NJ FS: 72 350 4 bolt main bare block cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 05-31-2012, 11:09 AM

I have a bare 350 4 bolt main block I removed from a 72 Cheyenne pickup a couple of years ago. Also comes with original crankshaft.
First $100 takes it. Sorry NO shipping.

Any questions pls LMK.

Thanks
Scott

**ScottH** · 06-06-2012, 09:58 AM

ttt

**ScottH** · 06-15-2012, 02:18 PM

also have a balanced rotating assembly available, stock pistons, recond rods
Asking $150 or $200 with block

**CC69Rat** · 06-15-2012, 03:42 PM

3970010 casting ? Steel crank?

**ScottH** · 06-15-2012, 03:56 PM

I doubt its a steel crank, but will check the numbers on both and post what I find.

**ScottH** · 12-06-2012, 12:50 PM

still available

1972SUPERSB · 12-06-2012, 11:14 PM

Quote:

Originally Posted by CC69Rat

3970010 casting ? Steel crank?

Not to hijack but my block says 3970010. Is this a 72 engine?
Posted via Mobile Device

**ScottH** · 12-06-2012, 11:22 PM

Will confirm casting # tomorrow, and yes I pulled this from a 72 Cheyenne.

blkcorvair · 12-08-2012, 06:21 PM

Any pictures?

**ScottH** · 12-08-2012, 06:51 PM

I'll try to take some pics and get the casting number tomorrow.

**ScottH** · 01-22-2013, 10:46 AM

still available

**ScottH** · 02-07-2013, 11:31 AM

ttt

**ScottH** · 02-11-2013, 03:17 PM

Here r some pics of the rotating assembly:

70blackfish · 02-11-2013, 03:40 PM

good deal.. wish it was closer to the left coast......

**ScottH** · 02-16-2013, 02:00 AM

Will sell the balanced rotating assembly for $150 including a set of TRW rings and bearings I've had since the 70's. Will ship

Scott

**special-K** · 02-16-2013, 10:46 AM

Do you still have the block'too?

**ScottH** · 02-16-2013, 10:48 AM

Yupper, asking $100 for the block by itself or add $50 to the other parts listed above and its included.

Scott

**ScottH** · 02-19-2013, 10:44 AM

ttt

**ScottH** · 02-20-2013, 02:29 PM

ttt

**ScottH** · 02-22-2013, 11:48 AM

ttt

**ScottH** · 02-27-2013, 10:40 AM

ttt

**ScottH** · 03-04-2013, 10:49 AM

No one interested for $200 for everything??

German_AC · 03-04-2013, 12:03 PM

Quote:

Originally Posted by ScottH

No one interested for $200 for everything??

Will you ship it to 33126? How much the shipping will be?

Can you put the parts in a wooden box?

Thanks!

**ScottH** · 03-04-2013, 12:08 PM

I think it would be too heavy, the shipping costs would be very expensive.

**CC69Rat** · 03-04-2013, 12:27 PM

just for general FYI, 3970010 is a high nickel block. They're pretty bomb proof and a great foundation for a stout little 350. 4 bolt mains, etc. It definitely increases the value if this one is an '0010' block.

05-31-2012, 11:09 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	FS: 72 350 4 bolt main bare block cheap I have a bare 350 4 bolt main block I removed from a 72 Cheyenne pickup a couple of years ago. Also comes with original crankshaft. First $100 takes it. Sorry NO shipping. Any questions pls LMK. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-06-2012, 09:58 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-15-2012, 02:18 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap also have a balanced rotating assembly available, stock pistons, recond rods Asking $150 or $200 with block __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-15-2012, 03:42 PM	#4
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: FS: 72 350 4 bolt main bare block cheap 3970010 casting ? Steel crank? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-15-2012, 03:56 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap I doubt its a steel crank, but will check the numbers on both and post what I find. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-06-2012, 12:50 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap still available __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-06-2012, 11:22 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Will confirm casting # tomorrow, and yes I pulled this from a 72 Cheyenne. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-08-2012, 06:21 PM	#9
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: FS: 72 350 4 bolt main bare block cheap Any pictures?

12-08-2012, 06:51 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap I'll try to take some pics and get the casting number tomorrow. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-22-2013, 10:46 AM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap still available __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-07-2013, 11:31 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-11-2013, 03:17 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Here r some pics of the rotating assembly: Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-11-2013, 03:40 PM	#14
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: FS: 72 350 4 bolt main bare block cheap good deal.. wish it was closer to the left coast...... __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

02-16-2013, 02:00 AM	#15
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Will sell the balanced rotating assembly for $150 including a set of TRW rings and bearings I've had since the 70's. Will ship Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-16-2013, 10:46 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: FS: 72 350 4 bolt main bare block cheap Do you still have the block'too? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

02-16-2013, 10:48 AM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Yupper, asking $100 for the block by itself or add $50 to the other parts listed above and its included. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-19-2013, 10:44 AM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-20-2013, 02:29 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-22-2013, 11:48 AM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-27-2013, 10:40 AM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-04-2013, 10:49 AM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap No one interested for $200 for everything?? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-04-2013, 12:08 PM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap I think it would be too heavy, the shipping costs would be very expensive. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-04-2013, 12:27 PM	#25
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: FS: 72 350 4 bolt main bare block cheap just for general FYI, 3970010 is a high nickel block. They're pretty bomb proof and a great foundation for a stout little 350. 4 bolt mains, etc. It definitely increases the value if this one is an '0010' block. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Register or Log In To remove these advertisements.