MI Gauge Parts Lot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 04-26-2012, 10:04 PM

32 Gauges of various condition, cores to driver (and a few NICE

ones)

7 - Fuel Gauge - brake/temp
1 - Fuel Gauge - tandem/overspeed
6 - Early Style Speedometers
3 - Late Style Speedometers
5 - Amp
5 - Temp
5 - Oil - 60lb

$200 Shipped for the lot, that's only $6.25 per gauge!!!
Thx, D

**70STOVEBOLT** · 04-27-2012, 12:51 PM

What 's the diff between early and late speedos?

**DaHos** · 04-27-2012, 01:42 PM

The only diff is the high beam light hole is rectangle and the late style is round.
Posted via Mobile Device

**70STOVEBOLT** · 04-27-2012, 01:49 PM

Ah, never knew that. Thanks.

**DaHos** · 04-29-2012, 09:59 AM

Offers, Trade?

**DaHos** · 05-01-2012, 07:55 AM

Act now and receive an original for repair V8 TACH with purchase. Needle moves, face is rough, circuit looks good.

Trade for, NOS bezel, Vac gauge, tach/vac lens, circuit, tach cluster tins etc....

**70shortfleet** · 05-01-2012, 08:58 AM

I'm interested in the tach, can you post a pic of the tach? I have a few of the parts you listed for trade. What does (for repair) mean exactly?

**DaHos** · 05-01-2012, 09:41 PM

Quote:

Originally Posted by 70shortfleet

I'm interested in the tach, can you post a pic of the tach? I have a few of the parts you listed for trade. What does (for repair) mean exactly?

"For repair" means I don't know if it works or not and sold as is. To those handy at this kind of thing it might be worth a go? Here are some pics...

**70shortfleet** · 05-01-2012, 10:05 PM

I'll trade you a rear tach tin for the tach. Does it have the back housing?

**DaHos** · 05-02-2012, 06:23 PM

Quote:

Originally Posted by 70shortfleet

I'll trade you a rear tach tin for the tach. Does it have the back housing?

Keeping the tach with the gauge parts lot. I do have a rear tach tin but was going to hang on to it, If its the deal breaker I will throw it in as I see the NOS ones do have it on them.

Funny selling 33 gauges to buy 1 ...........oh' the hobby.....

**DaHos** · 05-06-2012, 09:41 AM

Weekend Bmp !!

**DaHos** · 05-08-2012, 06:09 PM

Will sell singles if interested.............

Condition Varies:

60lb oil, amp, temp, fuel, speedo, vac and tach.

**DaHos** · 06-09-2012, 09:06 AM

TTT - Great deal here folks !!!!!

Singles or combo make me an Offer........

shawno72 · 06-09-2012, 10:41 AM

Quote:

Originally Posted by DaHos

Will sell singles if interested.............

Condition Varies:

60lb oil, amp, temp, fuel, speedo, vac and tach.

How much for the vac shipped to 95240? And do you have any early speedo's that still have the green tint on the face?

*sharpie1972* · 06-09-2012, 11:06 AM

How much for the two oil gauges that still have backing plates shipped to 81521? Thanks, Sharpie

**DaHos** · 06-09-2012, 11:17 AM

Quote:

Originally Posted by shawno72

How much for the vac shipped to 95240? And do you have any early speedo's that still have the green tint on the face?

The vac needs re screening but works, and I do have a NICE ! "green" early style speedo needs nothing but dusting off and needle repainted.. $60 shipped for the pair.

**DaHos** · 06-09-2012, 11:19 AM

Quote:

Originally Posted by sharpie1972

How much for the two oil gauges that still have backing plates shipped to 81521? Thanks, Sharpie

I'll do $40 for a pair of nice 60lb'ers with plates

shawno72 · 06-09-2012, 11:27 AM

Ok how much for just the speedo and can you paint the needle?

**DaHos** · 06-09-2012, 11:36 AM

Quote:

Originally Posted by shawno72

Ok how much for just the speedo and can you paint the needle?

$25 shipped as is. If you have a particular color you want Ill buy it and paint it for an extra $5.

I just would hate for it not to match your other gauges.......I know it would bug me !!!!

shawno72 · 06-09-2012, 11:44 AM

Quote:

Originally Posted by DaHos

$25 shipped as is. If you have a particular color you want Ill buy it and paint it for an extra $5.

I just would hate for it not to match your other gauges.......I know it would bug me !!!!

Well it's going into a cluster with all NOS gauges so I would want the factory color. I'll give you the extra $5 no problem.

**DaHos** · 06-09-2012, 11:54 AM

Quote:

Originally Posted by shawno72

Well it's going into a cluster with all NOS gauges so I would want the factory color. I'll give you the extra $5 no problem.

Let me check some colors against some of my NOS gauges, Ill post some pics this afternoon.......hang tight....

shawno72 · 06-09-2012, 12:13 PM

Quote:

Originally Posted by DaHos

Let me check some colors against some of my NOS gauges, Ill post some pics this afternoon.......hang tight....

Thank you so much, I'll wait for your response

**jocko** · 06-09-2012, 12:16 PM

very nice collection of gauges - quick question for you - how does one go about "re-screening" a gauge face? Send off to the "re-screener" or is there a homemade way to apply/do (as you can see, I'm not familiar with the process, but hear about it all the time). Thanks!

**DaHos** · 06-09-2012, 12:30 PM

Quote:

Originally Posted by jocko

very nice collection of gauges - quick question for you - how does one go about "re-screening" a gauge face? Send off to the "re-screener" or is there a homemade way to apply/do (as you can see, I'm not familiar with the process, but hear about it all the time). Thanks!

Re-screen here:

http://www.redlineg.com/redlineg/Welcome.html

Or you can also get overlays here:

http://www.whitegauges.net/

**DaHos** · 06-09-2012, 07:51 PM

Quote:

Originally Posted by shawno72

Thank you so much, I'll wait for your response

This is IT !!!! Tach or temp gauge have not been repainted. The color on the round end of the needle is the match.

04-26-2012, 10:04 PM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Gauge Parts Lot 32 Gauges of various condition, cores to driver (and a few NICE ones) 7 - Fuel Gauge - brake/temp 1 - Fuel Gauge - tandem/overspeed 6 - Early Style Speedometers 3 - Late Style Speedometers 5 - Amp 5 - Temp 5 - Oil - 60lb $200 Shipped for the lot, that's only $6.25 per gauge!!! Thx, D Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-27-2012, 12:51 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Gauge Parts Lot What 's the diff between early and late speedos? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-27-2012, 01:42 PM	#3
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot The only diff is the high beam light hole is rectangle and the late style is round. Posted via Mobile Device __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-27-2012, 01:49 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Gauge Parts Lot Ah, never knew that. Thanks. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-29-2012, 09:59 AM	#5
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot Offers, Trade? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

05-01-2012, 07:55 AM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot Act now and receive an original for repair V8 TACH with purchase. Needle moves, face is rough, circuit looks good. Trade for, NOS bezel, Vac gauge, tach/vac lens, circuit, tach cluster tins etc.... __________________ 1967 C10 SWB Owner - Rustbelt Restorations Last edited by DaHos; 05-08-2012 at 06:07 PM.

05-01-2012, 08:58 AM	#7
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Re: Gauge Parts Lot I'm interested in the tach, can you post a pic of the tach? I have a few of the parts you listed for trade. What does (for repair) mean exactly?

05-01-2012, 10:05 PM	#9
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Re: Gauge Parts Lot I'll trade you a rear tach tin for the tach. Does it have the back housing?

05-06-2012, 09:41 AM	#11
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot Weekend Bmp !! __________________ 1967 C10 SWB Owner - Rustbelt Restorations

05-08-2012, 06:09 PM	#12
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot Will sell singles if interested............. Condition Varies: 60lb oil, amp, temp, fuel, speedo, vac and tach. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

06-09-2012, 09:06 AM	#13
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Gauge Parts Lot TTT - Great deal here folks !!!!! Singles or combo make me an Offer........ __________________ 1967 C10 SWB Owner - Rustbelt Restorations

06-09-2012, 11:06 AM	#15
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gauge Parts Lot How much for the two oil gauges that still have backing plates shipped to 81521? Thanks, Sharpie

06-09-2012, 11:27 AM	#18
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Gauge Parts Lot Ok how much for just the speedo and can you paint the needle? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-09-2012, 12:16 PM	#23
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Gauge Parts Lot very nice collection of gauges - quick question for you - how does one go about "re-screening" a gauge face? Send off to the "re-screener" or is there a homemade way to apply/do (as you can see, I'm not familiar with the process, but hear about it all the time). Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.