IA 67-72 Diesel Tach Air Pressure Gauge Cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 09-18-2012, 05:40 PM

I purchased this with the intentions of building another truck. I have woke up and realized I won't be building another truck for a while. Instead I will be building a pulling tractor.

So, my back up cluster is for sale. It is a cable driven diesel tach. The tach works, I have tested it. It does have the air pressure gauge and an 80lb oil pressure gauge. These gauges are dirty and will need cleaned. the lens on this cluster is pretty nice. The bezel has the choke provision as well. These are getting super hard to find. $350 OBO plus shipping.

**special-K** · 09-19-2012, 07:56 AM

Does it matter what diesel the tach is for? I'm wondering if the number of cylinders matters,like with gas. I'm not sure how the cable drive counts RPMs.

**too much stuff** · 09-19-2012, 08:42 AM

Quote:

Originally Posted by special-K

Does it matter what diesel the tach is for? I'm wondering if the number of cylinders matters,like with gas. I'm not sure how the cable drive counts RPMs.

I know there are 2 different red lines on the diesel tachs. 2800 and 3200 i believe. Not sure which goes with which engine...

**Dieselwrencher** · 09-19-2012, 10:22 AM

Quote:

Originally Posted by special-K

Does it matter what diesel the tach is for? I'm wondering if the number of cylinders matters,like with gas. I'm not sure how the cable drive counts RPMs.

I don't believe it matters on the tach end. I think the gearing will be on the gear box on the engine side, if your engine has one. On the detroits it was off the front gear drive so it was 1:1. I hooked a drill to these tachs, and they work. I don't know the speed of the drill accurately. I'm sure there is a difference depending on what engine you're wanting to use. Ryan.

71CRBURB · 09-19-2012, 10:28 AM

Do you know if there is a way to get this tach to work on Cummins?

**Dieselwrencher** · 09-19-2012, 10:31 AM

Quote:

Originally Posted by 71CRBURB

Do you know if there is a way to get this tach to work on Cummins?

What year cummins? I have the part numbers for the tach drive for the P-pump style 12v. I'm guessing you need one for a common rail by your screen name?

Livrat · 09-19-2012, 11:54 AM

Ryan,
Are you looking for anything in trade?

**Dieselwrencher** · 09-19-2012, 02:02 PM

Quote:

Originally Posted by Livrat

Ryan,
Are you looking for anything in trade?

Parts for a 5.9 cummins. Like 94-02 fan hub, 94-04 nv4500 bell housing, 94-02 engine adapter.

Maybe some 72 extreme bend tow hooks.

**Dieselwrencher** · 09-19-2012, 02:04 PM

Quote:

Originally Posted by Dieselwrencher

I don't believe it matters on the tach end. I think the gearing will be on the gear box on the engine side, if your engine has one. On the detroits it was off the front gear drive so it was 1:1. I hooked a drill to these tachs, and they work. I don't know the speed of the drill accurately. I'm sure there is a difference depending on what engine you're wanting to use. Ryan.

Ok, I put these clusters on a truck today. I have to get a new end on the drive cable. The one on mine is too big and I think it is popping out of the input of the tach and causing the tach to bounce. But, these tachs seemed to match the dodge's tach.

71CRBURB · 09-19-2012, 02:18 PM

Quote:

Originally Posted by Dieselwrencher

What year cummins? I have the part numbers for the tach drive for the P-pump style 12v. I'm guessing you need one for a common rail by your screen name?

Yeah I am trying to put a commonrail in there. Hoping to get a build thread started soon.

STOCKISH · 09-19-2012, 02:25 PM

Nice piece Ryan.

**Dieselwrencher** · 09-19-2012, 04:14 PM

Quote:

Originally Posted by 1972SuperCheyenne

Nice piece Ryan.

Thanks. How have you been Josh?

**Dieselwrencher** · 09-19-2012, 04:15 PM

Sale pending.

STOCKISH · 09-19-2012, 05:58 PM

Quote:

Originally Posted by Dieselwrencher

Thanks. How have you been Josh?

Doing well. Took a break for a bit after losing a friend but he's in a better place now! Ready to get back in the game.

ryanroo · 09-19-2012, 08:51 PM

i am interested if the pending sale falls through.

Ryan

**Dieselwrencher** · 09-19-2012, 09:34 PM

Quote:

Originally Posted by 1972SuperCheyenne

Doing well. Took a break for a bit after losing a friend but he's in a better place now! Ready to get back in the game.

Sorry to hear about the loss of your friend. You ever get a ccswb finished?

STOCKISH · 09-19-2012, 10:07 PM

No, it was at a buddys house when the tornadoes came through and dropped trees across the cab and chassis. OOPS. Scrap metal now! LOL.

mosesburb · 09-19-2012, 11:05 PM

Quote:

Originally Posted by ryanroo

i am interested if the pending sale falls through.

Ryan

Yeah, me too.

**71blksuper4x4** · 03-25-2014, 09:26 PM

Did this sell Ryan? Trevor

**Dieselwrencher** · 03-26-2014, 06:27 PM

Trevor, yes it did. Ryan.

09-18-2012, 05:40 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	67-72 Diesel Tach Air Pressure Gauge Cluster I purchased this with the intentions of building another truck. I have woke up and realized I won't be building another truck for a while. Instead I will be building a pulling tractor. So, my back up cluster is for sale. It is a cable driven diesel tach. The tach works, I have tested it. It does have the air pressure gauge and an 80lb oil pressure gauge. These gauges are dirty and will need cleaned. the lens on this cluster is pretty nice. The bezel has the choke provision as well. These are getting super hard to find. $350 OBO plus shipping. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-19-2012, 07:56 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Does it matter what diesel the tach is for? I'm wondering if the number of cylinders matters,like with gas. I'm not sure how the cable drive counts RPMs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-19-2012, 10:28 AM	#5
71CRBURB Registered User Join Date: Feb 2012 Location: Columbus, IN Posts: 30	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Do you know if there is a way to get this tach to work on Cummins?

09-19-2012, 11:54 AM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Ryan, Are you looking for anything in trade?

09-19-2012, 02:25 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Nice piece Ryan. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-19-2012, 04:15 PM	#13
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Sale pending. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-19-2012, 08:51 PM	#15
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster i am interested if the pending sale falls through. Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

09-19-2012, 10:07 PM	#17
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster No, it was at a buddys house when the tornadoes came through and dropped trees across the cab and chassis. OOPS. Scrap metal now! LOL. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-25-2014, 09:26 PM	#19
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Did this sell Ryan? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-26-2014, 06:27 PM	#20
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 67-72 Diesel Tach Air Pressure Gauge Cluster Trevor, yes it did. Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.