WY Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 07-08-2012, 01:59 PM

Tough to find original paint drivers side fender. This will fit 1968 Chevy and 68-72 GMC. Needs a small repair on lower corner door side, has a small dent on top edge, and is showing a few small bubbles in cup. Eyebrow edge and all mounting points are excellent. Overall probably less work than getting a repop to fit and you end up with genuine GM metal! $250 shipped via Greyhound. Thanks, Sharpie

*sharpie1972* · 07-08-2012, 01:59 PM

....

**special-K** · 07-08-2012, 02:06 PM

Come on now. Don't you remember you already sold me that prime original paint bronze & white driver side fender? Don't give me that crap,you know,from the Jimmy. Now you're supposed to find me a passenger side that nice,not another driver side. Doggone it!

*sharpie1972* · 07-08-2012, 02:34 PM

Quote:

Originally Posted by special-K

Come on now. Don't you remember you already sold me that prime original paint bronze & white driver side fender? Don't give me that crap,you know,from the Jimmy. Now you're supposed to find me a passenger side that nice,not another driver side. Doggone it!

I had the matching passenger side from the Jimmy for you way back when. I could have crated them together, but would have needed a forklift to load! Sharpie

**special-K** · 07-08-2012, 04:03 PM

I snoozed and losed. I do have a rust-free right fender in original paint,but not exactly dent-free. I guess it'll do. Good luck on this one. I'm going to stop messing up your thread now.

*sharpie1972* · 07-11-2012, 08:49 PM

Quote:

Originally Posted by special-K

I snoozed and losed. I do have a rust-free right fender in original paint,but not exactly dent-free. I guess it'll do. Good luck on this one. I'm going to stop messing up your thread now.

Hey Tim, you never mess up a thread.... just add a little MD spice! Sharpie

**special-K** · 07-13-2012, 08:25 AM

Quote:

Originally Posted by sharpie1972

Hey Tim, you never mess up a thread.... just add a little MD spice! Sharpie

A little of this?

*sharpie1972* · 07-13-2012, 08:48 AM

Hey Tim, you sure do have alot of cupcake sprinkles????? Sharpie

**Tim Christian** · 07-13-2012, 09:36 AM

That Tim is a CUPCAKE!!!! LOL!!!!

*sharpie1972* · 07-13-2012, 10:15 AM

Quote:

Originally Posted by Tim Christian

That Tim is a CUPCAKE!!!! LOL!!!!

I was wondering what his knickname was!!!!!! Sharpie

07-08-2012, 01:59 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! Tough to find original paint drivers side fender. This will fit 1968 Chevy and 68-72 GMC. Needs a small repair on lower corner door side, has a small dent on top edge, and is showing a few small bubbles in cup. Eyebrow edge and all mounting points are excellent. Overall probably less work than getting a repop to fit and you end up with genuine GM metal! $250 shipped via Greyhound. Thanks, Sharpie Attached Images

07-08-2012, 01:59 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! .... Attached Images

07-08-2012, 02:06 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! Come on now. Don't you remember you already sold me that prime original paint bronze & white driver side fender? Don't give me that crap,you know,from the Jimmy. Now you're supposed to find me a passenger side that nice,not another driver side. Doggone it! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-08-2012, 04:03 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! I snoozed and losed. I do have a rust-free right fender in original paint,but not exactly dent-free. I guess it'll do. Good luck on this one. I'm going to stop messing up your thread now. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-13-2012, 08:48 AM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! Hey Tim, you sure do have alot of cupcake sprinkles????? Sharpie

07-13-2012, 09:36 AM	#9
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Drivers side fender 1968 Chevy & 68-72 GMC. Original paint! That Tim is a CUPCAKE!!!! LOL!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.