power steering conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454C10CHEVY · 10-14-2012, 10:29 PM

Ok so i just bought a power steering box with pitman arm from a c20 will this work on my c10 i already have both a new style and old style pump that i can use i know i need the lines is there anything else i need to do the swap from manual?

Thanks
Jerry
Posted via Mobile Device

PanelDeland · 10-15-2012, 12:24 PM

You need the matching pulleys,the rest of it does you no good without them.I'm not sure but I "think" the C 10 and 20 PS boxes are the same.And the pump brackets are specific to the engine.I notice a 350,I6 and BB all in your sig.

454C10CHEVY · 10-15-2012, 12:29 PM

I have a full set of matching pulley forgot to mention those it is going on the bb. So the only other thing i would need would be the bracket than. Thanks
Posted via Mobile Device

10-14-2012, 10:29 PM	#1
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	power steering conversion Ok so i just bought a power steering box with pitman arm from a c20 will this work on my c10 i already have both a new style and old style pump that i can use i know i need the lines is there anything else i need to do the swap from manual? Thanks Jerry Posted via Mobile Device __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

10-15-2012, 12:24 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: power steering conversion You need the matching pulleys,the rest of it does you no good without them.I'm not sure but I "think" the C 10 and 20 PS boxes are the same.And the pump brackets are specific to the engine.I notice a 350,I6 and BB all in your sig. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-15-2012, 12:29 PM	#3
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: power steering conversion I have a full set of matching pulley forgot to mention those it is going on the bb. So the only other thing i would need would be the bracket than. Thanks Posted via Mobile Device __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.