AL wtb 250 inline six parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mrdana60* · 12-23-2012, 10:34 AM

I need parts for a 72 250.

Air breaher
power steering brackets

Any help would be appreciated. Hope everyone has a merry christmas

**1968C30** · 12-23-2012, 08:56 PM

I have this pump and brackets from a 250 six cyl. This double water pump pulley was also installed but is not the correct number pulley. I think I have the correct pulley but it will be Wed ot Thurs before I can Check. Thanks Daniel

Darren MagooGardner · 12-25-2012, 02:03 AM

my local yard just got in a 72 w a 6 banger in it. I will take pics and post them when I get a chance to go check it out.

**70STOVEBOLT** · 12-26-2012, 05:47 PM

What air cleaner are you looking for? I have a stock non-offset type for manual brakes. If this is what you need let me know.

*mrdana60* · 12-26-2012, 08:00 PM

Thanks guys. But I have decieded to swap to v8 last minute. My dad is getting my 250 and we still need a breather. This 250 will actually go in a 65 c10 with man brakes. What kind of price for it if it will work. Thanks alot and happy holiday.

FTP · 12-27-2012, 03:22 AM

ill pick up on those 6 cyl ps brackets, if you guys still have them. i have a 69 camaro ps setup im looking to install in my truck.

**1968C30** · 12-27-2012, 07:57 AM

Quote:

Originally Posted by FTP

ill pick up on those 6 cyl ps brackets, if you guys still have them. i have a 69 camaro ps setup im looking to install in my truck.

I have the PS brackets The price is $225 Plus shipping if you are wanting the pump. If you only want the brackets and pulleys shipping is included in lower 48

GMC66 · 12-27-2012, 10:18 AM

I have two sets, PM sent.

**70STOVEBOLT** · 12-27-2012, 10:36 AM

Quote:

Originally Posted by mrdana60

Thanks guys. But I have decieded to swap to v8 last minute. My dad is getting my 250 and we still need a breather. This 250 will actually go in a 65 c10 with man brakes. What kind of price for it if it will work. Thanks alot and happy holiday.

$45 shipped. It should work, it does not have the vacuum door on it. I had it on my 70 until I switched to power brakes. Let me know if you need dimensions
on it.

Thanks,
Mark

jervin · 12-27-2012, 05:46 PM

Hello, do you still have the air cleaner?, if its for a one barrel (2 5/8") neck I would be interested. Thanks, John

cubber · 12-29-2012, 07:14 PM

Did you get some brackets? I have some if you still need some.

jervin · 12-29-2012, 10:40 PM

Quote:

Originally Posted by jervin

Hello, do you still have the air cleaner?, if its for a one barrel (2 5/8") neck I would be interested. Thanks, John

Sounds good, if I can get your paypal address I will send out the $45.00 right away. Thanks, John

*mrdana60* · 12-29-2012, 11:01 PM

Glad this has helped some folks find some parts. Going with v8 so ttt for y'all. And happy holidays.

12-23-2012, 10:34 AM	#1
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	wtb 250 inline six parts I need parts for a 72 250. Air breaher power steering brackets Any help would be appreciated. Hope everyone has a merry christmas

12-23-2012, 08:56 PM	#2
1968C30 Senior Member Join Date: Jan 2012 Location: Mt Nebo WV Posts: 1,339	Re: wtb 250 inline six parts I have this pump and brackets from a 250 six cyl. This double water pump pulley was also installed but is not the correct number pulley. I think I have the correct pulley but it will be Wed ot Thurs before I can Check. Thanks Daniel Attached Images

12-25-2012, 02:03 AM	#3
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: wtb 250 inline six parts my local yard just got in a 72 w a 6 banger in it. I will take pics and post them when I get a chance to go check it out.

12-26-2012, 05:47 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: wtb 250 inline six parts What air cleaner are you looking for? I have a stock non-offset type for manual brakes. If this is what you need let me know. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-26-2012, 08:00 PM	#5
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: wtb 250 inline six parts Thanks guys. But I have decieded to swap to v8 last minute. My dad is getting my 250 and we still need a breather. This 250 will actually go in a 65 c10 with man brakes. What kind of price for it if it will work. Thanks alot and happy holiday.

12-27-2012, 03:22 AM	#6
FTP Registered User Join Date: Oct 2012 Location: Chicago, IL Posts: 26	Re: wtb 250 inline six parts ill pick up on those 6 cyl ps brackets, if you guys still have them. i have a 69 camaro ps setup im looking to install in my truck.

12-27-2012, 10:18 AM	#8
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: wtb 250 inline six parts I have two sets, PM sent.

12-27-2012, 05:46 PM	#10
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: wtb 250 inline six parts Hello, do you still have the air cleaner?, if its for a one barrel (2 5/8") neck I would be interested. Thanks, John

12-29-2012, 07:14 PM	#11
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: wtb 250 inline six parts Did you get some brackets? I have some if you still need some. __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

12-29-2012, 11:01 PM	#13
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: wtb 250 inline six parts Glad this has helped some folks find some parts. Going with v8 so ttt for y'all. And happy holidays.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.