WI Ididit Chrome steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grwnded71 · 11-04-2012, 02:40 PM

Trying to drum up some cash...nice column, Im going with a stock tilt. $350.00 shipped cont. U.S. will package up in pvc tube.

Column shift, Tilt. Came with current project truck, was mounted in cab but never to gearbox/steering shaft.
Has a scratch from mounting, will sit under dash, cannot be seen when mounted. Also P.O. cut wire harness...my guess is he was going to hard wire it for some reason? Sorry, I do not have the connector that was cut off. Has neutral switch mounted on column. I do not have the hazard knob.

grwnded71 · 11-15-2012, 10:43 PM

alright, alright...maybe i was alittle high on price, alittle research shows these go for up to 900? So new price of $350.00 shipped, other wise I will just keep it. Will trade for a complete interior, OEM and must be nice....Black Deluxe(1970)

LEX · 11-15-2012, 11:21 PM

Maybe an obvious answer, but I'm not sure. How can I get that harness to work? Do I have to splice everything up or do I just replace the whole thing? Is the hazard button available through ididit or can i use a stock one? There happen to be a part # anywhere on it?
If anyone else can answer, shoot!
Thanks

capt68 · 11-16-2012, 12:20 AM

I'd like to buy it but want to confirm that it will work in a '68 Chevy p/u. If so, I'll take it. Do you have a part number?

Russell

Quote:

Originally Posted by grwnded71

Trying to drum up some cash...nice column, Im going with a stock tilt. $350.00 shipped cont. U.S. will package up in pvc tube.

Column shift, Tilt. Came with current project truck, was mounted in cab but never to gearbox/steering shaft.
Has a scratch from mounting, will sit under dash, cannot be seen when mounted. Also P.O. cut wire harness...my guess is he was going to hard wire it for some reason? Sorry, I do not have the connector that was cut off. Has neutral switch mounted on column. I do not have the hazard knob.

grwnded71 · 11-16-2012, 11:38 AM

pretty sure i have the instruction sheet and papers with it...will post it up tonight after work.

capt68 · 11-17-2012, 11:16 AM

PM sent.

Quote:

Originally Posted by grwnded71

pretty sure i have the instruction sheet and papers with it...will post it up tonight after work.

grwnded71 · 11-17-2012, 12:29 PM

found the connector, wires cut very very short...too short to solder/splice back together. would have to get new terminal ends to go into connector.

only found one sheet to go with, Its a how to install levers and syncing the column instruction sheet.

No part numbers on it though. This column is for our trucks, i guarantee it.
The part # as found on the ididit website is 1140657020.

http://www.ididitinc.com/retrofit_co...ck_CS.html#pns

*May have to hold of on selling this one fellas, I forgot I might have promised it a while back in some trading deals with another member that we have yet to finalize any deals.

capt68 · 11-17-2012, 12:42 PM

I guess by the rules of this forum, "LEX" is ahead of me for buying this. If he doesn't want it and your other promise falls through, I'll take it. Let me know ASAP. I'm ready to buy.

Russell

Quote:

Originally Posted by grwnded71

found the connector, wires cut very very short...too short to solder/splice back together. would have to get new terminal ends to go into connector.

only found one sheet to go with, Its a how to install levers and syncing the column instruction sheet.

No part numbers on it though. This column is for our trucks, i guarantee it.
The part # as found on the ididit website is 1140657020.

http://www.ididitinc.com/retrofit_co...ck_CS.html#pns

*May have to hold of on selling this one fellas, I forgot I might have promised it a while back in some trading deals with another member that we have yet to finalize any deals.

LEX · 11-17-2012, 12:51 PM

I appreciate it capt68, but I'm going to pass at this time.

capt68 · 11-17-2012, 12:59 PM

No problem. I didn't want to give the impression that I was trying to cut in line.

Russell

Quote:

Originally Posted by LEX

I appreciate it capt68, but I'm going to pass at this time.

grwnded71 · 11-17-2012, 05:27 PM

Thanks for understanding guys. Will let you know as soon as I have all this figured out. also, after closer inspection, lol...the hazard knob is there in the package with the levers.

chevytruckluver · 11-18-2012, 12:10 AM

Another interested buyer, if it gets to me

chevydog66 · 11-18-2012, 11:25 PM

Also interested if it gets to me.

grwnded71 · 03-08-2013, 10:56 PM

Column is sold. Admin please remove ad. Thanks all for your interest!

11-04-2012, 02:40 PM	#1
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Ididit Chrome steering column Trying to drum up some cash...nice column, Im going with a stock tilt. $350.00 shipped cont. U.S. will package up in pvc tube. Column shift, Tilt. Came with current project truck, was mounted in cab but never to gearbox/steering shaft. Has a scratch from mounting, will sit under dash, cannot be seen when mounted. Also P.O. cut wire harness...my guess is he was going to hard wire it for some reason? Sorry, I do not have the connector that was cut off. Has neutral switch mounted on column. I do not have the hazard knob. Attached Images __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold Last edited by grwnded71; 11-15-2012 at 10:45 PM. Reason: price change

11-15-2012, 10:43 PM	#2
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Ididit Chrome steering column alright, alright...maybe i was alittle high on price, alittle research shows these go for up to 900? So new price of $350.00 shipped, other wise I will just keep it. Will trade for a complete interior, OEM and must be nice....Black Deluxe(1970) __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

11-15-2012, 11:21 PM	#3
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: Ididit Chrome steering column Maybe an obvious answer, but I'm not sure. How can I get that harness to work? Do I have to splice everything up or do I just replace the whole thing? Is the hazard button available through ididit or can i use a stock one? There happen to be a part # anywhere on it? If anyone else can answer, shoot! Thanks Last edited by LEX; 11-15-2012 at 11:48 PM.

11-16-2012, 11:38 AM	#5
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Ididit Chrome steering column pretty sure i have the instruction sheet and papers with it...will post it up tonight after work. __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

11-17-2012, 12:29 PM	#7
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Ididit Chrome steering column found the connector, wires cut very very short...too short to solder/splice back together. would have to get new terminal ends to go into connector. only found one sheet to go with, Its a how to install levers and syncing the column instruction sheet. No part numbers on it though. This column is for our trucks, i guarantee it. The part # as found on the ididit website is 1140657020. http://www.ididitinc.com/retrofit_co...ck_CS.html#pns *May have to hold of on selling this one fellas, I forgot I might have promised it a while back in some trading deals with another member that we have yet to finalize any deals. Attached Images __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

11-17-2012, 12:51 PM	#9
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: Ididit Chrome steering column I appreciate it capt68, but I'm going to pass at this time.

11-17-2012, 05:27 PM	#11
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Ididit Chrome steering column Thanks for understanding guys. Will let you know as soon as I have all this figured out. also, after closer inspection, lol...the hazard knob is there in the package with the levers. __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold Last edited by grwnded71; 11-17-2012 at 05:46 PM. Reason: hazard knob found lol

11-18-2012, 12:10 AM	#12
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Ididit Chrome steering column Another interested buyer, if it gets to me __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

11-18-2012, 11:25 PM	#13
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Ididit Chrome steering column Also interested if it gets to me. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

03-08-2013, 10:56 PM	#14
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Ididit Chrome steering column Column is sold. Admin please remove ad. Thanks all for your interest! __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.