OH Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7T2 · 10-30-2012, 10:45 AM

I have a complete Air Ride Technologies suspension setup for sale, almost everything you would need to do an install except air line. It is the original Air Ride Technologies RidePro setup with controller and two remotes, Bigred valve block that is 3/8 but has 1/4 fittings to slow it down a bit. The brackets are for a 67-72 chevy truck, but I believe will fit others like 73-87.

Here is what is included in the purchase price:

ART Ridepro electronic controller with two remotes
ART Bigred valve block
ART Viar 400C compressor
ART Air tank - 34" long by 8" wide with brackets (7" diameter tank)
ART Rear Air OverLeaf brackets for use with leaf springs (not needed with coil springs)
Suicidedoors front A-arm bag mounting plates
Choice of 4 bags - have 4 Airlift 5813 and 2 Airlift 5815 (4 5813 for normal application)
Airlift Tank Gauge

All parts have between 1000-1500 road miles on them. Never had any problems when it was installed.

Asking $1500 firm for everything. Local pickup in central Ohio, or figure $100 for shipping in the US 48 states. I will refund the difference if it is less, or eat the extra cost if it is more.

Email toesliderATmailshack.com if interested, or PM here.

7T2 · 10-30-2012, 10:47 AM

More pics:

Sammy · 10-30-2012, 11:23 AM

If you decide to split this up I would be interested in the valve block, wiring and controls. Maybe even the tank if it is 5 gallon if it is priced right. Thanks. And I understand your wanting to sell as a complete package deal but sometimes splitting it up works other times it don't.

7T2 · 11-05-2012, 09:20 PM

Have had some interest in individual parts, so I'm going to post individual prices too.

Controller with 2 remotes $475, BigRed Valve block, $475. Would prefer to sell both together as a set, would do $850 for the set. *SOLD*

Other components:

Airlift 5815 bags, $50 each, $90 pair
Airlift 5813 bags, *SOLD*
Viair 400C Compressor, *SOLD*
Air Overleaf bracket set, $50 set (have 2)
Front Suicidedoors Brackets, *SOLD*
Tank, $50
Air Lift Tank gauge, $40

All prices are without shipping.

7T2 · 11-08-2012, 11:37 AM

I'll throw this out there as well, for Central Ohio people. I would also trade any or all of this for either a flat screen TV in the 55"-65" range, or an Apple iPad with 3G. Not interested in one with only WiFi. Let me know what you have. I also have an 18" and 20" set of the Centerline Smoothies available, with tires for trade or sale.

dbcampbell3 · 11-08-2012, 03:42 PM

Do you still have the pump, tank and tank gauge?

Chance1125 · 11-08-2012, 05:21 PM

Can this set up be used on a 69 Sub 1/2 ton?

carwhore · 11-08-2012, 06:34 PM

can the new e-level system be used with this?

7T2 · 11-08-2012, 07:34 PM

Quote:

Originally Posted by dbcampbell3

Do you still have the pump, tank and tank gauge?

Yes, everything is still currently available.

Quote:

Originally Posted by Chance1125

Can this set up be used on a 69 Sub 1/2 ton?

I don't see why not. The front brackets should work with stock A-arms, and in the rear you would use either the air overleaf brackets or none at all, depending on whether or not you have leaf springs or coils.

Quote:

Originally Posted by carwhore

can the new e-level system be used with this?

The valves should plug directly into that controller, I think. If you're asking if the controller will work with their newer systems that feature mechanical level sensors, I don't think so.

Street Smart · 11-08-2012, 08:39 PM

Pm`ed you a pic of an Ipad 2. Let me know, Thanks Charlie

ecgate · 11-08-2012, 08:57 PM

How about a pick of your 18" and 20" smoothies?

7T2 · 11-09-2012, 12:11 AM

Quote:

Originally Posted by ecgate

How about a pick of your 18" and 20" smoothies?

It's coming...need to get them out of the loft and take a few pics. They are in decent shape, but have a few scratches where hupcaps came in contact with them. Tires are like new Kumho Ecstas.

7T2 · 11-10-2012, 09:57 PM

Controller, valves, front brackets, pump and the 4 5813 bags are all spoken for, rest is still up for grabs...

jeffg1010 · 11-11-2012, 10:45 AM

Where are the smoothies listed?
Posted via Mobile Device

7T2 · 11-11-2012, 11:03 AM

Haven't had time to photograph and list the smoothies yet. I want people to be able to see the flaws on them.
Posted via Mobile Device

jeffg1010 · 11-11-2012, 01:33 PM

Ok, im not jumping in line in front of ecgate, but please let me know when you post them as I'd like to get in line.

Very interested in pics. A few scratches doesn't bother me as I am powder coating them
Posted via Mobile Device

dbcampbell3 · 11-12-2012, 09:21 AM

I would like to purchase the pump, tank and gauge. Do you except paypal? If so let me know how much everything will be with the shipping to
Unicoi, Tennessee 37692 and I'll pay you.

7T2 · 11-12-2012, 03:07 PM

Quote:

Originally Posted by dbcampbell3

I would like to purchase the pump, tank and gauge. Do you except paypal? If so let me know how much everything will be with the shipping to
Unicoi, Tennessee 37692 and I'll pay you.

PM sent.

Street Smart · 11-15-2012, 01:45 PM

"Box O`parts" showed up today, THANKS again, Charlie.

7T2 · 11-16-2012, 08:32 PM

Only things left are the 5815 bags (2), the tank, and the Air Overleaf brackets (2 sets, 1 set required for a pair of bags). everything else is sold. Thanks!

7T2 · 01-12-2013, 02:20 PM

Quote:

Originally Posted by jeffg1010

Where are the smoothies listed?
Posted via Mobile Device

Smoothies are now listed in the marketplace:

http://67-72chevytrucks.com/vboard/c...p?product=6894

If the Air Ride parts dont say SOLD next to them, they are still available.

bowtiebubba · 01-13-2013, 09:32 AM

I'm interested in both sets of air over leaf brackets. Wish you still had the bags. Pm me a shipping quote to 64804.
Posted via Mobile Device

10-30-2012, 10:45 AM	#1
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred I have a complete Air Ride Technologies suspension setup for sale, almost everything you would need to do an install except air line. It is the original Air Ride Technologies RidePro setup with controller and two remotes, Bigred valve block that is 3/8 but has 1/4 fittings to slow it down a bit. The brackets are for a 67-72 chevy truck, but I believe will fit others like 73-87. Here is what is included in the purchase price: ART Ridepro electronic controller with two remotes ART Bigred valve block ART Viar 400C compressor ART Air tank - 34" long by 8" wide with brackets (7" diameter tank) ART Rear Air OverLeaf brackets for use with leaf springs (not needed with coil springs) Suicidedoors front A-arm bag mounting plates Choice of 4 bags - have 4 Airlift 5813 and 2 Airlift 5815 (4 5813 for normal application) Airlift Tank Gauge All parts have between 1000-1500 road miles on them. Never had any problems when it was installed. Asking $1500 firm for everything. Local pickup in central Ohio, or figure $100 for shipping in the US 48 states. I will refund the difference if it is less, or eat the extra cost if it is more. Email toesliderATmailshack.com if interested, or PM here. Attached Images __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

10-30-2012, 10:47 AM	#2
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred More pics: Attached Images __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD Last edited by 7T2; 10-30-2012 at 10:55 AM.

10-30-2012, 11:23 AM	#3
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred If you decide to split this up I would be interested in the valve block, wiring and controls. Maybe even the tank if it is 5 gallon if it is priced right. Thanks. And I understand your wanting to sell as a complete package deal but sometimes splitting it up works other times it don't. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

11-05-2012, 09:20 PM	#4
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Have had some interest in individual parts, so I'm going to post individual prices too. Controller with 2 remotes $475, BigRed Valve block, $475. Would prefer to sell both together as a set, would do $850 for the set. SOLD Other components: Airlift 5815 bags, $50 each, $90 pair Airlift 5813 bags, SOLD Viair 400C Compressor, SOLD Air Overleaf bracket set, $50 set (have 2) Front Suicidedoors Brackets, SOLD Tank, $50 Air Lift Tank gauge, $40 All prices are without shipping. __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD Last edited by 7T2; 11-15-2012 at 09:36 AM.

11-08-2012, 11:37 AM	#5
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred I'll throw this out there as well, for Central Ohio people. I would also trade any or all of this for either a flat screen TV in the 55"-65" range, or an Apple iPad with 3G. Not interested in one with only WiFi. Let me know what you have. I also have an 18" and 20" set of the Centerline Smoothies available, with tires for trade or sale. __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

11-08-2012, 03:42 PM	#6
dbcampbell3 Registered User Join Date: Oct 2012 Location: Unicoi, Tennessee Posts: 59	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Do you still have the pump, tank and tank gauge?

11-08-2012, 05:21 PM	#7
Chance1125 Registered User Join Date: Oct 2012 Location: Woodstock, GA Posts: 52	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Can this set up be used on a 69 Sub 1/2 ton? __________________ Chance "Old Yeller" 1969 C10 Suburban driver "Last Chance" 1930 A-Model Coupe w/348 Chevy project 1932 Ford Tudor Sedan project 1957 Harley Bobber Project Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=554807

11-08-2012, 06:34 PM	#8
carwhore Registered User Join Date: Oct 2012 Location: Columbus, OH Posts: 53	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred can the new e-level system be used with this? __________________ http://i87.photobucket.com/albums/k1...psb1aa35bb.jpg

11-08-2012, 08:39 PM	#10
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Pm`ed you a pic of an Ipad 2. Let me know, Thanks Charlie __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

11-08-2012, 08:57 PM	#11
ecgate Registered User Join Date: Aug 2012 Location: Council Bluffs, Iowa Posts: 280	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred How about a pick of your 18" and 20" smoothies?

11-10-2012, 09:57 PM	#13
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Controller, valves, front brackets, pump and the 4 5813 bags are all spoken for, rest is still up for grabs... __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD Last edited by 7T2; 11-15-2012 at 09:37 AM.

11-11-2012, 10:45 AM	#14
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Where are the smoothies listed? Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

11-11-2012, 11:03 AM	#15
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Haven't had time to photograph and list the smoothies yet. I want people to be able to see the flaws on them. Posted via Mobile Device __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

11-11-2012, 01:33 PM	#16
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Ok, im not jumping in line in front of ecgate, but please let me know when you post them as I'd like to get in line. Very interested in pics. A few scratches doesn't bother me as I am powder coating them Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

11-12-2012, 09:21 AM	#17
dbcampbell3 Registered User Join Date: Oct 2012 Location: Unicoi, Tennessee Posts: 59	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred I would like to purchase the pump, tank and gauge. Do you except paypal? If so let me know how much everything will be with the shipping to Unicoi, Tennessee 37692 and I'll pay you.



Register or Log In To remove these advertisements.

11-15-2012, 01:45 PM	#19
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred "Box O`parts" showed up today, THANKS again, Charlie. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

11-16-2012, 08:32 PM	#20
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred Only things left are the 5815 bags (2), the tank, and the Air Overleaf brackets (2 sets, 1 set required for a pair of bags). everything else is sold. Thanks! __________________ 1957 GMC Ambulance 1962 Belair Wagon 1963 C80 Truck Cab FOR SALE 1969 Chevy C10 Short Bed 1972 Chevy C10 Long Bed SOLD 1996 C3500 Dually SOLD

01-13-2013, 09:32 AM	#22
bowtiebubba Registered User Join Date: Jun 2008 Location: joplin mo Posts: 37	Re: Full Air Ride Technologies setup - 67-72 or other application - Ridepro/Bigred I'm interested in both sets of air over leaf brackets. Wish you still had the bags. Pm me a shipping quote to 64804. Posted via Mobile Device

Register or Log In To remove these advertisements.