|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-21-2012, 01:40 AM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Finally 67 SS wheel done! Pics
Man this has taken me all day just about. I started at 3PM and just walked in the house at 12 midnight! It was a long process but it's in and working great. I ran into a little problem on the install and ended up tearing my whole wiring out of the thing just about.
 Well I unplug the horn so I could get everything hooked up without blowing it every second I touched it. So I get everything done hook the ground backup and nothing....Dang! So I pull everything back off and double check it... everything seems OK. So I put it all back and nothing again. WTH... so I go and look at the horns them selves. They look good so I get my test light out and no power to the relay... They worked the last time I used them so I start looking. I looked under the dash under the hood and nothing seemed wrong. I have all the relays under my cold air intake so that all had to come out to get to them. So while I'm trying to figure this out I decide to try the head lights since they all feed off the same main power wire. I finally checked the headlights.... dang no lights either! What the heck is going on here. So I finally traced it out and had put a 20amp fuse in line with the hot wire suppying my relays! Guess what, it was blowed!!  So I get the 20 amp fuse out and replace it with a new one. I'm hooking the relays back up and what do I do. I touched 2 of the wires and pop fuse blows again! Now I have a 30amp supplying the relays and everything is working and it's finally installed. Sorry for such a long post but man it was driving me crazy trying to figure it out. Anyway here you go.    I'll get a video of the chevy horns tomorrow. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
11-21-2012, 01:53 AM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: San Jose, California
Posts: 784
|
Re: Finally 67 SS wheel done! Pics
Wow. Wow.
|
|
|
|
|
11-21-2012, 07:52 AM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
|
Re: Finally 67 SS wheel done! Pics
very nice
|
|
|
|
|
11-21-2012, 07:59 AM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
It turned out pretty good I think. I'm not a painter that's something I have learned over the past years. But for painting it outside I think it came out fine. Man it's a big wheel! Lol but I like it.
Now to find a nice leather cover for it. Anybody have a suggestion on a place to get one. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-21-2012, 08:52 AM
|
#5 |
|
Registered User
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
|
Re: Finally 67 SS wheel done! Pics
great job andy that looks classy, I bought a steering wheel wrap at the dollar store awhile back not sure if they still have them but I also seen them at ollies if you have that store around It was the kind that has the long plastic/pcv string that goes around and around and around they were popular in the 70-80s I put it in my pontiac cause it just looked right
__________________
81 camaro 355 4/spd 342 posi my first love  .67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover. |
|
|
|
|
11-21-2012, 09:25 AM
|
#6 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Thanks midniteblues,
That's what I had on the Corvette wheel. I'm going to look for a differant style this time. I have no idea if there is any differant styles but I'm going to look around.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-21-2012, 09:28 AM
|
#7 |
|
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,777
|
Re: Finally 67 SS wheel done! Pics
That turned out great.
|
|
|
|
|
11-21-2012, 09:39 AM
|
#8 |
|
Registered User
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
|
Re: Finally 67 SS wheel done! Pics
when I went looking it was tough too find anything that didnt have a ed hardy logo on it
a stitched leather wrap would look good on there
__________________
81 camaro 355 4/spd 342 posi my first love .67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover. |
|
|
|
|
11-21-2012, 12:04 PM
|
#9 |
|
Registered User
Join Date: Dec 2002
Location: St. Louis, MO
Posts: 118
|
Re: Finally 67 SS wheel done! Pics
NAPA carries a wheel cover similar to the one shown above in a larger size for our "big ole wheels. It was in their online catalog a few months ago.
Posted via Mobile Device
__________________
1971 C10 SWB 350/350 A/C PS PDB |
|
|
|
|
11-21-2012, 01:59 PM
|
#10 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: Finally 67 SS wheel done! Pics
New wheel looks great congrats on getting the horns all figured out..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
11-21-2012, 03:28 PM
|
#11 |
|
Registered User
Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Finally 67 SS wheel done! Pics
Other than blowing your fuse was a just a straight swap.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
|
|
|
|
11-21-2012, 04:00 PM
|
#12 |
|
67cheby
 
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Finally 67 SS wheel done! Pics
nice work
|
|
|
|
|
11-21-2012, 04:14 PM
|
#13 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Quote:
Thanks everyone the video will be next. Better have you ear plugs handy!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
11-21-2012, 04:33 PM
|
#14 |
|
///Relaxed Atmosphere
Join Date: May 2010
Location: Houston,Tx
Posts: 1,266
|
Re: Finally 67 SS wheel done! Pics
looks good
__________________
71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab |
|
|
|
|
11-21-2012, 09:48 PM
|
#15 |
|
Registered User
Join Date: Mar 2009
Location: independence mo
Posts: 2,111
|
Re: Finally 67 SS wheel done! Pics
That came out really good.
__________________
I'm not as good as I once was, But I'm as good once as I ever was. |
|
|
|
|
11-21-2012, 09:59 PM
|
#16 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: Finally 67 SS wheel done! Pics
That's looks awesome. So what size wheel is it?
Posted via Mobile Device
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" 
|
|
|
|
|
11-21-2012, 10:59 PM
|
#17 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Quote:
Here is a video of the horn.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
11-22-2012, 07:45 AM
|
#18 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Finally 67 SS wheel done! Pics
That looks great! I'm a fan of car wheels in trucks. Many don't realize but the factory truck wheels are no bigger than most car wheels from back then,either. People must have started getting fatter in the '70s
. I've used those vinyl leather-look covers with the holes. I have one on my '72 that's been on that wheel since the '80s. Since wheels got fatter and cushioned you don't see these as available as years ago. But,at one time I had a leather cover and it had no holes. The lace was hidden,too. Hopefully someone still makes those.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
11-22-2012, 09:13 AM
|
#19 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Quote:
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
11-23-2012, 01:53 PM
|
#20 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Does anybody have a link are info on nice leather wheel covers?
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-23-2012, 10:19 PM
|
#21 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: Finally 67 SS wheel done! Pics
Looking good, Andy!
__________________
|
|
|
|
|
11-23-2012, 10:25 PM
|
#22 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Quote:
I'm going to have all my little things done by the end of the year I hope then all the major stuff done afterwards so it will be ready for Texas in June.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
11-23-2012, 10:59 PM
|
#23 |
|
Registered User
Join Date: Sep 2012
Location: Queen Creek, AZ
Posts: 551
|
Re: Finally 67 SS wheel done! Pics
Man that turned out sweet bud! Great job, you put the work and time into it and its nice to see the end result!
Weev- Posted via Mobile Device
__________________
Weev- Life's tough...... It's even tougher when your stupid - John Wayne |
|
|
|
|
11-23-2012, 11:09 PM
|
#24 |
|
Registered User
Join Date: Aug 2012
Location: post falls idaho
Posts: 6
|
Re: Finally 67 SS wheel done! Pics
If you live in a town with a class 8 (ie.peterbilt,kenworth) dealer,go see the counterman and order a leather cover for a 16 in.wheel, you have several colors available.They are great looking ,they take a while to sew onto your wheel but is well worth it! sorry i don't remember the brand name. i have done 4 of these and I highly fecommend them @50$
|
|
|
|
|
11-23-2012, 11:10 PM
|
#25 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Finally 67 SS wheel done! Pics
Quote:
I drove it to work tonight. it going to take a while to get use to that big O wheel again! Lol... No problem seeing the guages now that's for sure!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
