OH WTB BBW inner panel

[cortcomp]

Title says it all, looking for the whole panel, have my roof skin off (see link below) and removing the panel would make an easy swap, plus i can dynamat the whole back of the cab before putting the new on.

Understand that these can be rare, looking for one that can be put in place of the stock one, so not cut off inside the cab, but still having the lip that goes around the top and sides. Link to my project here so you can see the lip on the top. Needs shipped to 44410. Understand that these aren't super easy to come by, have cash in hand.

http://67-72chevytrucks.com/vboard/s...=550931&page=2

[McCoyAZ]

Big window cabs are not that hard to find.

Have a weekend off and go looking around salvage yards or spend a few minutes looking here.

I am pretty sure there were several BBW cabs for sale right here.

[cortcomp]

I've been looking through the parts sections, haven't found anything not taken yet. I have this WTB up in case anyone here has one.

Here in NE Ohio, salvage yards are full of stuff to, at the earliest, mid 80s? I know in the southwest and out in the center of the country, there are junkyards with older stuff. here, it's almost always scrapped by the yard owner, or just rotted to death. I've been trolling google and craigslist, hoping one seller gets back to me about a panel he has already out. Found a cab or two within driving distance, but they're nice cabs i hate to cut up, and they want a chunk of change since the cabs have titles. We'll see what happens, have to wait until tomorrow to start calling around local places.

[perro13]

Is this what your lookin for.

[cortcomp]

That's it for sure, what are you asking?

[perro13]

Originally Posted by cortcomp

That's it for sure, what are you asking?

$250 plus shipping

[cortcomp]

I'll take it, you have any idea what shipping is? Commercial address:

201 w main st
Cortland, OH 44410

[cortcomp]

Just to be sure, on that upper right corner of the first pic, none of that is rusted through right? All the rust is surface and not rotted?

[perro13]

Originally Posted by cortcomp

Just to be sure, on that upper right corner of the first pic, none of that is rusted through right? All the rust is surface and not rotted?

Surface

[cortcomp]

Excellent, PM me when you have the total.

[perro13]

Originally Posted by perro13

Surface

Greyhound is the easist to way to ship but i can get a fedex quote

[cortcomp]

Prefer fed ex if you can.

[pimpston65]

Originally Posted by cortcomp

Title says it all, looking for the whole panel, have my roof skin off (see link below) and removing the panel would make an easy swap, plus i can dynamat the whole back of the cab before putting the new on.

Understand that these can be rare, looking for one that can be put in place of the stock one, so not cut off inside the cab, but still having the lip that goes around the top and sides. Link to my project here so you can see the lip on the top. Needs shipped to 44410. Understand that these aren't super easy to come by, have cash in hand.

http://67-72chevytrucks.com/vboard/s...=550931&page=2

how did you restore the inside vents? did you pop the rivets and change the seal also? and how did you get the how thing apart? i could rip my apart and re-weld it or rivet the assembly but since you did it you know best

[LostMy65]

What did shipping end up costing?

[Budman56]

I have two inner panels if that one that perro has doesn't work out. Asking $175 each plus shipping.

[perro13]

Originally Posted by Budman56

I have two inner panels if that one that perro has doesn't work out. Asking $175 each plus shipping.

mine sold

[csa daddy]

Perro13 how much did it end up costing to ship