The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-04-2012, 11:49 AM   #1
RexDodge
Registered User
 
Join Date: Apr 2008
Location: Oregon City, Oregon
Posts: 741
finishing up behind the seat box

Here is a few pics of the box that we will be installing behind the seat to house a couple of 6x9's, a 10" lp sub and an amp. We designed it to have a smooth line from the lip below the window to the floor and also follow the contour of the curve in the area previously occupied by the gas tank. The side pic show the wire chase. Power will be supplied through the floor up to the amp. Signal wires will just run down the middle under the seat to the tuner in the dash. We plan to cover it with the same material being used on the door panels (marine naugahyde in matte black). I will post up some completed pics once we have it installed.
Attached Images
   
RexDodge is offline   Reply With Quote
Old 09-04-2012, 10:11 PM   #2
Gonepostal
Registered User
 
Gonepostal's Avatar
 
Join Date: Jun 2012
Location: Mobile Al
Posts: 103
Re: finishing up behind the seat box

very nice need one for mine
Gonepostal is offline   Reply With Quote
Old 09-22-2012, 02:48 AM   #3
RexDodge
Registered User
 
Join Date: Apr 2008
Location: Oregon City, Oregon
Posts: 741
Re: finishing up behind the seat box

Pyle 1600w amp, 2 Sony 6X9 speakers, 10" Alpine type E sub, 2 5" up front in the stock location under the dash with a Kenwood reciever (usb aux with blue tooth). Sounds good. Putting the seat in tomorrow for the final tune. I will cover it next month with a marine naugahyde (matte black).
Attached Images
   
RexDodge is offline   Reply With Quote
Old 10-19-2012, 10:47 AM   #4
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
Re: finishing up behind the seat box

Quote:
Originally Posted by RexDodge View Post
Here is a few pics of the box that we will be installing behind the seat to house a couple of 6x9's, a 10" lp sub and an amp. We designed it to have a smooth line from the lip below the window to the floor and also follow the contour of the curve in the area previously occupied by the gas tank. The side pic show the wire chase. Power will be supplied through the floor up to the amp. Signal wires will just run down the middle under the seat to the tuner in the dash. We plan to cover it with the same material being used on the door panels (marine naugahyde in matte black). I will post up some completed pics once we have it installed.
How do you secure the box in ?
blazer2007 is offline   Reply With Quote
Old 10-19-2012, 01:18 PM   #5
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
Re: finishing up behind the seat box

That looks real nice! I need to build mine, but I have so many other projects that need attention...
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Old 10-23-2012, 11:23 AM   #6
RexDodge
Registered User
 
Join Date: Apr 2008
Location: Oregon City, Oregon
Posts: 741
Re: finishing up behind the seat box

@ blazer2007, We drilled holes at the points where the cab mounting bolts come up through the floor. I just installed longer bolts and used large diameter washers.
RexDodge is offline   Reply With Quote
Old 10-23-2012, 11:24 AM   #7
RexDodge
Registered User
 
Join Date: Apr 2008
Location: Oregon City, Oregon
Posts: 741
Re: finishing up behind the seat box

Quote:
Originally Posted by jimmydean View Post
That looks real nice! I need to build mine, but I have so many other projects that need attention...
Right there with you. So many projects...and they have nothing to do with the truck!
RexDodge is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com