![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2000
Location: Zillah Wa. USA
Posts: 394
|
Ford 9 inch into a 69 C-10
My rear axle is shot. Anybody do the Ford 9"? How about a later model GM unit for my 69 SWB? It has coils. Thanks
__________________
'69 SWB '76 International "Terra" "Hooked on holiday beer" |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
|
Im in the process of doing this right now, just need to find out the pinnion angle to set the rear to.
__________________
70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2000
Location: Zillah Wa. USA
Posts: 394
|
What is the rear end out of? Keep us informed. Thanks
__________________
'69 SWB '76 International "Terra" "Hooked on holiday beer" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
|
I bought it at a swapmeet but i believe its from a 78-79 lincoln with rear disks and 5on5" bolt patern the same as our trucks.
I believe its 1" wider than stock 1/2" on each side, ( thats from memory though) still fits really good. I just finished up the rear today need to borrow a camera to take some pics.
__________________
70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2001
Location: Virginia Beach, Va, USA
Posts: 1,676
|
Ford nine inch
I have one out of a 79 lincoln in mine. Haven't hooked up the brakes or lines yet. Wootdog
__________________
1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2002
Location: Tennessee, Morristown
Posts: 355
|
I have one out of a 70' ford truck. My rearend is not offset at all. But it is a little shorter than the one in my truck.
__________________
1967 Chevy truck, R1 racing seats, 4 point racing harness, 4/6 drop, primered blue, soon to be shaved, 350- 060. over, flat top pistons, Eagle rods, Edelbrock Aluminum heads, 1.5 Scorpion roller rockers, Lunati 515" cam, mallory ignition, Holley 750 double pumper carb, Built 350 turbo trans, 2500-2800 boss hog stall, 20 gallon aluminum fuel cell!!! |
![]() |
![]() |
![]() |
Bookmarks |
|
|