FL TH400, Pulleys,fan, roch. carb, Accel distributor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy072 · 07-11-2012, 10:27 AM

TH400 transmission in fine working order with torque convertor. $225. Prefer pickup,but will ship if needed.

Fan pulley #3927796 4E-$20 shipped
Crank pulley-( will get the number later)$25 shipped
Fan with spacer-$30 shipped

Rochester carb-# 7041202 DG- linkage is broken here and there. Worked fine,but leaked a little and will need work. $30 shipped SOLD[/COLOR]
ACCEL distributor- OEM replacement used for put on 6 months ago,but only used for 4 months on the weekends. $75 shipped SOLD

jjtackleberry · 07-11-2012, 11:19 PM

Can I get more pics of the carb, and why are you selling the distributor?

Thanks

Chevy072 · 07-11-2012, 11:47 PM

Quote:

Originally Posted by jjtackleberry

Can I get more pics of the carb, and why are you selling the distributor?

Thanks

I will get more pics of the carb in the morning. The engine this distributor was on threw a rod.

Chevy072 · 07-13-2012, 07:46 PM

any interest?

**kev2809** · 07-13-2012, 10:29 PM

would you sell the transmission line?

Chevy072 · 07-14-2012, 09:22 AM

Quote:

Originally Posted by jjtackleberry

Can I get more pics of the carb, and why are you selling the distributor?

Thanks

Here are some more pictures of the carb. for you. I just pulled this off a running motor on monday afternoon after i noticed it dripping a small amount of fuel out of the passenger side linkage screw.

Chevy072 · 07-14-2012, 09:23 AM

Quote:

Originally Posted by kev2809

would you sell the transmission line?

Possibly. Which ones are you after?

Leroy-B1 · 07-14-2012, 09:32 AM

do you have yoke for tranny and does it have all the kickdown stuff?

Chevy072 · 07-14-2012, 09:37 AM

Quote:

Originally Posted by Leroy-B1

do you have yoke for tranny and does it have all the kickdown stuff?

I do have the yoke. The kickdown harness went with the cab,but I most likely can get it back because the buyer isn't going to use it.

**kev2809** · 07-14-2012, 02:40 PM

i need the bottom one in the pic i posted..

Chevy072 · 07-18-2012, 09:49 AM

Anyone? $250 for the TH400?

Chevy072 · 07-21-2012, 04:39 PM

ttt

Chevy072 · 07-23-2012, 07:32 PM

ttt

Chevy072 · 07-29-2012, 10:09 AM

ttt

205dke187 · 07-29-2012, 11:48 AM

How far are you from Montgomery, Alabama? Might be interested in the trans

Chevy072 · 07-29-2012, 11:50 AM

Quote:

Originally Posted by 205dke187

How far are you from Montgomery, Alabama? Might be interested in the trans

Googlemaps says 435miles. I have an autmatic floor shifter (new) and a auto crossmember available as well.

HeavyMetalChevy · 07-29-2012, 12:27 PM

I will take the carb and distributor.. pm me for details.. maybe combine shipping? Thanks

Chevy072 · 07-29-2012, 12:30 PM

Quote:

Originally Posted by HeavyMetalChevy

I will take the carb and distributor.. pm me for details.. maybe combine shipping? Thanks

Pm on the way

**kev2809** · 07-30-2012, 06:58 PM

did you ever get a chance to check on the trans line?

Chevy072 · 07-30-2012, 08:07 PM

Quote:

Originally Posted by kev2809

did you ever get a chance to check on the trans line?

I have it,but it might be cheaper for you to get a new one.I am going to fedex tomorrow and i can wrap it up for you and get a price from them. Sorry i let this thread fall to the back burner for a little while

Chevy072 · 08-03-2012, 04:00 PM

offers?

HeavyMetalChevy · 08-03-2012, 07:08 PM

Recieved Dizzy and it is like brand new. Good deal..Thanks

Chevy072 · 08-03-2012, 09:33 PM

Quote:

Originally Posted by HeavyMetalChevy

Recieved Dizzy and it is like brand new. Good deal..Thanks

The distributor was only six months old and only used on weekends for 3 of those months. The carb. worked fine,but it dripped fuel out of the passenger side bottom linkage screw(just so you know where the problem was) Thanks again

Chevy072 · 08-07-2012, 08:35 PM

anyone need this transmission? Make me an offer

dropanddrag71 · 08-09-2012, 08:02 AM

I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350, is that a 3 grrove crank pulley for my 350?

07-11-2012, 10:27 AM	#1
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	TH400, Pulleys,fan, roch. carb, Accel distributor TH400 transmission in fine working order with torque convertor. $225. Prefer pickup,but will ship if needed. Fan pulley #3927796 4E-$20 shipped Crank pulley-( will get the number later)$25 shipped Fan with spacer-$30 shipped Rochester carb-# 7041202 DG- linkage is broken here and there. Worked fine,but leaked a little and will need work. $30 shipped SOLD[/COLOR] ACCEL distributor- OEM replacement used for put on 6 months ago,but only used for 4 months on the weekends. $75 shipped SOLD Attached Images Last edited by Chevy072; 09-01-2012 at 09:33 AM.

07-11-2012, 11:19 PM	#2
jjtackleberry Registered User Join Date: Feb 2011 Location: kansas Posts: 306	Re: TH400, Pulleys,fan, roch. carb, Accel distributor Can I get more pics of the carb, and why are you selling the distributor? Thanks __________________ '71 Chevy LWB all OG '86 Chevy LWB all OG It's all a matter of perception

07-13-2012, 07:46 PM	#4
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor any interest?

07-13-2012, 10:29 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: TH400, Pulleys,fan, roch. carb, Accel distributor would you sell the transmission line? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-14-2012, 09:32 AM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: TH400, Pulleys,fan, roch. carb, Accel distributor do you have yoke for tranny and does it have all the kickdown stuff?

07-14-2012, 02:40 PM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: TH400, Pulleys,fan, roch. carb, Accel distributor i need the bottom one in the pic i posted.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-18-2012, 09:49 AM	#11
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor Anyone? $250 for the TH400?

07-21-2012, 04:39 PM	#12
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor ttt

07-23-2012, 07:32 PM	#13
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor ttt

07-29-2012, 10:09 AM	#14
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor ttt

07-29-2012, 11:48 AM	#15
205dke187 Registered User Join Date: Sep 2011 Location: clanton, Alabama Posts: 32	Re: TH400, Pulleys,fan, roch. carb, Accel distributor How far are you from Montgomery, Alabama? Might be interested in the trans

07-29-2012, 12:27 PM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: TH400, Pulleys,fan, roch. carb, Accel distributor I will take the carb and distributor.. pm me for details.. maybe combine shipping? Thanks __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

07-30-2012, 06:58 PM	#19
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: TH400, Pulleys,fan, roch. carb, Accel distributor did you ever get a chance to check on the trans line? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-03-2012, 04:00 PM	#21
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor offers?

08-03-2012, 07:08 PM	#22
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: TH400, Pulleys,fan, roch. carb, Accel distributor Recieved Dizzy and it is like brand new. Good deal..Thanks __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

08-07-2012, 08:35 PM	#24
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: TH400, Pulleys,fan, roch. carb, Accel distributor anyone need this transmission? Make me an offer

08-09-2012, 08:02 AM	#25
dropanddrag71 Registered User Join Date: Jul 2012 Location: Central florida Posts: 178	Re: TH400, Pulleys,fan, roch. carb, Accel distributor I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350, is that a 3 grrove crank pulley for my 350? __________________ " You are only coming threw in waves,... Your lips move, but i can't hear what your saying"

Register or Log In To remove these advertisements.