stand alone harness and computer?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Crupe · 09-15-2012, 01:52 PM

OK so can anyone tell me the best place to get or have my harness made into a stand alone harness, also where is the best place to get my computer reflashed. Im doing a 5.3 swap on a 68 c10. Im trying to do it on a budget as well.

brad_man_72 · 09-15-2012, 02:15 PM

I used waitformeperformance. I think it cost me about $200 and it took them anout a month to get it back to me.
I tried to use a cheap parts house fuse block, that failed. I got a nice fuse block from painless, it was pricey but it works.
Posted via Mobile Device

**john** · 09-15-2012, 02:21 PM

Heres a section for engine swap info for 5.3's etc. its a sticky in the engine and drivetrain section. And welcome to the board.

http://67-72chevytrucks.com/vboard/f...play.php?f=206

09-15-2012, 01:52 PM	#1
Crupe Registered User Join Date: Sep 2012 Location: Muskegon, mi Posts: 9	stand alone harness and computer?? OK so can anyone tell me the best place to get or have my harness made into a stand alone harness, also where is the best place to get my computer reflashed. Im doing a 5.3 swap on a 68 c10. Im trying to do it on a budget as well.

09-15-2012, 02:15 PM	#2
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: stand alone harness and computer?? I used waitformeperformance. I think it cost me about $200 and it took them anout a month to get it back to me. I tried to use a cheap parts house fuse block, that failed. I got a nice fuse block from painless, it was pricey but it works. Posted via Mobile Device __________________ 67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project,

09-15-2012, 02:21 PM	#3
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: stand alone harness and computer?? Heres a section for engine swap info for 5.3's etc. its a sticky in the engine and drivetrain section. And welcome to the board. http://67-72chevytrucks.com/vboard/f...play.php?f=206 __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.