Need help Identifying these axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBear · 08-07-2012, 09:15 PM

These supposedly came off an 85 3/4ton 4x4. Not sure what they are or what gears they are either. The rear axle seemed to have 14 bolts on the id cover and the front has 10 I believe and has a GM10 stamp, which I think is what they just call a 10bolt. Here are some pics...front axle first!

DBear · 08-07-2012, 09:17 PM

here are pics of the rear...

WarBeard · 08-07-2012, 11:58 PM

Front is a corporate 10 bolt. The rear is a 14 bolt semi floater 9.5 inch ring gear.

Front could be a 28 spline or a 30 spline. 30 spline is 1989-1991

Front is the same axle used in the half tons except on a 3/4 ton they added 8 lug outers.

the 14 bolts, a lot of them came with G-80 Lockers.

I would make a guess that it has 4:10 gears. Only a guess but a pretty popular ratio for those axles.

DBear · 08-08-2012, 02:47 AM

Quote:

Originally Posted by motomech

Front is a corporate 10 bolt. The rear is a 14 bolt semi floater 9.5 inch ring gear.

Front could be a 28 spline or a 30 spline. 30 spline is 1989-1991

Front is the same axle used in the half tons except on a 3/4 ton they added 8 lug outers.

the 14 bolts, a lot of them came with G-80 Lockers.

I would make a guess that it has 4:10 gears. Only a guess but a pretty popular ratio for those axles.

Would this set be worth buying? He wants 500 for the set.

And what does the semi floater term mean?

Redcap · 08-08-2012, 11:11 AM

Quote:

Originally Posted by DBear

Would this set be worth buying? He wants 500 for the set.

And what does the semi floater term mean?

WAY too much.

DirtyLarry · 08-08-2012, 11:18 AM

Quote:

Originally Posted by Redcap

WAY too much.

X2.....offer him $150 at most

Redcap · 08-08-2012, 06:25 PM

Quote:

Originally Posted by DirtyLarry

X2.....offer him $150 at most

That is about right. When I sell them up here, I generally take $50 for the 14bolt SF and 50-100 for a 10bolt front.

08-07-2012, 09:15 PM	#1
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Need help Identifying these axles These supposedly came off an 85 3/4ton 4x4. Not sure what they are or what gears they are either. The rear axle seemed to have 14 bolts on the id cover and the front has 10 I believe and has a GM10 stamp, which I think is what they just call a 10bolt. Here are some pics...front axle first! Attached Images

08-07-2012, 09:17 PM	#2
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Re: Need help Identifying these axles here are pics of the rear... Attached Images

08-07-2012, 11:58 PM	#3
WarBeard Registered User Join Date: Jul 2008 Location: Show low,az Posts: 808	Re: Need help Identifying these axles Front is a corporate 10 bolt. The rear is a 14 bolt semi floater 9.5 inch ring gear. Front could be a 28 spline or a 30 spline. 30 spline is 1989-1991 Front is the same axle used in the half tons except on a 3/4 ton they added 8 lug outers. the 14 bolts, a lot of them came with G-80 Lockers. I would make a guess that it has 4:10 gears. Only a guess but a pretty popular ratio for those axles. __________________ 1978 C10 Silverado Big 10 350/350.. play toy 1990 V1500 Suburban 350/700r4..Daily driver 1987 K10 Silverado 383/400.. Wife's rig WRECKED! 1989 V2500 Suburban 350/400.. SOLD! 1974 C10 Custom10 LWB 350/350.. SOLD! 1974 C10 Custom10 SWB 350/400.. SOLD! 1999 Silverado Z71 LS1.. Wife's rig WRECKED! On the hunt for a new project....... I'm a Chevy guy.....I'm just not a "NEW" Chevy guy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.