IN Pair 68 doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 05-01-2012, 01:33 PM

It is a shame the passenger door has typical rust issue on hinge area because the outer skin is flawless as is the rest. Pretty unique green interior option with solid nice color armrest and totally in tact vinyl. Some fade but these are hard to find without rips so I am pleased. I will be pulling the panels off this afternoon. Very Nice below eyeline mirror brackets but aftermarket heads. The brackets are very nice though as seen.

Driver side door is def. salvageable for anyone interested.

soft ray and super rubbers on chrome vents- some pitting $77.25 shipped

Door panels- $77.25 shipped

Arm rests- $30.90 shipped $10+ of that is med. flat rate ship.

Will sell complete doors for real good price.

Mirror brackets with after market heads- $51.50shipped OBO

Doors are sold local today.

HeavyMetalChevy · 05-01-2012, 01:37 PM

more

**70STOVEBOLT** · 05-01-2012, 04:43 PM

Duane, is the rust on the drivers door just surface? What other bad spots does it have? I already bought a passenger side door from you, now I need a driver side.

HeavyMetalChevy · 05-01-2012, 04:53 PM

Quote:

Originally Posted by 70STOVEBOLT

Duane, is the rust on the drivers door just surface? What other bad spots does it have? I already bought a passenger side door from you, now I need a driver side.

The rust spot on the driver outer skin I hit with a grinder. You can see it in pic three somewhat. The doors had been repainted (decent job) and it was bubbled there from poor adhesion. There is a small rust hole there but could just be spot welded and ground out. I could do it.

HeavyMetalChevy · 05-01-2012, 04:56 PM

here are more pics of driver.. The underbelly is weird. The corners are solid but there is like a "wrinkle in it. Never quite seen one like it. I will get better pics later. Light was messing pics up. I will blast the underbelly to investigate further. I have another REALLY solid driver now but trying to make pairs. I have like 13 pass. doors!!! lmao I will see what we can work out though

**richard2717** · 05-01-2012, 06:31 PM

Duane,
Do you have a nice pair of 72' doors? with guts and crome wing vents? Not worried about interior panels. I could also use a pair of 71' doors as well but don't NEED them anytime soon. shipping would be to commercial 21826 with forklift

Do you know of any good shipping companies

Thanks
Richard

HeavyMetalChevy · 05-01-2012, 06:39 PM

Quote:

Originally Posted by richard2717

Duane,
Do you have a nice pair of 72' doors? with guts and crome wing vents? Not worried about interior panels. I could also use a pair of 71' doors as well but don't NEED them anytime soon. shipping would be to commercial 21826 with forklift

Do you know of any good shipping companies

Thanks
Richard

I might have a few passengers.. i will track down some driver and let you know. Cool Cool

Mayo · 05-01-2012, 07:13 PM

How about the door panel retainer trim?

HeavyMetalChevy · 05-01-2012, 07:17 PM

Quote:

Originally Posted by Mayo

How about the door panel retainer trim?

I have perfect ones. $46.35 shipped. They have no pitting what so ever.

Mayo · 05-01-2012, 07:23 PM

Quote:

Originally Posted by HeavyMetalChevy

I have perfect ones. $46.35 shipped. They have no pitting what so ever.

I'll take them.

Is that your set price for me?

HeavyMetalChevy · 05-01-2012, 07:26 PM

Quote:

Originally Posted by Mayo

I'll take them.

Is that your set price for me?

Yeah I do not want to get a rep for price gauging but when my parts are like new... and then you see the price of repops...Somethings got to give. I do this for the hobby, passion, and camaraderie... but I can't go bankrupt either.

Mayo · 05-01-2012, 07:36 PM

I'm not complaining, I just think it is funny the two items I have bought from you have been the same price.

HeavyMetalChevy · 05-01-2012, 07:58 PM

Quote:

Originally Posted by Mayo

I'm not complaining, I just think it is funny the two items I have bought from you have been the same price.

ah hah... I always add paypal feesand shipping in so I can offer the same price to everyone. I know the oddball dollars a cents got to throw a few people off. Like 14.71...wth he come up with that?? lol

Mayo · 05-01-2012, 08:41 PM

Do you have any black vinyl door panels?
Posted via Mobile Device

HeavyMetalChevy · 05-01-2012, 09:34 PM

Quote:

Originally Posted by Mayo

Do you have any black vinyl door panels?
Posted via Mobile Device

what year? I got some 72 plastics coming I am going to restore. I also have some metal ones I have blasted or could paint or whatev

Mayo · 05-02-2012, 05:12 PM

Quote:

Originally Posted by HeavyMetalChevy

what year? I got some 72 plastics coming I am going to restore. I also have some metal ones I have blasted or could paint or whatev

68. I currently have metal ones covered in blue vinyl but I am switching my interior over to black.

HeavyMetalChevy · 05-04-2012, 02:19 AM

ttt

HeavyMetalChevy · 05-08-2012, 10:36 PM

ttt

HeavyMetalChevy · 05-10-2012, 09:03 PM

offers want these interior parts gone as well. Driver door $100 complete with guts

ixnay · 05-18-2012, 03:27 PM

Do you have a 68 passenger door panel, black, with trim. And a cherry on top?

I can paint vinyl. Please let me know what you've got.

MJH

HeavyMetalChevy · 05-18-2012, 03:52 PM

Quote:

Originally Posted by ixnay

Do you have a 68 passenger door panel, black, with trim. And a cherry on top?

I can paint vinyl. Please let me know what you've got.

MJH

No I just have these green ones as of now. I have got the driver off working on the pass. The screw broke off and I drilled it out but it is hanging up on the panel and being a pain in the arse.

ixnay · 05-18-2012, 04:07 PM

Quote:

Originally Posted by HeavyMetalChevy

No I just have these green ones as of now. I have got the driver off working on the pass. The screw broke off and I drilled it out but it is hanging up on the panel and being a pain in the arse.

I feel your pain. When I took the arm-rests off, the DS was a bear. A PO had used a two different screws--the first was phillips, metal, fine thread; the second was standard, sheet-metal/wood. Of course, you cannot see inside the rest to figure out what's going on. I cussed and I swore. I even took a hack-saw to it. Now, of course, it's mounted properly.

When you get the panel off, drop me a line.

ixnay · 06-25-2012, 07:43 PM

Any luck getting that panel off yet?

MJH

ixnay · 07-01-2012, 09:44 PM

Quote:

Originally Posted by ixnay

Any luck getting that panel off yet?

MJH

Never mind. Found some other panels.

MJH

05-01-2012, 01:33 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Pair 68 doors It is a shame the passenger door has typical rust issue on hinge area because the outer skin is flawless as is the rest. Pretty unique green interior option with solid nice color armrest and totally in tact vinyl. Some fade but these are hard to find without rips so I am pleased. I will be pulling the panels off this afternoon. Very Nice below eyeline mirror brackets but aftermarket heads. The brackets are very nice though as seen. Driver side door is def. salvageable for anyone interested. soft ray and super rubbers on chrome vents- some pitting $77.25 shipped Door panels- $77.25 shipped Arm rests- $30.90 shipped $10+ of that is med. flat rate ship. Will sell complete doors for real good price. Mirror brackets with after market heads- $51.50shipped OBO Doors are sold local today. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 05-12-2012 at 11:25 PM.

05-01-2012, 01:37 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Pair 68 doors more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-01-2012, 04:43 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,264	Re: Pair 68 doors Duane, is the rust on the drivers door just surface? What other bad spots does it have? I already bought a passenger side door from you, now I need a driver side. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-01-2012, 04:56 PM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Pair 68 doors here are more pics of driver.. The underbelly is weird. The corners are solid but there is like a "wrinkle in it. Never quite seen one like it. I will get better pics later. Light was messing pics up. I will blast the underbelly to investigate further. I have another REALLY solid driver now but trying to make pairs. I have like 13 pass. doors!!! lmao I will see what we can work out though Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-01-2012, 06:31 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: Pair 68 doors Duane, Do you have a nice pair of 72' doors? with guts and crome wing vents? Not worried about interior panels. I could also use a pair of 71' doors as well but don't NEED them anytime soon. shipping would be to commercial 21826 with forklift Do you know of any good shipping companies Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-01-2012, 07:13 PM	#8
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Pair 68 doors How about the door panel retainer trim? __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

05-01-2012, 07:36 PM	#12
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Pair 68 doors I'm not complaining, I just think it is funny the two items I have bought from you have been the same price. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

05-01-2012, 08:41 PM	#14
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Pair 68 doors Do you have any black vinyl door panels? Posted via Mobile Device __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

05-04-2012, 02:19 AM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Pair 68 doors ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-08-2012, 10:36 PM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Pair 68 doors ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-10-2012, 09:03 PM	#19
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Pair 68 doors offers want these interior parts gone as well. Driver door $100 complete with guts __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-18-2012, 03:27 PM	#20
ixnay Registered User Join Date: Jun 2009 Location: Lake O, Oregon Posts: 156	Re: Pair 68 doors Do you have a 68 passenger door panel, black, with trim. And a cherry on top? I can paint vinyl. Please let me know what you've got. MJH __________________ A man has two reasons for doing something: the reason he tells you and the real reason. J.P. Morgan. It's an honor to serve.

06-25-2012, 07:43 PM	#23
ixnay Registered User Join Date: Jun 2009 Location: Lake O, Oregon Posts: 156	Re: Pair 68 doors Any luck getting that panel off yet? MJH __________________ A man has two reasons for doing something: the reason he tells you and the real reason. J.P. Morgan. It's an honor to serve.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.