WY Unmolested factory tach. harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 06-22-2012, 10:28 PM

Very clean factory tach. harness, This is one of the few I've seen that still have the correct coil wire end. Plugs are excellent as well as firewall rubber. $65 shipped. Thanks, Sharpie SOLD

**Already Gone** · 06-22-2012, 10:40 PM

I'll pay 50.00 shipped and give you a USA address for shipping.

*sharpie1972* · 06-22-2012, 10:42 PM

Quote:

Originally Posted by Already Gone

I'll pay 50.00 shipped and give you a USA address for shipping.

Sorry, price is firm on this. Thanks, Sharpie

**Already Gone** · 06-22-2012, 10:44 PM

Quote:

Originally Posted by sharpie1972

Sorry, price is firm on this. Thanks, Sharpie

10-4.,. If you dont get your price and decide to let it go for less please give me first dibs.

**WIDESIDE72** · 06-23-2012, 09:17 AM

That's a nice one, but as I plan to run HEI, it would be a crime to clip the coil connectors off!
Posted via Mobile Device

*sharpie1972* · 06-24-2012, 12:09 AM

Quote:

Originally Posted by WIDESIDE72

That's a nice one, but as I plan to run HEI, it would be a crime to clip the coil connectors off!
Posted via Mobile Device

X2. Hopefully goes to someone going for 100% correct. Sharpie

**WIDESIDE72** · 06-26-2012, 06:52 PM

I don't know what you are talking about! Haha

I tried to make a post but the phone went hinky on me. I was trying to say I was thinking of running a pertronix and using this harness you have...

*sharpie1972* · 06-26-2012, 11:58 PM

Quote:

Originally Posted by WIDESIDE72

Posted via Mobile Device

The Invisible Message strikes again! Sharpie

67chevy1series · 06-27-2012, 02:48 AM

Hey Dennis, would you happen to have a picture of the location of the tach wiring hole in the fire wall on a 67??
Posted via Mobile Device

**WIDESIDE72** · 06-27-2012, 11:28 AM

Dennis, after much deliberation, if you could provide me with custom installation instructions like you did fr the dome light door harnesses, the most can offer you is $65 shipped, but that is my final offer!

PT'S 70 CST · 06-27-2012, 11:37 AM

This may help you guys. Here are two different ones. the first one is a '67-'68 six cyl and i think one of the cables shown is for a cable driven tach. The second one is '71 six & V-8

PT

**WIDESIDE72** · 06-27-2012, 11:42 AM

This is good, but in order for my offer to be valid. It needs to be a sharpie original, signed if possible!

Just kidding! Pm me your Paypal address to ensure I don't pay the wrong person when going by memory ( don't ask!)
Posted via Mobile Device

PT'S 70 CST · 06-27-2012, 11:44 AM

Ok I will delete these pics

.

PT

*sharpie1972* · 06-27-2012, 11:22 PM

Quote:

Originally Posted by WIDESIDE72

Dennis, after much deliberation, if you could provide me with custom installation instructions like you did fr the dome light door harnesses, the most can offer you is $65 shipped, but that is my final offer!

Thank you for your full price offer! I will gladly include a template of the firewall hole. Sharpie

**WIDESIDE72** · 06-28-2012, 07:33 AM

Quote:

Originally Posted by PT'S 70 CST

Ok I will delete these pics

.

PT

Oh no we gotta have those too! Thanks, btw.
Posted via Mobile Device

**WIDESIDE72** · 06-28-2012, 07:44 AM

Payment sent
Posted via Mobile Device

06-22-2012, 10:28 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Unmolested factory tach. harness Very clean factory tach. harness, This is one of the few I've seen that still have the correct coil wire end. Plugs are excellent as well as firewall rubber. $65 shipped. Thanks, Sharpie SOLD Attached Images Last edited by sharpie1972; 06-28-2012 at 08:48 AM.

06-22-2012, 10:40 PM	#2
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Unmolested factory tach. harness I'll pay 50.00 shipped and give you a USA address for shipping. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

06-23-2012, 09:17 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Unmolested factory tach. harness That's a nice one, but as I plan to run HEI, it would be a crime to clip the coil connectors off! Posted via Mobile Device

06-26-2012, 06:52 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Unmolested factory tach. harness I don't know what you are talking about! Haha I tried to make a post but the phone went hinky on me. I was trying to say I was thinking of running a pertronix and using this harness you have... Last edited by WIDESIDE72; 06-27-2012 at 11:24 AM.

06-27-2012, 02:48 AM	#9
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Unmolested factory tach. harness Hey Dennis, would you happen to have a picture of the location of the tach wiring hole in the fire wall on a 67?? Posted via Mobile Device

06-27-2012, 11:28 AM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Unmolested factory tach. harness Dennis, after much deliberation, if you could provide me with custom installation instructions like you did fr the dome light door harnesses, the most can offer you is $65 shipped, but that is my final offer!

06-27-2012, 11:37 AM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Unmolested factory tach. harness This may help you guys. Here are two different ones. the first one is a '67-'68 six cyl and i think one of the cables shown is for a cable driven tach. The second one is '71 six & V-8 PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-27-2012, 11:42 AM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Unmolested factory tach. harness This is good, but in order for my offer to be valid. It needs to be a sharpie original, signed if possible! Just kidding! Pm me your Paypal address to ensure I don't pay the wrong person when going by memory ( don't ask!) Posted via Mobile Device

06-27-2012, 11:44 AM	#13
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Unmolested factory tach. harness Ok I will delete these pics . PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-28-2012, 07:44 AM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Unmolested factory tach. harness Payment sent Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.