SC 68 Chassis, 5 lug set up and 68 grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red69ss · 08-16-2012, 01:44 PM

This is a 68 shortbed chassis that I blasted and painted 4 years ago. It has been sitting outside and is rusting again, so it will need to be cleaned and painted again. It has some pitting on it but nothing too bad.

I also have a 5 lug rearend out of 72 automatic truck not sure of gear but the rearend was in working condition.

I also have a set of A-arms and the front spindle setup from a 72. I blasted and painted the A-arms and engine stands.

I have a drag link too if needed.

I want $300 for everything, or I will piece it out if someone doesn't want all of it......local pick up only

Rearend sold to Leroy-b1 , frame sold to silverbird

red69ss · 08-16-2012, 01:46 PM

A-arms and spindles

back up for sale $100 for all of it

red69ss · 08-16-2012, 01:53 PM

heres the grill it is really clean and straight. I blasted it and put it in epoxy primer, it only had a couple of small pin holes in it which I welded up. It has some pitting where the grill loops go but nothing bad or that would show with loops in place.....I want $100 for it ....local only ......price dropped

GRILL SOLD

gcburdic · 08-17-2012, 10:45 AM

Dwayne....any chance the rear end is posi?

Leroy-B1 · 08-17-2012, 11:13 AM

interested in the frame and stuff Dewayne...can you pm me my total so far before I decide for sure...?

red69ss · 08-17-2012, 04:26 PM

Quote:

Originally Posted by gcburdic

Dwayne....any chance the rear end is posi?

I don't think so Geoff, but not sure havn't had the cover off.

Quote:

Originally Posted by Leroy-B1

interested in the frame and stuff Dewayne...can you pm me my total so far before I decide for sure...?

sure will do.

Beetle · 08-17-2012, 04:50 PM

Can I get in line for the grille?

Leroy-B1 · 08-17-2012, 05:15 PM

Dewayne going to pass on whole lot but would be interested in rear end only
Posted via Mobile Device

red69ss · 08-17-2012, 05:46 PM

Quote:

Originally Posted by Beetle

Can I get in line for the grille?

the grill is yours if you want it, send me a pm and we can talk about when you want to come get it...thanks

Quote:

Originally Posted by Leroy-B1

Dewayne going to pass on whole lot but would be interested in rear end only
Posted via Mobile Device

I would take $120 for just the rearend as pictured. let me know.

rmmurphy · 08-18-2012, 08:55 AM

im interested in all of the 5 lug stuff. its available

Silverbird · 08-18-2012, 02:21 PM

Interested in the frame.
PM sent
Posted via Mobile Device

red69ss · 08-18-2012, 05:59 PM

Quote:

Originally Posted by rmmurphy

im interested in all of the 5 lug stuff. its available

got your pm, for the a-arms and spindles I'll take $100 for all of it, and if you want the rearend its $120 if leroy-b1 turns it down.

Quote:

Originally Posted by Silverbird

Interested in the frame.
PM sent
Posted via Mobile Device

got your pm, I'll take $100 for just the silver frame.

Silverbird · 08-18-2012, 07:11 PM

I'll take it.
Posted via Mobile Device

Silverbird · 08-18-2012, 08:31 PM

I'll take the rearend as well
Posted via Mobile Device

Beetle · 08-18-2012, 08:33 PM

Gonna back off on the grille for now, sorry.

red69ss · 08-19-2012, 01:31 AM

Quote:

Originally Posted by Silverbird

I'll take it.
Posted via Mobile Device

ok I'll call you about coming to get it, on the rearend let me let Leroy-B1 decide if he wants it.

Quote:

Originally Posted by Silverbird

I'll take the rearend as well
Posted via Mobile Device

Quote:

Originally Posted by Beetle

Gonna back off on the grille for now, sorry.

No problem , grill still for sale.

rmmurphy · 08-19-2012, 05:03 PM

pm sent for 5 lug stuff if still available

red69ss · 08-19-2012, 08:55 PM

Quote:

Originally Posted by rmmurphy

pm sent for 5 lug stuff if still available

pm answered

red69ss · 08-23-2012, 07:52 PM

ttt .......Grill still for sale.

red69ss · 08-29-2012, 09:48 AM

ttt..... grill still for sale at lower price of $100

red69ss · 09-02-2012, 11:17 PM

ttt

red69ss · 09-10-2012, 07:42 AM

ttt

red69ss · 09-22-2012, 03:57 PM

ttt

08-16-2012, 01:44 PM	#1
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	68 Chassis, 5 lug set up and 68 grill This is a 68 shortbed chassis that I blasted and painted 4 years ago. It has been sitting outside and is rusting again, so it will need to be cleaned and painted again. It has some pitting on it but nothing too bad. I also have a 5 lug rearend out of 72 automatic truck not sure of gear but the rearend was in working condition. I also have a set of A-arms and the front spindle setup from a 72. I blasted and painted the A-arms and engine stands. I have a drag link too if needed. I want $300 for everything, or I will piece it out if someone doesn't want all of it......local pick up only Rearend sold to Leroy-b1 , frame sold to silverbird Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 08-20-2012 at 10:00 AM.

08-16-2012, 01:46 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill A-arms and spindles back up for sale $100 for all of it Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 09-22-2012 at 03:57 PM.

08-16-2012, 01:53 PM	#3
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill heres the grill it is really clean and straight. I blasted it and put it in epoxy primer, it only had a couple of small pin holes in it which I welded up. It has some pitting where the grill loops go but nothing bad or that would show with loops in place.....I want $100 for it ....local only ......price dropped GRILL SOLD Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 10-13-2012 at 06:44 PM.

08-17-2012, 10:45 AM	#4
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 68 Chassis, 5 lug set up and 68 grill Dwayne....any chance the rear end is posi? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-17-2012, 11:13 AM	#5
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 68 Chassis, 5 lug set up and 68 grill interested in the frame and stuff Dewayne...can you pm me my total so far before I decide for sure...?

08-17-2012, 04:50 PM	#7
Beetle Registered User Join Date: May 2009 Location: Fayetteville, NC Posts: 725	Re: 68 Chassis, 5 lug set up and 68 grill Can I get in line for the grille? __________________ Jason TEAM C10 HOT ROD POWER TOUR 689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins

08-17-2012, 05:15 PM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 68 Chassis, 5 lug set up and 68 grill Dewayne going to pass on whole lot but would be interested in rear end only Posted via Mobile Device

08-18-2012, 08:55 AM	#10
rmmurphy Registered User Join Date: Apr 2012 Location: columbia sc Posts: 40	Re: 68 Chassis, 5 lug set up and 68 grill im interested in all of the 5 lug stuff. its available

08-18-2012, 02:21 PM	#11
Silverbird Registered User Join Date: Jan 2008 Location: chantilly virginia Posts: 44	Re: 68 Chassis, 5 lug set up and 68 grill Interested in the frame. PM sent Posted via Mobile Device

08-18-2012, 07:11 PM	#13
Silverbird Registered User Join Date: Jan 2008 Location: chantilly virginia Posts: 44	Re: 68 Chassis, 5 lug set up and 68 grill I'll take it. Posted via Mobile Device

08-18-2012, 08:31 PM	#14
Silverbird Registered User Join Date: Jan 2008 Location: chantilly virginia Posts: 44	Re: 68 Chassis, 5 lug set up and 68 grill I'll take the rearend as well Posted via Mobile Device

08-18-2012, 08:33 PM	#15
Beetle Registered User Join Date: May 2009 Location: Fayetteville, NC Posts: 725	Re: 68 Chassis, 5 lug set up and 68 grill Gonna back off on the grille for now, sorry. __________________ Jason TEAM C10 HOT ROD POWER TOUR 689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins

08-19-2012, 05:03 PM	#17
rmmurphy Registered User Join Date: Apr 2012 Location: columbia sc Posts: 40	Re: 68 Chassis, 5 lug set up and 68 grill pm sent for 5 lug stuff if still available

08-23-2012, 07:52 PM	#19
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill ttt .......Grill still for sale. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-29-2012, 09:48 AM	#20
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill ttt..... grill still for sale at lower price of $100 __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein



Register or Log In To remove these advertisements.

09-02-2012, 11:17 PM	#21
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-10-2012, 07:42 AM	#22
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-22-2012, 03:57 PM	#23
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 68 Chassis, 5 lug set up and 68 grill ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

Register or Log In To remove these advertisements.