MD Bucket Seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 05-02-2012, 08:30 AM

These seats are from a '72 Blazer I owned since '83 I bought for parts. They are listed here because,as we all know,these are the same as pickup seats when the passenger seat mounts are changed. Condition can be seen in the photos. The passenger side outer skirt pan is rusted out along the bottom edge (how that happens beats me). The hog ring hooks are there but a piece will need to be added to provide a good bottom edge. I've done this before and it's really not a big deal. The foam on the passenger side is great and on the drivers side...no comment,see pic. If you're like me you'll want to replace all foam to assure a snug fit for the covers,no matter the condition of the old foam. You might skate by with the passenger side,but that's up to you. These seats were from base Blazer and can be CST or Highlander seats with the proper covers.................................... Sold...Thanks

**special-K** · 05-02-2012, 08:48 AM

I have a set of truck passenger side mounts available or for a Blazer/Jimmy/Suburban I also have black seat backs and a very nice black cup holder console. None of these are being offered for sale at this point,except to whoever may be interested in this seats.

**29od1** · 05-02-2012, 09:13 AM

I'm interested in them with the Blazer brackets. Don't need the backs. How much shipped to 67210? Also can you post pics of the console and price with seats?

Thanks,
David

**special-K** · 05-02-2012, 08:33 PM

Ok David,I'll check into a shipping cost to your zip. Also,would Greyhound work if they are the cheapest? I can almost guarantee they will be. I'll PM you pictures of the console w/price. I'll buy a scale tomorrow. Mine just gave up the ghost on Sunday.

**29od1** · 05-02-2012, 09:42 PM

Yeah whichever way is cheaper is good. Greyhound is close to where I work so that would be fine.

VA72C10 · 05-02-2012, 11:56 PM

I'll take them if he doesn't.

As far as shipping, the cheapest way is in a u-haul wardrobe box or similar....turn one upside down on top of the other and put the brackets in between... or ship the brackets separate to keep the weight down...

**special-K** · 05-03-2012, 09:04 PM

Quote:

Originally Posted by 29od1

Yeah whichever way is cheaper is good. Greyhound is close to where I work so that would be fine.

Looks like it will be Greyhound by a mile (get the pun?) PM sent.

Quote:

Originally Posted by VA72C10

I'll take them if he doesn't.

As far as shipping, the cheapest way is in a u-haul wardrobe box or similar....turn one upside down on top of the other and put the brackets in between... or ship the brackets separate to keep the weight down...

Ok,you're on deck if this deal doesn't work out.

**29od1** · 05-03-2012, 10:09 PM

Got it and sent one about the console.

Looks like a greyhound won... he usually does

**special-K** · 05-05-2012, 07:52 AM

Sold...Thanks!

05-02-2012, 08:30 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Bucket Seats These seats are from a '72 Blazer I owned since '83 I bought for parts. They are listed here because,as we all know,these are the same as pickup seats when the passenger seat mounts are changed. Condition can be seen in the photos. The passenger side outer skirt pan is rusted out along the bottom edge (how that happens beats me). The hog ring hooks are there but a piece will need to be added to provide a good bottom edge. I've done this before and it's really not a big deal. The foam on the passenger side is great and on the drivers side...no comment,see pic. If you're like me you'll want to replace all foam to assure a snug fit for the covers,no matter the condition of the old foam. You might skate by with the passenger side,but that's up to you. These seats were from base Blazer and can be CST or Highlander seats with the proper covers.................................... Sold...Thanks Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-10-2012 at 04:05 PM.

05-02-2012, 08:48 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Bucket Seats I have a set of truck passenger side mounts available or for a Blazer/Jimmy/Suburban I also have black seat backs and a very nice black cup holder console. None of these are being offered for sale at this point,except to whoever may be interested in this seats. Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-02-2012, 09:13 AM	#3
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Bucket Seats I'm interested in them with the Blazer brackets. Don't need the backs. How much shipped to 67210? Also can you post pics of the console and price with seats? Thanks, David

05-02-2012, 08:33 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Bucket Seats Ok David,I'll check into a shipping cost to your zip. Also,would Greyhound work if they are the cheapest? I can almost guarantee they will be. I'll PM you pictures of the console w/price. I'll buy a scale tomorrow. Mine just gave up the ghost on Sunday. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-02-2012, 09:42 PM	#5
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Bucket Seats Yeah whichever way is cheaper is good. Greyhound is close to where I work so that would be fine.

05-02-2012, 11:56 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Bucket Seats I'll take them if he doesn't. As far as shipping, the cheapest way is in a u-haul wardrobe box or similar....turn one upside down on top of the other and put the brackets in between... or ship the brackets separate to keep the weight down... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-03-2012, 10:09 PM	#8
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Bucket Seats Got it and sent one about the console. Looks like a greyhound won... he usually does

05-05-2012, 07:52 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Bucket Seats Sold...Thanks! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-10-2012 at 04:06 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.