, 6:48PM CDT
Reply to: dszx4-2945462122@sale.craigslist.org [Errors when replying to ads?]
--------------------------------------------------------------------------------

Driveshaft from my 69 C10 short wheelbase with a TH350 and 12 bolt rear. Driveshaft is 55" long u joint to u joint. Its a 3" steel driveshaft, 1310 style u joints and a 27 spline yoke. In average condition, was too short for my engine/trans swap. $40 obo

Pmarti69 · 05-04-2012, 11:39 AM

I am swapping out my 700r4 out for TH400 and have the driveshaft on the truck that I planned on taking off this weekend. I will measure and post a pic, this afternoon.

**WIDESIDE72** · 05-04-2012, 03:52 PM

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

asolde · 05-04-2012, 04:10 PM

Quote:

Originally Posted by WIDESIDE72

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

That's ok I found that add in craigslist and posted it up for you.

**LEEVON** · 05-04-2012, 05:52 PM

I'm fairly certain that 88-98 swb 2wd shafts are very close to this...

Pmarti69 · 05-04-2012, 08:23 PM

Quote:

Originally Posted by WIDESIDE72

asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

Here are some pictures for you. let me know what you think. I can bring it with me tomorrow if interested.

**WIDESIDE72** · 05-05-2012, 11:48 PM

ds purchased from pmarti. Thanks Paul!

HotRod C/10 · 05-05-2012, 11:53 PM

Let us know how this workes out for fit........I am doing the same combo.

**WIDESIDE72** · 05-06-2012, 07:30 AM

Quote:

Originally Posted by DSALRAM

Let us know how this workes out for fit........I am doing the same combo.

It may be a while before I get this one in, but it came out of Pmarti's truck, swb 71/72 GMC with a 700r4. I already have one in my dad's 72 Chevy swb step w/ 700r4 that came out of an 85 swb step... "Like a glove"...

**WIDESIDE72** · 05-06-2012, 07:33 AM

Ace Ventura - "Like a glove" Scene ...

**WIDESIDE72** · 05-06-2012, 07:34 AM

This is usually how I work on 67-72's

Bluto's Advice - YouTube

So the ease of the DS install was a shock!

Pmarti69 · 05-06-2012, 10:18 AM

Quote:

Originally Posted by WIDESIDE72

ds purchased from pmarti. Thanks Paul!

No Prob, anytime

**WIDESIDE72** · 10-07-2012, 10:59 AM

I am in the market for another one of these if anyone has one in their "pile".
Posted via Mobile Device

*mrdana60* · 10-07-2012, 11:21 AM

I got one 55 center to center of u joint.will that work?

**WIDESIDE72** · 10-08-2012, 01:14 AM

Quote:

Originally Posted by mrdana60

I got one 55 center to center of u joint.will that work?

That would work. How much for it shipped to Leander Tx 78741?
Posted via Mobile Device

*mrdana60* · 10-08-2012, 09:10 AM

50 plus shipping?

**WIDESIDE72** · 10-08-2012, 04:21 PM

Quote:

Originally Posted by mrdana60

50 plus shipping?

Nothing wrong with the price, but I would like to give it a little time to see if I can find something local to save on shipping.

*mrdana60* · 10-08-2012, 04:54 PM

Could do 80 shipped?

04-24-2012, 01:37 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	WTB swb driveshaft 54" long I am looking for a one piece driveshaft for my 70 swb truck that I swapped a 700r4 into. In the past, I have found that the later model one piece drivshafts will fit. I am not sure if it has to be out of a truck originally equipped with a 700r4 or not, but it does need to be 54" long.

04-24-2012, 06:27 PM	#2
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: WTB swb driveshaft 54" long I have a 2 pc I won't be using... Posted via Mobile Device __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

04-25-2012, 07:21 AM	#3
Downtown Senior Member Join Date: Dec 1999 Location: New Palestine, IN Posts: 470	Re: WTB swb driveshaft 54" long Several years ago when I did mine, I used one out of 1982-89 chevy caprice. I just just changed the rear universal. Hope this helps. Mark __________________ 72 Shortbed fleetside 402 BB, AC, Posi 72 Super Cheyenne Longbed 350 49,000 original miles and My dad ordered it new 66 Chevy Caprice 2 dr 74 Honda CB750 New Palestine, IN

05-03-2012, 10:45 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB swb driveshaft 54" long Ttt

05-04-2012, 12:45 AM	#5
Del72Chevy Registered User Join Date: Jun 2009 Location: Claymont DE Posts: 225	Re: WTB swb driveshaft 54" long I did the same thing you are doing now with the 700r4 and the funny thing is I am going to have to go to a two piece since I ordered a porterbuilt dropmember kit but I guess that is a good problem to have. As a side note no regrets at all installing the 700r4 except the shop that did the swap backed my truck into a tool box.

05-04-2012, 07:29 AM	#6
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: WTB swb driveshaft 54" long C10 Pickup Driveshaft - $40 (Porter) -------------------------------------------------------------------------------- Date: 2012-04-29, 6:48PM CDT Reply to: dszx4-2945462122@sale.craigslist.org [Errors when replying to ads?] -------------------------------------------------------------------------------- Driveshaft from my 69 C10 short wheelbase with a TH350 and 12 bolt rear. Driveshaft is 55" long u joint to u joint. Its a 3" steel driveshaft, 1310 style u joints and a 27 spline yoke. In average condition, was too short for my engine/trans swap. $40 obo

05-04-2012, 11:39 AM	#7
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: WTB swb driveshaft 54" long I am swapping out my 700r4 out for TH400 and have the driveshaft on the truck that I planned on taking off this weekend. I will measure and post a pic, this afternoon. __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

05-04-2012, 03:52 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB swb driveshaft 54" long asolde, sounds ok, but I already made palns w/ pmarti to buy the radiator from him, so I am going to see if I can work something out with him on the ds as well. If that doesnt work out, I willl let you know ASAP. Your price is definitely fair!

05-04-2012, 05:52 PM	#10
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: WTB swb driveshaft 54" long I'm fairly certain that 88-98 swb 2wd shafts are very close to this... __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-05-2012, 11:48 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB swb driveshaft 54" long ds purchased from pmarti. Thanks Paul!

05-05-2012, 11:53 PM	#13
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB swb driveshaft 54" long Let us know how this workes out for fit........I am doing the same combo. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

10-07-2012, 10:59 AM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB swb driveshaft 54" long I am in the market for another one of these if anyone has one in their "pile". Posted via Mobile Device

10-07-2012, 11:21 AM	#19
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB swb driveshaft 54" long I got one 55 center to center of u joint.will that work?

10-08-2012, 09:10 AM	#21
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB swb driveshaft 54" long 50 plus shipping?

10-08-2012, 04:54 PM	#23
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB swb driveshaft 54" long Could do 80 shipped?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.