VA Price Reduced Tach dash with vacuum - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 04-26-2012, 08:07 PM

Offering this one up as a discount compared to my normal restored tach/vac setups because it's nice.....but not perfect. Vac gauge works. has very slight discoloration as do a few other gauges
Plus, the new bezel has some light wear to the black painted area.

Price reduced to 340 shipped firm or 360 shipped with another bezel swapped in place of this one (black/chrome or woodgrain overlay..) CONUS. Will include a wiring harness.

New pictures uploaded...note back tins were all blasted and painted. New printed circuit.

VA72C10 · 04-26-2012, 09:29 PM

This has a new printed circuit and bezel...

VA72C10 · 04-27-2012, 04:06 PM

ttt...restored tach dash with vacuum.....

VA72C10 · 04-28-2012, 01:09 AM

better pictures (still not great

) uploaded

VA72C10 · 04-28-2012, 01:10 AM

If someone is looking to save some $$$, I will install another tach I have that is working but has some slight discoloration and will take another 35 off the price....(350 shipped)

VA72C10 · 04-28-2012, 09:36 PM

ttt

VA72C10 · 04-30-2012, 02:46 AM

ttt...monitor your engine rpm's and vacuum levels...helps dialing in the tuning and diagnosing performance issues...

Quote:

Diagnosing/trouble shooting
Fortunately a lot of different faults can be found with a vacuum gauge, because the behavior of the needle is different to most situations. Here are the 7 most common scenarios (engine idling and warm):

Steady needle, at 15-22: Engine in good condition. (An engine with long duration camshaft will have a lower vacuum and a less steady needle, maybe 10-15 with 1-2 “jerks”. That’s still an engine in good condition)
Steady needle, lower than normal: Ignition timing too late or vacuum leakage
Steady needle like in 1. but occasionally fluctuates at idle: Ignition miss or sticking valve
Steady needle like in 1. but drops regularly: Valves need adjustment or burnt valve
Floating needle, maybe in the area 10-20: Carb out of adjustment or vacuum leakage
Shaking needle, becomes worse as rpm increases: Ignition miss, blown head gasket
Shaking needle, becomes steady as rpm increases: Worn valve guides

VA72C10 · 04-30-2012, 03:45 PM

ttt

VA72C10 · 05-01-2012, 11:21 PM

ttt

vman1213 · 05-02-2012, 07:52 PM

nice!

VA72C10 · 05-02-2012, 11:01 PM

Quote:

Originally Posted by vman1213

nice!

thanks!

VA72C10 · 05-04-2012, 01:39 PM

ttt

VA72C10 · 05-10-2012, 07:32 PM

350 shipped FIRM in CONUS...

**Already Gone** · 05-10-2012, 07:38 PM

TTT
Posted via Mobile Device

HotRod C/10 · 05-10-2012, 08:35 PM

Thats Beautimus!

**72peace** · 05-11-2012, 08:24 AM

Is there anything you might consider in trade? I'm disassembling a truck hopefully this weekend.

Rebuilding a DD on a broken shoestring

shawno72 · 05-11-2012, 09:07 AM

Do you have just a tach head you would like to sell or a good used printed circuit at a fair price?

Posted via Mobile Device

VA72C10 · 05-11-2012, 01:58 PM

Quote:

Originally Posted by Already Gone

TTT
Posted via Mobile Device

Quote:

Originally Posted by DSALRAM

Thats Beautimus!

thanks

Quote:

Originally Posted by 72peace

Is there anything you might consider in trade? I'm disassembling a truck hopefully this weekend.

Rebuilding a DD on a broken shoestring

I guess it depends but I really want to trade it for $350 cash

Quote:

Originally Posted by shawno72

Do you have just a tach head you would like to sell or a good used printed circuit at a fair price?

Posted via Mobile Device

I really don't have any extras I can sell cheap...if I sell them it's one less factory dash I can make...

shawno72 · 05-11-2012, 02:36 PM

Ok well thought I would try

Posted via Mobile Device

**72peace** · 05-11-2012, 04:13 PM

What about a vintage aftermarket cruise control, yea...you could use that...couldn't you...yea...you could.

VA72C10 · 05-12-2012, 12:43 PM

Sorry, that's cool but prefer cash right now.
Posted via Mobile Device

**72peace** · 05-12-2012, 06:10 PM

It was worth a try.

Cheers,

VA72C10 · 05-15-2012, 02:01 AM

ttt

VA72C10 · 05-16-2012, 11:42 PM

ttt....will be taking to Super Chevy swap meet Friday

VA72C10 · 05-20-2012, 11:37 PM

ttt...still have this. Will replace with a new bezel with no defects for 375 shipped

04-26-2012, 08:07 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Price Reduced Tach dash with vacuum Offering this one up as a discount compared to my normal restored tach/vac setups because it's nice.....but not perfect. Vac gauge works. has very slight discoloration as do a few other gauges Plus, the new bezel has some light wear to the black painted area. Price reduced to 340 shipped firm or 360 shipped with another bezel swapped in place of this one (black/chrome or woodgrain overlay..) CONUS. Will include a wiring harness. New pictures uploaded...note back tins were all blasted and painted. New printed circuit. Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 05-27-2012 at 01:58 AM.

04-26-2012, 09:29 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum This has a new printed circuit and bezel... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-27-2012, 04:06 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt...restored tach dash with vacuum..... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-28-2012, 01:09 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum better pictures (still not great ) uploaded __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-28-2012, 01:10 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum If someone is looking to save some $$$, I will install another tach I have that is working but has some slight discoloration and will take another 35 off the price....(350 shipped) __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-28-2012, 09:36 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-30-2012, 03:45 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-01-2012, 11:21 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-02-2012, 07:52 PM	#10
vman1213 Registered User Join Date: May 2010 Location: Sanger CA Posts: 84	Re: Tach dash with vacuum nice!

05-04-2012, 01:39 PM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-10-2012, 07:32 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum 350 shipped FIRM in CONUS... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-10-2012, 07:38 PM	#14
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Tach dash with vacuum TTT Posted via Mobile Device __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-10-2012, 08:35 PM	#15
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Tach dash with vacuum Thats Beautimus! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

05-11-2012, 08:24 AM	#16
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tach dash with vacuum Is there anything you might consider in trade? I'm disassembling a truck hopefully this weekend. Rebuilding a DD on a broken shoestring

05-11-2012, 09:07 AM	#17
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Tach dash with vacuum Do you have just a tach head you would like to sell or a good used printed circuit at a fair price? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

05-11-2012, 02:36 PM	#19
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Tach dash with vacuum Ok well thought I would try Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-11-2012, 04:13 PM	#20
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tach dash with vacuum What about a vintage aftermarket cruise control, yea...you could use that...couldn't you...yea...you could. Attached Images

05-12-2012, 12:43 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum Sorry, that's cool but prefer cash right now. Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-12-2012, 06:10 PM	#22
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tach dash with vacuum It was worth a try. Cheers,

05-15-2012, 02:01 AM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2012, 11:42 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt....will be taking to Super Chevy swap meet Friday __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-20-2012, 11:37 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash with vacuum ttt...still have this. Will replace with a new bezel with no defects for 375 shipped __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.