Porterbuilt compressor / tank mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jtp67-72 · 12-16-2012, 10:19 PM

Just got these from Nate...Know some of you have been lookin for these...setup for 3 gal tank and compressor in Accuair setup......jim

belowme51 · 12-18-2012, 11:25 AM

will these work with the exo brackets also?

72BlckButy · 12-18-2012, 01:01 PM

Is there an off the truck w/ compressor tank installed pic? If that made sense. haha!

**lolife99** · 12-18-2012, 01:14 PM

Quote:

Originally Posted by 72BlckButy

Is there an off the truck w/ compressor tank installed pic? If that made sense. haha!

Here's an "installed" pic from Old Aux, with a 3 gallon tank,...

higXtech · 12-18-2012, 01:53 PM

that is really slick

Gus350 · 12-18-2012, 02:41 PM

Any info on Pricing for these

AVS_JASON · 12-18-2012, 02:45 PM

Beautiful Tank...

72BlckButy · 12-18-2012, 04:35 PM

Quote:

Originally Posted by lolife99

Here's an "installed" pic from Old Aux, with a 3 gallon tank,...

Thanks Keith. Do you know does that tank run a drain?

jtp67-72 · 12-18-2012, 08:45 PM

I should have my accuair stuff in this week....will look for drain hole....mine were packaged price but I think less than $150....Maybe Nate or Dave will chime in.....thanx for picture Keith.....was trying to get that pic on here.............jim

ihssalky · 12-18-2012, 09:46 PM

I just ordered my accuair setup thru dave. It is basically the same money either way because the brackets are 75 ea and the extra tank was close to 100. Total aprox 250. Same as exo mount price but with their 10% off on accuair it could possibly be a few bucks cheaper with exo. All it comes down to is which works for u. I was out there recently and it looks like they did that because of running out of room on that truck.
Posted via Mobile Device

jtp67-72 · 12-18-2012, 09:54 PM

I agree....just which way U want to go.....these also come with about $30 worth of grade 8 hardware!!.............jim

70blackfish · 01-11-2013, 01:00 AM

i looked on PB website for these, could NOT find them.......

I wonder how big there Company would be With a better website....

how much do they cost????

PBFAB.COM · 01-11-2013, 11:51 AM

Quote:

Originally Posted by 70blackfish

i looked on PB website for these, could NOT find them.......

I wonder how big there Company would be With a better website....

how much do they cost????

$150 for the pair.

We don't want to be the biggest... just the best!

Nate

PBFAB.COM · 01-11-2013, 02:40 PM

Quote:

Originally Posted by belowme51

will these work with the exo brackets also?

Nope. This are not compatible with the EXO mounts.

Twisted78SS · 01-11-2013, 03:29 PM

Nate,

Can you tell me the distance between the mounting holes for the tank?

I believe I have a 5 gallon and wonder if I can make it work.

Thanks!

PBFAB.COM · 01-11-2013, 03:34 PM

Quote:

Originally Posted by Twisted78SS

Nate,

Can you tell me the distance between the mounting holes for the tank?

I believe I have a 5 gallon and wonder if I can make it work.

Thanks!

Right at 9.5". What spread do you have?

Twisted78SS · 01-11-2013, 03:39 PM

Nate,
I won't know until I get home this evening, but thank you for the quick response.
I'm pretty sure (using eyeball differentiation mathematics) that it's the same or very close.

I'll post what I have tonight.

70blackfish · 01-11-2013, 03:40 PM

Nate, you guys are one of the best. Avs
Has a nice website.
Posted via Mobile Device

Bennett68C10 · 01-11-2013, 04:34 PM

These brackets look awesome, just another Porterbuilt part I will have to put on my wishlist. Thanks Nate

Posted via Mobile Device

Twisted78SS · 01-12-2013, 06:33 PM

Quote:

Originally Posted by Porterbuilt Street Rods

Right at 9.5". What spread do you have?

Turns out I have a couple with a 9.5 spread as well.. I'll be sending you a pm soon,

thanks!

Zoomin · 01-12-2013, 10:51 PM

It may not be obvious looking at the pix, but there is a left side box and a right side box. If you order just one be sure to specify which one you want.
Posted via Mobile Device

ItMightScrape · 02-08-2013, 03:28 AM

Quote:

Originally Posted by lolife99

Here's an "installed" pic from Old Aux, with a 3 gallon tank,...

What tank is this?

Pro Performance · 02-08-2013, 11:13 AM

Not exactly sure on the manufacturer, but an aluminum 3-gallon. I have 1 set of the brackets left in stock, and I have the tanks in stock as well in black.

- Travis

**lolife99** · 02-08-2013, 01:19 PM

I plan to run a pair of RideTech 3-gallon tanks,... because I already have them.
I will have to make them work, since they are on 16.926" centers.
http://www.ridetech.com/store/air-ta...-1-8-port.html

**lolife99** · 02-08-2013, 01:22 PM

RideTech does have a 2 gallon tank also,...
http://www.ridetech.com/store/air-ta...-1-8-port.html

12-16-2012, 10:19 PM	#1
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Porterbuilt compressor / tank mounts Just got these from Nate...Know some of you have been lookin for these...setup for 3 gal tank and compressor in Accuair setup......jim Attached Images __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

12-18-2012, 11:25 AM	#2
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: Porterbuilt compressor / tank mounts will these work with the exo brackets also?

12-18-2012, 01:01 PM	#3
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Porterbuilt compressor / tank mounts Is there an off the truck w/ compressor tank installed pic? If that made sense. haha! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-18-2012, 01:53 PM	#5
higXtech Registered User Join Date: Sep 2012 Location: Leesburg VA Posts: 85	Re: Porterbuilt compressor / tank mounts that is really slick __________________ -- 1968 fleetside - nolimit wide ride front and rear + ridetech

12-18-2012, 02:41 PM	#6
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: Porterbuilt compressor / tank mounts Any info on Pricing for these __________________ Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326#

12-18-2012, 02:45 PM	#7
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: Porterbuilt compressor / tank mounts Beautiful Tank...

12-18-2012, 08:45 PM	#9
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Porterbuilt compressor / tank mounts I should have my accuair stuff in this week....will look for drain hole....mine were packaged price but I think less than $150....Maybe Nate or Dave will chime in.....thanx for picture Keith.....was trying to get that pic on here.............jim __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

12-18-2012, 09:46 PM	#10
ihssalky Registered User Join Date: Sep 2012 Location: washington pa Posts: 217	Re: Porterbuilt compressor / tank mounts I just ordered my accuair setup thru dave. It is basically the same money either way because the brackets are 75 ea and the extra tank was close to 100. Total aprox 250. Same as exo mount price but with their 10% off on accuair it could possibly be a few bucks cheaper with exo. All it comes down to is which works for u. I was out there recently and it looks like they did that because of running out of room on that truck. Posted via Mobile Device

12-18-2012, 09:54 PM	#11
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Porterbuilt compressor / tank mounts I agree....just which way U want to go.....these also come with about $30 worth of grade 8 hardware!!.............jim __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

01-11-2013, 01:00 AM	#12
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Porterbuilt compressor / tank mounts i looked on PB website for these, could NOT find them....... I wonder how big there Company would be With a better website.... how much do they cost???? __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

01-11-2013, 03:29 PM	#15
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Porterbuilt compressor / tank mounts Nate, Can you tell me the distance between the mounting holes for the tank? I believe I have a 5 gallon and wonder if I can make it work. Thanks! __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

01-11-2013, 03:39 PM	#17
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Porterbuilt compressor / tank mounts Nate, I won't know until I get home this evening, but thank you for the quick response. I'm pretty sure (using eyeball differentiation mathematics) that it's the same or very close. I'll post what I have tonight. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

01-11-2013, 03:40 PM	#18
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Porterbuilt compressor / tank mounts Nate, you guys are one of the best. Avs Has a nice website. Posted via Mobile Device __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

01-11-2013, 04:34 PM	#19
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Porterbuilt compressor / tank mounts These brackets look awesome, just another Porterbuilt part I will have to put on my wishlist. Thanks Nate Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-12-2013, 10:51 PM	#21
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Porterbuilt compressor / tank mounts It may not be obvious looking at the pix, but there is a left side box and a right side box. If you order just one be sure to specify which one you want. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro



Register or Log In To remove these advertisements.

02-08-2013, 11:13 AM	#23
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Porterbuilt compressor / tank mounts Not exactly sure on the manufacturer, but an aluminum 3-gallon. I have 1 set of the brackets left in stock, and I have the tanks in stock as well in black. - Travis

02-08-2013, 01:19 PM	#24
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt compressor / tank mounts I plan to run a pair of RideTech 3-gallon tanks,... because I already have them. I will have to make them work, since they are on 16.926" centers. http://www.ridetech.com/store/air-ta...-1-8-port.html Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-08-2013, 01:22 PM	#25
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt compressor / tank mounts RideTech does have a 2 gallon tank also,... http://www.ridetech.com/store/air-ta...-1-8-port.html Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Register or Log In To remove these advertisements.