SPID reprints? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70K10Hunter · 07-13-2012, 09:05 PM

Hi new to the site and am getting ready to rebuild my 70 K10. I found out that I am the second owner of this truck. the PO had a rollbar welded in the cab, I cut it out and while doing so noticed that they cut the corner of the glove box door to clear the rollbar. got a new to me glove box door and was wondering if anybody out there that reprints the SPID sheet on the door. I have to paint the box door and dont want to lose the spec sheet info.
Thanks in advance

67c10rustbuket · 07-14-2012, 12:46 AM

There is a member here "chipflyer" I think that does replacement spid labels, here is a link to his website.

http://www.outintheshop.com/

You can add or change options as you like to suit your build or just have an original one reproduced.

70K10Hunter · 07-14-2012, 01:03 AM

thanks!! exactly what I was looking for.
saved to favorites

Lee H · 07-14-2012, 11:21 AM

I have emailed him regarding a new SPID for my truck with no response.

**72k5zl1** · 07-14-2012, 11:53 AM

me too, 2-3 times. no response. i need a couple done also.

chipflyer · 07-14-2012, 03:22 PM

Guys,
send emails to Jeff@outintheshop.com, very busy time of year for me. I will get back to you as soon as I can.

Jeff

Lee H · 07-14-2012, 03:31 PM

Quote:

Originally Posted by chipflyer

Guys,
send emails to Jeff@outintheshop.com, very busy time of year for me. I will get back to you as soon as I can.

Jeff

OK, will send a new email. Jeff@outintheshop.com is the email I used. Lee

**72k5zl1** · 07-14-2012, 04:47 PM

thanks!

PAWS 72 · 07-16-2012, 11:09 PM

mine is still readable.Talked to lay at bank,they still have a typewriter .she is going to do mine.Talk to a bank teller that you know they may do it for you

Lee H · 07-17-2012, 10:02 AM

Quote:

Originally Posted by PAWS 72

mine is still readable.Talked to lay at bank,they still have a typewriter .she is going to do mine.Talk to a bank teller that you know they may do it for you

Please post pictures of original one and the new one.

**leddzepp** · 07-17-2012, 11:51 AM

the typewriter font will not match the original and it will look very obviously homemade.
Posted via Mobile Device

chipflyer · 07-17-2012, 01:32 PM

Scott is correct, you will not find a typewriter font that matches.

Jeff
Posted via Mobile Device

**RenoKeene** · 07-17-2012, 01:59 PM

I just sent an e-mail also, hope someone responds as I was counting on paying one of our members instead of going outside the forum.

chipflyer · 07-17-2012, 02:07 PM

Hey renokeene, got the email that you replied to this thread but haven't got an email from you regarding spid work please send to Jeff@outintheshop.com

Jeff

blkcorvair · 07-17-2012, 08:56 PM

just a props for Jeff. His labels are Amazingly accurate. Got one over the winter. (May need another after I installed it upside down and peeled it back off to flip it)

**Dieselwrencher** · 07-17-2012, 09:20 PM

Jeff does top notch work!

AustinScott · 07-17-2012, 11:05 PM

If you guys want to try your own hand at re printing your own.... I still have that custom excel sheet that allows you to fill in the blanks yourself

Let me get some screen grabs of it so you all can check it out
Posted via Mobile Device

PAWS 72 · 07-17-2012, 11:32 PM

LeeH just getting back to computer,but she hasn't done mine yet. Just about all the venders on here will have them. Mine is blank. Thanks for the info on the typewriter.

**leddzepp** · 07-18-2012, 02:11 AM

i have 2 spids from jeff. you CANNOT distinguish them from originals. they are absolutely 100% dead solid perfect. dont waste your time or money on anything else, period.
Posted via Mobile Device

AustinScott · 07-18-2012, 02:35 AM

here are a few screen grabs from that excel doc I have.
I'm willing to send it to anyone who may want it free of charge.
I know its not perfect, but I figure since I have it might as well share if others are interested.

**Dieselwrencher** · 07-18-2012, 07:48 PM

I have 2 NOS SPID labels I'll gladly sell if some one wants to do the above. Cause it isn't worth it to me to try it. I'd mess it up and be emailing Jeff any how.

chipflyer · 07-18-2012, 11:02 PM

Thanks for the kind words, guys. I do appreciate it and also enjoy working with folks to get their labels perfect! I feel that for people who are into detail and are picky about what they add to their trucks, the labels are a great value. It isn't a simple process to do these, and it takes a bit of time to do one. I do get to all of them eventually and greatly appreciate patience during the process. I have a full-time job, two great (and young) kids and a wife that I enjoy spending time with. At times, it can get hard to squeeze in the labels. To speed the process, I have found that it works best to do the labels through email. I have enjoyed visiting about trucks and SPIDS with those who have called in the past, but can no longer afford the time it would take to visit with everyone who wants to have one by made over the phone.

Blank labels with a typewriter font or the excel file are not bad options IF you want to add non-original items to a label. In fact, I recommend it. I am proud to offer the correct label with the perfect text, but if if we add RPO codes to it that were never originally available, most would agree, it defeats the whole purpose!

Jeff

**chewychevy67** · 07-18-2012, 11:47 PM

Quote:

Originally Posted by leddzepp

i have 2 spids from jeff. you CANNOT distinguish them from originals. they are absolutely 100% dead solid perfect. dont waste your time or money on anything else, period.
Posted via Mobile Device

i agree even if you are adding options that werent originally available on the 67-72 trucks. I will be adding power windows to my spid but am building a truck as a "How i think it should have been available in 67" and that is how i will advertise it if someone asks. thats just me. either way Jeff's spids are the way to go no matter how long the wait is.

1972RedNeck · 07-18-2012, 11:55 PM

Quote:

Originally Posted by leddzepp

i have 2 spids from jeff. you CANNOT distinguish them from originals. they are absolutely 100% dead solid perfect. dont waste your time or money on anything else, period.

**leddzepp** · 07-19-2012, 12:27 AM

Quote:

Originally Posted by 1972RedNeck

07-13-2012, 09:05 PM	#1
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	SPID reprints? Hi new to the site and am getting ready to rebuild my 70 K10. I found out that I am the second owner of this truck. the PO had a rollbar welded in the cab, I cut it out and while doing so noticed that they cut the corner of the glove box door to clear the rollbar. got a new to me glove box door and was wondering if anybody out there that reprints the SPID sheet on the door. I have to paint the box door and dont want to lose the spec sheet info. Thanks in advance

07-14-2012, 12:46 AM	#2
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: SPID reprints? There is a member here "chipflyer" I think that does replacement spid labels, here is a link to his website. http://www.outintheshop.com/ You can add or change options as you like to suit your build or just have an original one reproduced. __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

07-14-2012, 01:03 AM	#3
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: SPID reprints? thanks!! exactly what I was looking for. saved to favorites

07-14-2012, 11:21 AM	#4
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: SPID reprints? I have emailed him regarding a new SPID for my truck with no response. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

07-14-2012, 11:53 AM	#5
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: SPID reprints? me too, 2-3 times. no response. i need a couple done also. __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

07-14-2012, 03:22 PM	#6
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprints? Guys, send emails to Jeff@outintheshop.com, very busy time of year for me. I will get back to you as soon as I can. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

07-14-2012, 04:47 PM	#8
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: SPID reprints? thanks! __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

07-16-2012, 11:09 PM	#9
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,471	Re: SPID reprints? mine is still readable.Talked to lay at bank,they still have a typewriter .she is going to do mine.Talk to a bank teller that you know they may do it for you

07-17-2012, 11:51 AM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,033	Re: SPID reprints? the typewriter font will not match the original and it will look very obviously homemade. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

07-17-2012, 01:32 PM	#12
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprints? Scott is correct, you will not find a typewriter font that matches. Jeff Posted via Mobile Device __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

07-17-2012, 01:59 PM	#13
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,029	Re: SPID reprints? I just sent an e-mail also, hope someone responds as I was counting on paying one of our members instead of going outside the forum. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

07-17-2012, 02:07 PM	#14
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprints? Hey renokeene, got the email that you replied to this thread but haven't got an email from you regarding spid work please send to Jeff@outintheshop.com Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

07-17-2012, 08:56 PM	#15
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: SPID reprints? just a props for Jeff. His labels are Amazingly accurate. Got one over the winter. (May need another after I installed it upside down and peeled it back off to flip it)

07-17-2012, 09:20 PM	#16
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: SPID reprints? Jeff does top notch work! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-17-2012, 11:05 PM	#17
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: SPID reprints? If you guys want to try your own hand at re printing your own.... I still have that custom excel sheet that allows you to fill in the blanks yourself Let me get some screen grabs of it so you all can check it out Posted via Mobile Device __________________ 68-SWB, 327, hooker headers, spintec mufflers, disk brake 3.5/5 drop, buddy buckets, 200-4R, 2200 stall, 3.73 12bolt Eaton Posi, My 68-SWB Photo Build Thread All my Google Albums



Register or Log In To remove these advertisements.

07-17-2012, 11:32 PM	#18
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,471	Re: SPID reprints? LeeH just getting back to computer,but she hasn't done mine yet. Just about all the venders on here will have them. Mine is blank. Thanks for the info on the typewriter.

07-18-2012, 02:11 AM	#19
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,033	Re: SPID reprints? i have 2 spids from jeff. you CANNOT distinguish them from originals. they are absolutely 100% dead solid perfect. dont waste your time or money on anything else, period. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

07-18-2012, 02:35 AM	#20
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: SPID reprints? here are a few screen grabs from that excel doc I have. I'm willing to send it to anyone who may want it free of charge. I know its not perfect, but I figure since I have it might as well share if others are interested. __________________ 68-SWB, 327, hooker headers, spintec mufflers, disk brake 3.5/5 drop, buddy buckets, 200-4R, 2200 stall, 3.73 12bolt Eaton Posi, My 68-SWB Photo Build Thread All my Google Albums

07-18-2012, 07:48 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: SPID reprints? I have 2 NOS SPID labels I'll gladly sell if some one wants to do the above. Cause it isn't worth it to me to try it. I'd mess it up and be emailing Jeff any how. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-18-2012, 11:02 PM	#22
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: SPID reprints? Thanks for the kind words, guys. I do appreciate it and also enjoy working with folks to get their labels perfect! I feel that for people who are into detail and are picky about what they add to their trucks, the labels are a great value. It isn't a simple process to do these, and it takes a bit of time to do one. I do get to all of them eventually and greatly appreciate patience during the process. I have a full-time job, two great (and young) kids and a wife that I enjoy spending time with. At times, it can get hard to squeeze in the labels. To speed the process, I have found that it works best to do the labels through email. I have enjoyed visiting about trucks and SPIDS with those who have called in the past, but can no longer afford the time it would take to visit with everyone who wants to have one by made over the phone. Blank labels with a typewriter font or the excel file are not bad options IF you want to add non-original items to a label. In fact, I recommend it. I am proud to offer the correct label with the perfect text, but if if we add RPO codes to it that were never originally available, most would agree, it defeats the whole purpose! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

Register or Log In To remove these advertisements.