TX Restored auto tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72highlander · 06-27-2012, 05:14 PM

Completely restored auto tilt. Green in color to match olive interiors. Restored by cheyenne super man in abilene. I know he does make some out of van tilts and i'm not a guru so i'm gonna say this is a van tilt so there's no hurt feelings. I tried to take pics at all angles so anyone that knows the difference is welcome to chime in. It's new end to end and has a short shift lever. I'm going a different direction on some projects and not gonna use this. I'm pricing this a good bit less than I gave and what he charges so take that into consideration on offers.

$450 plus shipping

**leddzepp** · 06-27-2012, 06:11 PM

It was a van tilt....you can see where the neutral safety switch was originally located higher up on the column. But that is still a great deal for a brand new column, and in a factory matched color to boot

72highlander · 06-28-2012, 06:33 PM

Quote:

Originally Posted by leddzepp

It was a van tilt....you can see where the neutral safety switch was originally located higher up on the column. But that is still a great deal for a brand new column, and in a factory matched color to boot

Thanks, color may limit market but it's a very nice piece.
Posted via Mobile Device

shawno72 · 06-28-2012, 06:43 PM

That's a very nice piece for sure.

72highlander · 07-01-2012, 06:14 PM

Ttt
Posted via Mobile Device

dmw319 · 07-05-2012, 11:01 PM

So it'd fit a 67-72 truck with no problem?
Posted via Mobile Device

Chevy072 · 07-05-2012, 11:15 PM

Quote:

Originally Posted by dmw319

So it'd fit a 67-72 truck with no problem?
Posted via Mobile Device

Yes it would. The wiring,shaft and neutral safety switch is now correct for fitment in 67-72 trucks

72highlander · 07-05-2012, 11:24 PM

Quote:

Originally Posted by dmw319

So it'd fit a 67-72 truck with no problem?
Posted via Mobile Device

Yes, bolt in install just like a truck tilt.
Posted via Mobile Device

72highlander · 09-13-2012, 12:54 PM

Ttt
Posted via Mobile Device

mahanian · 09-13-2012, 01:01 PM

that thing is purdy!!

mahanian · 09-13-2012, 01:04 PM

Just a side note, that column has the shorter van shift lever too

72highlander · 09-15-2012, 11:02 AM

Also have a comfortgrip wheel with dyed grip and matching hub I'd consider selling with it if it would push deal over the top.
Posted via Mobile Device

gotchamel · 09-16-2012, 10:42 AM

Does the shift indicator pointer line up properly with the gear?Is there a light in the indicator?Is it painted or powder coated?Thanks.

**lolife99** · 09-16-2012, 11:47 AM

Quote:

Originally Posted by 72highlander

Also have a comfortgrip wheel with dyed grip and matching hub I'd consider selling with it if it would push deal over the top.
Posted via Mobile Device

How much for just the steering wheel and hub?

72highlander · 09-16-2012, 04:34 PM

Quote:

Originally Posted by gotchamel

Does the shift indicator pointer line up properly with the gear?Is there a light in the indicator?Is it painted or powder coated?Thanks.

Yes, lines up as it should, has light that lights up indicator. It is painted.
Posted via Mobile Device

72highlander · 09-16-2012, 04:35 PM

Quote:

Originally Posted by lolife99

How much for just the steering wheel and hub?

I would, they are dyed olive though. It is a brand new repro wheel with hub and horn button.
Posted via Mobile Device

**lolife99** · 09-16-2012, 04:52 PM

Quote:

Originally Posted by 72highlander

I would, they are dyed olive though. It is a brand new repro wheel with hub and horn button.
Posted via Mobile Device

How much?

gotchamel · 09-16-2012, 04:55 PM

Quote:

Originally Posted by 72highlander

Yes, lines up as it should, has light that lights up indicator. It is painted.
Posted via Mobile Device

Thanks for getting back,no for now.

72highlander · 09-16-2012, 06:58 PM

Quote:

Originally Posted by lolife99

How much?

Here's a link to the actual wheel

http://67-72chevytrucks.com/vboard/s...d.php?t=423711

I'd take $200 plus actual shipping
Posted via Mobile Device

missinfishin10 · 09-16-2012, 07:55 PM

I really, really, really, really, want that column. But, shes still not over me getting the bucket seats and console last month... put it away. get it back out in a month or so. OK? lol. Good luck with the sale!

**lolife99** · 09-17-2012, 10:48 AM

Quote:

Originally Posted by 72highlander

Here's a link to the actual wheel

http://67-72chevytrucks.com/vboard/s...d.php?t=423711

I'd take $200 plus actual shipping
Posted via Mobile Device

Thanks for posting.
I will pass.

72highlander · 09-17-2012, 06:40 PM

Quote:

Originally Posted by missinfishin10

I really, really, really, really, want that column. But, shes still not over me getting the bucket seats and console last month... put it away. get it back out in a month or so. OK? lol. Good luck with the sale!

I'll do an easy payment plan!!

missinfishin10 · 09-17-2012, 07:17 PM

pm coming...

missinfishin10 · 09-17-2012, 07:49 PM

Deposit sent!

Thanks Frank!

Jeff

72highlander · 09-17-2012, 10:32 PM

Sold to Jeff, thanks!
Posted via Mobile Device

06-27-2012, 05:14 PM	#1
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Restored auto tilt Completely restored auto tilt. Green in color to match olive interiors. Restored by cheyenne super man in abilene. I know he does make some out of van tilts and i'm not a guru so i'm gonna say this is a van tilt so there's no hurt feelings. I tried to take pics at all angles so anyone that knows the difference is welcome to chime in. It's new end to end and has a short shift lever. I'm going a different direction on some projects and not gonna use this. I'm pricing this a good bit less than I gave and what he charges so take that into consideration on offers. $450 plus shipping Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

06-27-2012, 06:11 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: Restored auto tilt It was a van tilt....you can see where the neutral safety switch was originally located higher up on the column. But that is still a great deal for a brand new column, and in a factory matched color to boot __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

06-28-2012, 06:43 PM	#4
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Restored auto tilt That's a very nice piece for sure. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

07-01-2012, 06:14 PM	#5
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Restored auto tilt Ttt Posted via Mobile Device __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-05-2012, 11:01 PM	#6
dmw319 Registered User Join Date: May 2012 Location: Raleigh, NC Posts: 639	Re: Restored auto tilt So it'd fit a 67-72 truck with no problem? Posted via Mobile Device __________________ 1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167

09-13-2012, 12:54 PM	#9
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Restored auto tilt Ttt Posted via Mobile Device __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

09-13-2012, 01:01 PM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Restored auto tilt that thing is purdy!! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

09-13-2012, 01:04 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Restored auto tilt Just a side note, that column has the shorter van shift lever too __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

09-15-2012, 11:02 AM	#12
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Restored auto tilt Also have a comfortgrip wheel with dyed grip and matching hub I'd consider selling with it if it would push deal over the top. Posted via Mobile Device __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

09-16-2012, 10:42 AM	#13
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Restored auto tilt Does the shift indicator pointer line up properly with the gear?Is there a light in the indicator?Is it painted or powder coated?Thanks.

09-16-2012, 07:55 PM	#20
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Restored auto tilt I really, really, really, really, want that column. But, shes still not over me getting the bucket seats and console last month... put it away. get it back out in a month or so. OK? lol. Good luck with the sale! __________________ 71 LWB Fleetside 1950 3100 Original Project!

09-17-2012, 07:17 PM	#23
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Restored auto tilt pm coming... __________________ 71 LWB Fleetside 1950 3100 Original Project!

09-17-2012, 07:49 PM	#24
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Restored auto tilt Deposit sent! Thanks Frank! Jeff __________________ 71 LWB Fleetside 1950 3100 Original Project!

09-17-2012, 10:32 PM	#25
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Restored auto tilt Sold to Jeff, thanks! Posted via Mobile Device __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.