Plastic grommet thingy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JORGIE95961 · 10-28-2012, 10:43 AM

I need to know where i can get the "grommet" that goes on the firewall for the ac flapper ie fresh air vent...Whats this thing officially called and who sells them..
this is not a want to buy add but i can understand why someone may take it that way.. please any infro is apprecieated

**Daddy Brim** · 10-28-2012, 10:51 AM

Are you looking for this ? https://www.classicparts.com/searchprods.asp

JORGIE95961 · 10-28-2012, 11:02 AM

Quote:

Originally Posted by Daddy Brim

Are you looking for this ? https://www.classicparts.com/searchprods.asp

i looked em up , cant find it but thanks

bowtiecharlie · 10-28-2012, 11:14 AM

I think lmc carries this in a complete seal kit try this link http://www.lmctruck.com/icatalog/cb/full.aspx?Page=118

JORGIE95961 · 10-28-2012, 11:21 AM

I bout the kit but this piece didnt come in it, or anywhere else.. just my luck

**FirstOwner69** · 10-28-2012, 12:10 PM

Are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced.

Here's a previous thread with pictures.
http://67-72chevytrucks.com/vboard/s...63#post5397163

JORGIE95961 · 10-28-2012, 12:33 PM

Quote:

Originally Posted by firstowner69

are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced.

Here's a previuous thread with pictures.
http://67-72chevytrucks.com/vboard/s...63#post5397163

yes!!

**FirstOwner69** · 10-28-2012, 12:41 PM

There were some trucks in my local junkyard with A/C. However, they have been pretty much picked over. I can look if you'd like. They'd probably give one to me at no cost, and I could pass those "savings" on to you.

JORGIE95961 · 10-28-2012, 12:56 PM

That would be super awesome!! as always wheter you get it or not the "awesomeness" gets passed on!!

**FirstOwner69** · 10-28-2012, 01:05 PM

I'll try to get out there tomorrow to take a look.

rsavage · 10-28-2012, 07:20 PM

Post a WTB ad. There are lots of guys on here that part trucks. I am sure someone will have it for you.

**FirstOwner69** · 10-30-2012, 11:59 PM

Quote:

Originally Posted by JORGIE95961

That would be super awesome!! as always wheter you get it or not the "awesomeness" gets passed on!!

There was one in the junkyard. It was brittle and broke as I was removing it. Sorry I couldn't help.

Jim

JORGIE95961 · 10-31-2012, 12:27 AM

Quote:

Originally Posted by FirstOwner69

There was one in the junkyard. It was brittle and broke as I was removing it. Sorry I couldn't help.

Jim

Thank yo umuch sir, you helped a great deal

chewychevy67 · 10-31-2012, 12:38 AM

I may have one you can have. It would be at the shop. Ill be there tomorrow sometime so ill check.

chewychevy67 · 11-01-2012, 05:05 PM

Is this what your looking for? If so PM me your mail address and ill mail it to you. Rod.

JORGIE95961 · 11-01-2012, 05:20 PM

THATS IT .. BUT am i alwed to accept this?

10-28-2012, 10:43 AM	#1
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Plastic grommet thingy I need to know where i can get the "grommet" that goes on the firewall for the ac flapper ie fresh air vent...Whats this thing officially called and who sells them.. this is not a want to buy add but i can understand why someone may take it that way.. please any infro is apprecieated

10-28-2012, 10:51 AM	#2
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: Plastic grommet thingy Are you looking for this ? https://www.classicparts.com/searchprods.asp __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2.

10-28-2012, 11:14 AM	#4
bowtiecharlie Registered User Join Date: Jan 2012 Location: quinton,nj Posts: 28	Re: Plastic grommet thingy I think lmc carries this in a complete seal kit try this link http://www.lmctruck.com/icatalog/cb/full.aspx?Page=118 __________________

10-28-2012, 11:21 AM	#5
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Plastic grommet thingy I bout the kit but this piece didnt come in it, or anywhere else.. just my luck

10-28-2012, 12:10 PM	#6
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,844	Re: Plastic grommet thingy Are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced. Here's a previous thread with pictures. http://67-72chevytrucks.com/vboard/s...63#post5397163 Last edited by FirstOwner69; 10-28-2012 at 12:37 PM.

10-28-2012, 12:41 PM	#8
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,844	Re: Plastic grommet thingy There were some trucks in my local junkyard with A/C. However, they have been pretty much picked over. I can look if you'd like. They'd probably give one to me at no cost, and I could pass those "savings" on to you.

10-28-2012, 12:56 PM	#9
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Plastic grommet thingy That would be super awesome!! as always wheter you get it or not the "awesomeness" gets passed on!!

10-28-2012, 01:05 PM	#10
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,844	Re: Plastic grommet thingy I'll try to get out there tomorrow to take a look.

10-28-2012, 07:20 PM	#11
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Plastic grommet thingy Post a WTB ad. There are lots of guys on here that part trucks. I am sure someone will have it for you. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

10-31-2012, 12:38 AM	#14
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,484	Re: Plastic grommet thingy I may have one you can have. It would be at the shop. Ill be there tomorrow sometime so ill check.

11-01-2012, 05:05 PM	#15
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,484	Re: Plastic grommet thingy Is this what your looking for? If so PM me your mail address and ill mail it to you. Rod. Attached Images

11-01-2012, 05:20 PM	#16
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Plastic grommet thingy THATS IT .. BUT am i alwed to accept this?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.