SC fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red69ss · 08-15-2012, 01:53 PM

Heres a 72 tailgate , it is really straight with a few dings. I took the da sander and cut the paint off the bottum and upper inside of the gate this morning to check its condition, it has some bondo on the upper but the bottum is good other than a small dent. There is a place on the outside with a fair amount of bondo that I'm sure is covering a dent. It needs to be blasted but I don't have the time to mess with it. As far as I can see it is straight with no bow. .......I want $120 for it.......local pick up only on all parts listed.

TAILGATE SOLD

red69ss · 08-15-2012, 01:54 PM

couple more of gate

red69ss · 08-15-2012, 01:59 PM

this is a 72 tilt column, it needs to be cleaned up and painted. The column is tight but the shift arm has a little play in it, I would consider it normal wear for a 40 year old part. it comes with the intermediate shaft and the steering wheel as pictured......I want $200 for it....local only........TILT COLUMN SOLD

red69ss · 08-15-2012, 02:06 PM

this is a set of fenders off a 70 gmc, they are the same as a 68 chevy. I blasted the inside of both fenders and put epoxy primer on them, the drivers fender is in great shape and needs only minor work . The pass side had a hole in it that I repaired that needs more bodywork. both cups are in great shape........ I want $100 for the set.......local only

red69ss · 08-15-2012, 02:08 PM

pic of repaired area on pass. fender

c101970 · 08-15-2012, 07:41 PM

I'd be interested in the fenders and tailgate if you would ship. Where is lancaster located?

red69ss · 08-15-2012, 07:47 PM

not interested in shipping, its just below charlotte, come on up.

Leroy-B1 · 08-15-2012, 09:18 PM

I'll take the tailgate
Posted via Mobile Device

red69ss · 08-15-2012, 09:27 PM

Quote:

Originally Posted by Leroy-B1

I'll take the tailgate
Posted via Mobile Device

Let me give c101970 a chance to respond and if he doesn't want it its yours.

c101970 · 08-16-2012, 06:55 AM

Thanks Red. No time for a road trip right now. I've got some work coming up in your area, But that will bed a couple months.

**WIDESIDE72** · 08-16-2012, 08:36 AM

Letme know if you change yourmind on shipping the tilt without the wheel.
Posted via Mobile Device

red69ss · 08-16-2012, 12:59 PM

Leroy-B1 looks like the tailgate is yours.......................wideside72 I'll let you know if I change my mind.

red69ss · 08-19-2012, 09:07 PM

ttt

red69ss · 08-23-2012, 07:54 PM

ttt

Bennett68C10 · 08-27-2012, 08:27 AM

Definetely interested in the fenders if you decide to ship. Also my niece goes to school in South Carolina and could possibly pick them up for me. How far ar you from the Univesity of South Carolina.

alsriv2 · 08-27-2012, 11:05 AM

I am seriously interested in the tilt column if you decide to change on shipping. I will be rolling thru your area, but not until mid-november.

red69ss · 08-27-2012, 04:00 PM

Quote:

Originally Posted by Bennett--G4L

Definetely interested in the fenders if you decide to ship. Also my niece goes to school in South Carolina and could possibly pick them up for me. How far ar you from the Univesity of South Carolina.

Not wanting to ship , I am about an hour from USC-columbia.

Quote:

Originally Posted by alsriv2

I am seriously interested in the tilt column if you decide to change on shipping. I will be rolling thru your area, but not until mid-november.

Not wanting to ship, if its still available contact me.

Bennett68C10 · 08-27-2012, 07:21 PM

Quote:

Originally Posted by red69ss

Not wanting to ship , I am about an hour from USC-columbia.

Thanks I will let you know

CLTBurban · 08-28-2012, 09:51 PM

PM sent

red69ss · 09-02-2012, 11:10 PM

ttt

red69ss · 09-10-2012, 07:45 AM

ttt

beach · 09-10-2012, 08:22 AM

I am interested in the tilt column, I'm in ft mill and would like to come check it out. Can I get a contact number?

red69ss · 09-10-2012, 04:44 PM

Quote:

Originally Posted by beach

I am interested in the tilt column, I'm in ft mill and would like to come check it out. Can I get a contact number?

Answered your pm.

08-15-2012, 01:53 PM	#1
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders Heres a 72 tailgate , it is really straight with a few dings. I took the da sander and cut the paint off the bottum and upper inside of the gate this morning to check its condition, it has some bondo on the upper but the bottum is good other than a small dent. There is a place on the outside with a fair amount of bondo that I'm sure is covering a dent. It needs to be blasted but I don't have the time to mess with it. As far as I can see it is straight with no bow. .......I want $120 for it.......local pick up only on all parts listed. TAILGATE SOLD Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 08-23-2012 at 07:53 PM.

08-15-2012, 01:54 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders couple more of gate Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-15-2012, 01:59 PM	#3
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders this is a 72 tilt column, it needs to be cleaned up and painted. The column is tight but the shift arm has a little play in it, I would consider it normal wear for a 40 year old part. it comes with the intermediate shaft and the steering wheel as pictured......I want $200 for it....local only........TILT COLUMN SOLD Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 09-12-2012 at 06:19 PM.

08-15-2012, 02:06 PM	#4
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders this is a set of fenders off a 70 gmc, they are the same as a 68 chevy. I blasted the inside of both fenders and put epoxy primer on them, the drivers fender is in great shape and needs only minor work . The pass side had a hole in it that I repaired that needs more bodywork. both cups are in great shape........ I want $100 for the set.......local only Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-15-2012, 02:08 PM	#5
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders pic of repaired area on pass. fender Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-15-2012, 07:41 PM	#6
c101970 Registered User Join Date: Aug 2012 Location: Glenwood,GA Posts: 2	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders I'd be interested in the fenders and tailgate if you would ship. Where is lancaster located?

08-15-2012, 07:47 PM	#7
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders not interested in shipping, its just below charlotte, come on up. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-15-2012, 09:18 PM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders I'll take the tailgate Posted via Mobile Device

08-16-2012, 06:55 AM	#10
c101970 Registered User Join Date: Aug 2012 Location: Glenwood,GA Posts: 2	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders Thanks Red. No time for a road trip right now. I've got some work coming up in your area, But that will bed a couple months.

08-16-2012, 08:36 AM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders Letme know if you change yourmind on shipping the tilt without the wheel. Posted via Mobile Device

08-16-2012, 12:59 PM	#12
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders Leroy-B1 looks like the tailgate is yours.......................wideside72 I'll let you know if I change my mind. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-19-2012, 09:07 PM	#13
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-23-2012, 07:54 PM	#14
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-27-2012, 08:27 AM	#15
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders Definetely interested in the fenders if you decide to ship. Also my niece goes to school in South Carolina and could possibly pick them up for me. How far ar you from the Univesity of South Carolina. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

08-27-2012, 11:05 AM	#16
alsriv2 Registered User Join Date: Sep 2010 Location: Formerly MD and San Diego, now loving life in Arizona Posts: 1,636	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders I am seriously interested in the tilt column if you decide to change on shipping. I will be rolling thru your area, but not until mid-november. __________________ Alan 2012 Ram 3500 Dually Crew Cab 6.7 Cummins 2014 Palomino Columbus 340RK 5th wheel '69 Chevy C10 396BB



Register or Log In To remove these advertisements.

08-28-2012, 09:51 PM	#19
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders PM sent __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

09-02-2012, 11:10 PM	#20
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-10-2012, 07:45 AM	#21
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-10-2012, 08:22 AM	#22
beach Registered User Join Date: Oct 2011 Location: ft mill sc Posts: 47	Re: fleetside tailgate, tilt column, 68 chevy/68-72 gmc fenders I am interested in the tilt column, I'm in ft mill and would like to come check it out. Can I get a contact number? __________________ 70 chevy long bed 72 gmc short bed 69 427 corvette (next project)

Register or Log In To remove these advertisements.