TX WTB Slotted Mags - Slots - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cericd** · 08-14-2012, 03:20 PM

Want to buy a set of slots for my 70 C10. I'm looking for this look.

My truck is currently six lug w/drums all around but am planning to swap to disc in front when I drop it. Anyone know if these wheels will clear discs? Thanks.

UPDATE: I'm looking for some vintage slot mag wheels in the 5x5 bolt pattern. 15x7, 15x7.5, 15x8 or 15x8.5

Thanks

coops714x4 · 08-14-2012, 03:33 PM

what disc setup are you going to use ??? are you going to stay with a 6 lug pattern or go to 5. If you are going with a "aftermarket" disc setup they should be able to tell you if they will clear. I believe if they will clear a stock wheel they will clear these mags, but don't quote me on that. I have a set of these mags on a 68 that I bought not too long ago. these are getting hard to find in decent shape. I would have to look at them again too remember what condition they are in, if in decent shape I would take $400 plus shipping. Coop

**cericd** · 08-14-2012, 04:10 PM

Hey Coop. I just heard from the owner of the truck in the example pic and he said that he's running discs up front. He was also able to give me the wheel diminsions. 15x7 with 3.5" backspacing for the front wheels and 15x8.5 with 3.75" backspacing for the backs. Let me know if that matches up with the set you have. I hadn't decided on the five lug swap or not. I figured if I ran across a set of six lug slots that would clear the ECE six lug discs then I would go that direction. Or, if I ran across a set of five lug slots I would just do a five lug conversion all around. Thanks.

viking427 · 08-14-2012, 07:23 PM

http://www.americanracingwheelsinfo....t_Slot_Mag.htm

**cericd** · 08-14-2012, 09:00 PM

Thanks viking427. I've seen those but those max out at 8" wide and I was hoping to get something wider for the back. Plus the back spacing isn't what I'd prefer. I want a little more lip. I may end up with the new ones as a last resort.

coops714x4 · 08-14-2012, 11:26 PM

It will be awhile before I can get ya some pics and info on the wheels, kinda tied up for the next couple of weeks. they are 6 lug, still on the truck and its in the back of a friends barn.

c1069 · 08-15-2012, 12:50 AM

http://visalia.craigslist.org/pts/3200035036.html

**cericd** · 08-23-2012, 01:25 PM

Still looking for some vintage slot mag wheels in the 5x5 bolt pattern. 15x7, 15x7.5, 15x8 or 15x8.5

Anyone?

coops714x4 · 08-24-2012, 12:09 AM

go look here >>>>http://www.akhwheels.com/

**cericd** · 10-15-2012, 08:50 PM

Still looking for these.

LEX · 10-15-2012, 09:12 PM

Did you see these?

http://67-72chevytrucks.com/vboard/s...d.php?t=547296

**cericd** · 10-15-2012, 10:29 PM

Yeah. I figured the wallowed out lug holes might be an issue and expensive to have fixed.

Posted via Mobile Device

**thelonerife** · 10-15-2012, 10:32 PM

Their made oblong to fit different bolt patterns. I have a set like that.

**cericd** · 10-15-2012, 10:43 PM

Those didn't look like a universal set to me. Looked like someone home-engineered them to work on another vehicle. I thought the uni-lug wheels had an oval indention like this for the lug washers.

**thelonerife** · 10-15-2012, 10:51 PM

no not all have the indentions

**cericd** · 10-15-2012, 10:56 PM

Oh. I wasn't aware.
Posted via Mobile Device

**LockDoc** · 10-15-2012, 11:45 PM

-
Mine have the oval lug holes. They take a lug nut with a shoulder that goes down inside the hole.

http://67-72chevytrucks.com/vboard/s...d.php?t=522608

LockDoc

CG · 10-16-2012, 12:14 AM

Boy those look great Leon. I had six of those and let two go at the last swap meet for 25 bucks for the pair. Need room to move in my small shop. Dunno if I will ever use the other ones, but I thought I would keep em if I ever wanna change up my panel some.

Sorry cericd ... didnt mean to jack your thread

**cericd** · 10-16-2012, 09:05 AM

Wouldn't be jacking my thread if you sell me those wheels.

**cericd** · 10-16-2012, 09:07 AM

Hey Leon, could you post a pic of the lugs you were talking about using with you slots?

454C10CHEVY · 10-16-2012, 02:36 PM

I know i just saw a set somewhere recently if i remember where i found it i will let you know

**cericd** · 10-16-2012, 02:41 PM

Cool thanks.
Posted via Mobile Device

**CC69Rat** · 10-16-2012, 03:25 PM

Careful on the front with 15", if you have too much backspacing they can hit the lower control arm when you turn the wheels really deep.

I'll keep my eyes open for you too. I know a guy that has a bunch of old original Torq Thrusts too .. (as well as a bunch of slots)

**cericd** · 10-16-2012, 03:35 PM

How much is too much? The owner of the truck at the top of this thread said he has no problems with a 15x7 with 3.5" backspacing and disc brakes.

496bb · 10-16-2012, 03:44 PM

i'll keep an eye out- i am looking for an 8 lug set myself in 16". i found a 15" set, can't remember 5 or 6 lug but went back to the ad here locally to check for ya and they were sold.

08-14-2012, 03:20 PM	#1
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	WTB Slotted Mags - Slots Want to buy a set of slots for my 70 C10. I'm looking for this look. My truck is currently six lug w/drums all around but am planning to swap to disc in front when I drop it. Anyone know if these wheels will clear discs? Thanks. UPDATE: I'm looking for some vintage slot mag wheels in the 5x5 bolt pattern. 15x7, 15x7.5, 15x8 or 15x8.5 Thanks Last edited by cericd; 08-23-2012 at 01:25 PM. Reason: Updated information

08-14-2012, 03:33 PM	#2
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: WTB Slotted Mags - Slots what disc setup are you going to use ??? are you going to stay with a 6 lug pattern or go to 5. If you are going with a "aftermarket" disc setup they should be able to tell you if they will clear. I believe if they will clear a stock wheel they will clear these mags, but don't quote me on that. I have a set of these mags on a 68 that I bought not too long ago. these are getting hard to find in decent shape. I would have to look at them again too remember what condition they are in, if in decent shape I would take $400 plus shipping. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

08-14-2012, 04:10 PM	#3
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Hey Coop. I just heard from the owner of the truck in the example pic and he said that he's running discs up front. He was also able to give me the wheel diminsions. 15x7 with 3.5" backspacing for the front wheels and 15x8.5 with 3.75" backspacing for the backs. Let me know if that matches up with the set you have. I hadn't decided on the five lug swap or not. I figured if I ran across a set of six lug slots that would clear the ECE six lug discs then I would go that direction. Or, if I ran across a set of five lug slots I would just do a five lug conversion all around. Thanks. Last edited by cericd; 08-14-2012 at 05:00 PM.

08-14-2012, 07:23 PM	#4
viking427 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 225	Re: WTB Slotted Mags - Slots http://www.americanracingwheelsinfo....t_Slot_Mag.htm

08-14-2012, 09:00 PM	#5
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Thanks viking427. I've seen those but those max out at 8" wide and I was hoping to get something wider for the back. Plus the back spacing isn't what I'd prefer. I want a little more lip. I may end up with the new ones as a last resort. Last edited by cericd; 08-14-2012 at 09:01 PM. Reason: corrections

08-14-2012, 11:26 PM	#6
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: WTB Slotted Mags - Slots It will be awhile before I can get ya some pics and info on the wheels, kinda tied up for the next couple of weeks. they are 6 lug, still on the truck and its in the back of a friends barn. __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

08-15-2012, 12:50 AM	#7
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB Slotted Mags - Slots http://visalia.craigslist.org/pts/3200035036.html __________________ Pancho 69 c/10 step side 454/400 with 3.07

08-23-2012, 01:25 PM	#8
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Still looking for some vintage slot mag wheels in the 5x5 bolt pattern. 15x7, 15x7.5, 15x8 or 15x8.5 Anyone?

08-24-2012, 12:09 AM	#9
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: WTB Slotted Mags - Slots go look here >>>>http://www.akhwheels.com/ __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-15-2012, 08:50 PM	#10
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Still looking for these.

10-15-2012, 09:12 PM	#11
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: WTB Slotted Mags - Slots Did you see these? http://67-72chevytrucks.com/vboard/s...d.php?t=547296

10-15-2012, 10:29 PM	#12
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Yeah. I figured the wallowed out lug holes might be an issue and expensive to have fixed. Posted via Mobile Device

10-15-2012, 10:32 PM	#13
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB Slotted Mags - Slots Their made oblong to fit different bolt patterns. I have a set like that. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-15-2012, 10:43 PM	#14
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Those didn't look like a universal set to me. Looked like someone home-engineered them to work on another vehicle. I thought the uni-lug wheels had an oval indention like this for the lug washers. Attached Images

10-15-2012, 10:51 PM	#15
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB Slotted Mags - Slots no not all have the indentions __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687



Register or Log In To remove these advertisements.

10-15-2012, 10:56 PM	#16
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Oh. I wasn't aware. Posted via Mobile Device

10-15-2012, 11:45 PM	#17
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,394	Re: WTB Slotted Mags - Slots - Mine have the oval lug holes. They take a lug nut with a shoulder that goes down inside the hole. http://67-72chevytrucks.com/vboard/s...d.php?t=522608 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-16-2012, 12:14 AM	#18
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,822	Re: WTB Slotted Mags - Slots Boy those look great Leon. I had six of those and let two go at the last swap meet for 25 bucks for the pair. Need room to move in my small shop. Dunno if I will ever use the other ones, but I thought I would keep em if I ever wanna change up my panel some. Sorry cericd ... didnt mean to jack your thread __________________ … … … … … … … … ... … … … … … … … … … … …

10-16-2012, 09:05 AM	#19
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Wouldn't be jacking my thread if you sell me those wheels.

10-16-2012, 09:07 AM	#20
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Hey Leon, could you post a pic of the lugs you were talking about using with you slots?

10-16-2012, 02:36 PM	#21
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: WTB Slotted Mags - Slots I know i just saw a set somewhere recently if i remember where i found it i will let you know __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

10-16-2012, 02:41 PM	#22
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots Cool thanks. Posted via Mobile Device

10-16-2012, 03:25 PM	#23
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: WTB Slotted Mags - Slots Careful on the front with 15", if you have too much backspacing they can hit the lower control arm when you turn the wheels really deep. I'll keep my eyes open for you too. I know a guy that has a bunch of old original Torq Thrusts too .. (as well as a bunch of slots) __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-16-2012, 03:35 PM	#24
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,134	Re: WTB Slotted Mags - Slots How much is too much? The owner of the truck at the top of this thread said he has no problems with a 15x7 with 3.5" backspacing and disc brakes.

10-16-2012, 03:44 PM	#25
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 281	Re: WTB Slotted Mags - Slots i'll keep an eye out- i am looking for an 8 lug set myself in 16". i found a 15" set, can't remember 5 or 6 lug but went back to the ad here locally to check for ya and they were sold.

Register or Log In To remove these advertisements.