Sure enough,I forgot the camera. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PanelDeland · 10-11-2012, 09:22 PM

and saw what is probably the wildest idea for a 67-72 in a while.It was a longbed,but they cut the cab off above the windshield and at the back of the floor.Then they remved the front of the bed and trimmed the bed floor back from the front.Then they shortened the whole thing.The front of the bed was where the door hinges would normally be.It was apretty beat example of a truck but they managed to make a rat cruiser out of what they had.It was primered with a rusty floor but they were cruisin and having a blast.The tailgate was open and it had buckets so they could go between them to get in.It actually looked pretty decent except for the front of the bed doesn't exactly match the rear of the front fender.

BTW it was also a GMC.

67ChevyRedneck · 10-12-2012, 10:51 AM

weird... The doors are a few feet wide, so even with a longbed, if the front of the bed was lined up with the back of the front fender... that's a heck of a short wheel base?

**70STOVEBOLT** · 10-12-2012, 05:21 PM

midniteblues · 10-12-2012, 06:04 PM

there was a pic of a truck described like this posted a while ago.
It was cool it was done roadster style and the lwb bed sides were pulled all the way up to the front fenders. with looked too be a shortend wheel base
I think there was before and after pics of it after getting bodyworked
unfortunatly i suc at searches and links

YBNORML · 10-12-2012, 09:51 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=513079

I think this is the truck you guys are talking about. The link gives a little more info. I personally like it

67ChevyRedneck · 10-12-2012, 10:45 PM

That's actually pretty damn cool!

PanelDeland · 10-12-2012, 10:50 PM

Same concept except for the one I saw was a rat and built from what looked to be a junker otherwise.The wheelbase looked shorter than a Blazer but it's hard to tell without the doors.Seems like a good way to put stuff that normally wouldn't get used into something fairly cool.

67c10rustbuket · 10-12-2012, 11:42 PM

That is pretty cool

VA72C10 · 10-12-2012, 11:49 PM

I have thought of doing this before....I like it although i'd have to still have functioning doors or my wife wouldn't ride in it

Posted via Mobile Device

YBNORML · 10-13-2012, 12:07 AM

Quote:

Originally Posted by VA72C10

I have thought of doing this before....I like it although i'd have to still have functioning doors or my wife wouldn't ride in it

Posted via Mobile Device

Is that a good or a bad thing?

BMERDOC · 10-13-2012, 12:17 AM

Hmmm, there ARE plenty of cheap LWBs around here.... Been lookin for a reason to attempt some major fab work. I like it rough. A pair of buckets and you could use the rear gate to get in if you wanted. Again, Hmmm.

PanelDeland · 10-13-2012, 10:52 AM

BMERDOC,that's exactly what they did.It was lowered with a rear axle flip and cut coils in front(GMC with leafs).It was a big but doable step up to the bed.This one would have required a tetnus shot to drive much,but the outside was in flat Black primer.

BMERDOC · 10-14-2012, 12:32 PM

Still thinkin' real hard about it...

http://richmond.craigslist.org/cto/3263490236.html

10-11-2012, 09:22 PM	#1
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Sure enough,I forgot the camera. and saw what is probably the wildest idea for a 67-72 in a while.It was a longbed,but they cut the cab off above the windshield and at the back of the floor.Then they remved the front of the bed and trimmed the bed floor back from the front.Then they shortened the whole thing.The front of the bed was where the door hinges would normally be.It was apretty beat example of a truck but they managed to make a rat cruiser out of what they had.It was primered with a rusty floor but they were cruisin and having a blast.The tailgate was open and it had buckets so they could go between them to get in.It actually looked pretty decent except for the front of the bed doesn't exactly match the rear of the front fender. BTW it was also a GMC. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-12-2012, 10:51 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Sure enough,I forgot the camera. weird... The doors are a few feet wide, so even with a longbed, if the front of the bed was lined up with the back of the front fender... that's a heck of a short wheel base? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-12-2012, 05:21 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,260	Re: Sure enough,I forgot the camera. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-12-2012, 06:04 PM	#4
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Sure enough,I forgot the camera. there was a pic of a truck described like this posted a while ago. It was cool it was done roadster style and the lwb bed sides were pulled all the way up to the front fenders. with looked too be a shortend wheel base I think there was before and after pics of it after getting bodyworked unfortunatly i suc at searches and links __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

10-12-2012, 09:51 PM	#5
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: Sure enough,I forgot the camera. http://67-72chevytrucks.com/vboard/s...d.php?t=513079 I think this is the truck you guys are talking about. The link gives a little more info. I personally like it Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

10-12-2012, 10:45 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Sure enough,I forgot the camera. That's actually pretty damn cool! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-12-2012, 10:50 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Sure enough,I forgot the camera. Same concept except for the one I saw was a rat and built from what looked to be a junker otherwise.The wheelbase looked shorter than a Blazer but it's hard to tell without the doors.Seems like a good way to put stuff that normally wouldn't get used into something fairly cool. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-12-2012, 11:42 PM	#8
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Sure enough,I forgot the camera. That is pretty cool __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

10-12-2012, 11:49 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Sure enough,I forgot the camera. I have thought of doing this before....I like it although i'd have to still have functioning doors or my wife wouldn't ride in it Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-13-2012, 12:17 AM	#11
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Sure enough,I forgot the camera. Hmmm, there ARE plenty of cheap LWBs around here.... Been lookin for a reason to attempt some major fab work. I like it rough. A pair of buckets and you could use the rear gate to get in if you wanted. Again, Hmmm. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

10-13-2012, 10:52 AM	#12
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Sure enough,I forgot the camera. BMERDOC,that's exactly what they did.It was lowered with a rear axle flip and cut coils in front(GMC with leafs).It was a big but doable step up to the bed.This one would have required a tetnus shot to drive much,but the outside was in flat Black primer. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-14-2012, 12:32 PM	#13
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Sure enough,I forgot the camera. Still thinkin' real hard about it... http://richmond.craigslist.org/cto/3263490236.html __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.