Glove Box liner screws

[72 Super]

I need a picture of the original screws used to install the inner glove liner. My truck has been apart for a while and I trying to piece everything back together to see what I have and what I am missing.

Thanks in advance,
Ray
Posted via Mobile Device

[ole dollor]

dont have a pic...but they are big headed phillips, the clips should show you the size, or you could find some and use a washer....to hold the glove box...washer would give more area covered to hold better if you cant locate the large headed screws....

[Daddy'O]

Here is what we used on my son's truck -

From classic parts:

http://www.classicparts.com/1967-72-...ctinfo/22-111/

[72 Super]

Olel Dollor, It is coming back to me now. I have the 4 on the Glove box door hinge, I will have to round up the others.
Thanks,
Ray
Posted via Mobile Device

[ole dollor]

dadd'o....has a good link that shows them.....

[LockDoc]

-
I don't have a picture on the computer but they are a #6 sheet metal type screw about 3/4" long with a non-removable washer.

LockDoc

[72 Super]

Originally Posted by ole dollor

dadd'o....has a good link that shows them.....

I just checked the link, I have a few, but haven't came up with the rest I thought I had everything together, but I see I am finding out different lol.

Thanks guys!
Ray

[LockDoc]

Originally Posted by 72 Super

I just checked the link, I have a few, but haven't came up with the rest I thought I had everything together, but I see I am finding out different lol.

Thanks guys!
Ray

Hey Ray,

If you need some let me know and I will send them to you. I have quite a few of them.

LockDoc

[Already Gone]

I needed some a few months back and went to the wrecker and took them from a junker. Whenever I'm taking something apart and there are multiple srcews with different amounts and sizes I ( if it can be done ) screw the srew back into where it came out of so on reassembly ( which might be 3 months later ) I know where they go.

[72 Super]

Originally Posted by LockDoc

Hey Ray,

If you need some let me know and I will send them to you. I have quite a few of them.

LockDoc

Hi Leon,

Thanks for the offer and I will get back with you if I can't locate the remaining screws. I know I have the Glove box hinge ones taped to it, so I should have the others somewhere.

Thanks again,
Ray

[72 Super]

Originally Posted by Already Gone

I needed some a few months back and went to the wrecker and took them from a junker. Whenever I'm taking something apart and there are multiple srcews with different amounts and sizes I ( if it can be done ) screw the srew back into where it came out of so on reassembly ( which might be 3 months later ) I know where they go.

I try and do the samething too. I am just going through everything right now to see what I have and what I am missing. I actually forgot what they looked like until I posted here.

Thanks,
Ray