Factory pinstripe/ w lower moldings?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 05-31-2012, 07:44 AM

Was the factory pinstripe available on a truck with lower moldings?

Thanks,
Ray

**70cst** · 05-31-2012, 11:25 AM

Quote:

Originally Posted by 72 Super

Was the factory pinstripe available on a truck with lower moldings?

Thanks,
Ray

I didn't realize these trucks came from the factory with pin striping...

Always learning something new.

SS Tim · 05-31-2012, 12:15 PM

The D96 paint stripe was available with a few exclusions but could be had with lower body moldings ('72 shown).

ls1nova71 · 05-31-2012, 12:23 PM

I was going to say yes, and that mu buddy Joesjunk has one, but ss tim already posted a pic of it.
Posted via Mobile Device

**72 Super** · 05-31-2012, 04:17 PM

Quote:

Originally Posted by 70cst

I didn't realize these trucks came from the factory with pin striping...

Always learning something new.

I haven't seen many myself. Mostly you will see them on original paint trucks, very rare to see a restored/repainted truck with them put back on. I have only seen a few myself, but they were on lower option trucks without the lower moldings.

Thanks for the info!
Ray

2500HD · 05-31-2012, 04:29 PM

my mostly original paint 70 has both.

SS Tim · 05-31-2012, 04:34 PM

Here is another picture that shows the factory stripe to good effect. Are the specs for this in anyone's assembly manual? Mine is currently hiding from me to check.

Ozark Tim · 05-31-2012, 05:45 PM

Yes you could get both as pictured by someone else.
Here is mine, no lower molding but factory painted pin stripes.

**72 Super** · 05-31-2012, 05:46 PM

Quote:

Originally Posted by 2500HD

my mostly original paint 70 has both.

2500HD That is a sweet truck with factory paint, very nice.

Ray

Steve Hafner · 05-31-2012, 07:36 PM

. . . .

Here's a pinstripe on a pretty original 71 and a 70's SPID.

. . . .

SS Tim · 05-31-2012, 07:51 PM

That sure looks like the other side of Ozark Tim's truck! Does anyone have a good picture of the lettering?

**72 Super** · 05-31-2012, 08:03 PM

Quote:

Originally Posted by SS Tim

That sure looks like the other side of Ozark Tim's truck! Does anyone have a good picture of the lettering?

I was thinking the same too myself before I saw your post

sameyrasmea72 · 05-31-2012, 08:18 PM

This truck had original paint, but we added the lower trim.

SS Tim · 05-31-2012, 08:29 PM

Quote:

Originally Posted by sameyrasmea72

This truck had original paint, but we added the lower trim.

Well done! It nicely ties the two tone paint.

BLAZERMAN · 05-31-2012, 11:25 PM

Yep, my 68 has the factory stripe with lower moulding.

**special-K** · 06-01-2012, 06:48 AM

I had a '69 K/10 CST Custom Camper in Maroon Poly w/Silver pinstripe and Red bucket seat interior. So,that was one from factory with pinstripe and lower trim.

SS Tim · 06-02-2012, 10:00 PM

Found a factory picture of a nice looking truck.

**70cst** · 06-02-2012, 10:10 PM

Thanks for the pics of the Pin Striping. Something I didn't realize

factorystock · 06-02-2012, 11:48 PM

Depending on exterior color, pinstripe could be black also.

House13 · 06-03-2012, 01:44 AM

Here is the SPID from my old '70 with Paint Stripe upper and wide lower molding...

stomper · 06-05-2012, 12:39 AM

Remembered this thread when i saw this truck

http://seattle.craigslist.org/see/cto/3019545996.html
Posted via Mobile Device

stomper · 06-05-2012, 02:34 PM

A pic from ad in previous post...

05-31-2012, 07:44 AM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,681	Factory pinstripe/ w lower moldings?? Was the factory pinstripe available on a truck with lower moldings? Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-31-2012, 12:15 PM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Factory pinstripe/ w lower moldings?? The D96 paint stripe was available with a few exclusions but could be had with lower body moldings ('72 shown). Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

05-31-2012, 12:23 PM	#4
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Factory pinstripe/ w lower moldings?? I was going to say yes, and that mu buddy Joesjunk has one, but ss tim already posted a pic of it. Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

05-31-2012, 04:29 PM	#6
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	Re: Factory pinstripe/ w lower moldings?? my mostly original paint 70 has both. Attached Images __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

05-31-2012, 04:34 PM	#7
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Factory pinstripe/ w lower moldings?? Here is another picture that shows the factory stripe to good effect. Are the specs for this in anyone's assembly manual? Mine is currently hiding from me to check. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

05-31-2012, 05:45 PM	#8
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Factory pinstripe/ w lower moldings?? Yes you could get both as pictured by someone else. Here is mine, no lower molding but factory painted pin stripes. Attached Images

05-31-2012, 07:36 PM	#10
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Factory pinstripe/ w lower moldings?? . . . . Here's a pinstripe on a pretty original 71 and a 70's SPID. . . . . Attached Images

05-31-2012, 07:51 PM	#11
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Factory pinstripe/ w lower moldings?? That sure looks like the other side of Ozark Tim's truck! Does anyone have a good picture of the lettering? __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

05-31-2012, 08:18 PM	#13
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: Factory pinstripe/ w lower moldings?? This truck had original paint, but we added the lower trim. Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

05-31-2012, 11:25 PM	#15
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: Factory pinstripe/ w lower moldings?? Yep, my 68 has the factory stripe with lower moulding. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

06-01-2012, 06:48 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Factory pinstripe/ w lower moldings?? I had a '69 K/10 CST Custom Camper in Maroon Poly w/Silver pinstripe and Red bucket seat interior. So,that was one from factory with pinstripe and lower trim. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-02-2012, 10:00 PM	#17
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Factory pinstripe/ w lower moldings?? Found a factory picture of a nice looking truck. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

06-02-2012, 10:10 PM	#18
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Factory pinstripe/ w lower moldings?? Thanks for the pics of the Pin Striping. Something I didn't realize __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-02-2012, 11:48 PM	#19
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,361	Re: Factory pinstripe/ w lower moldings?? Depending on exterior color, pinstripe could be black also. Attached Images

06-03-2012, 01:44 AM	#20
House13 Registered User Join Date: Jan 2008 Location: The REAL Nor-Cal Posts: 68	Re: Factory pinstripe/ w lower moldings?? Here is the SPID from my old '70 with Paint Stripe upper and wide lower molding... Attached Images



Register or Log In To remove these advertisements.

06-05-2012, 12:39 AM	#21
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	Re: Factory pinstripe/ w lower moldings?? Remembered this thread when i saw this truck http://seattle.craigslist.org/see/cto/3019545996.html Posted via Mobile Device __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

06-05-2012, 02:34 PM	#22
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	Re: Factory pinstripe/ w lower moldings?? A pic from ad in previous post... Attached Images __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

Register or Log In To remove these advertisements.