GA misc parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69CST6.0 · 01-04-2013, 08:52 PM

I have a few parts for sale that I will not be using. parts sold this weekend will be shipped Tuesday
Ventshade brand visors $30 shipped. Has some scratches and over spray from po, over spray can be removed with thinner.

CST/10 emblems has over spray but comes off fairly easy, the chrome is pretty good $25 shipped

8/350 emblems did not check to see how they would clean. $20 shipped.

Black door handles $35 shipped I believe they will clean up nice.

Original windshield and back window trim $45 PLUS shipping each

72 window regulator $20 shipped. rolls up and down smooth.

driver and passenger windows clear $25 each PLUS shipping

TH350 0 miles since rebuild $350 no shipping
Complete single piece drive shaft $60 no shipping will throw in new u joint.
auto transmission cross member $40 no shipping
v8 perches $45 shipped. with 1 free motor mount

HotRod C/10 · 01-04-2013, 09:14 PM

Length on the driveshaft?

69CST6.0 · 01-04-2013, 09:22 PM

I can check tomorrow. It is swb that is all I know.

**CC69Rat** · 01-04-2013, 10:13 PM

In line on the black arm rests pending closer pics (if you have a chance please sir) Thanks.

plumber36757 · 01-04-2013, 11:06 PM

Put me inline on arm rest
Posted via Mobile Device

69CST6.0 · 01-10-2013, 11:49 PM

sorry about the delay here is another picture of the armrests. I would reuse these myself but I am going to the 55-66 style

philB · 01-11-2013, 01:18 AM

if the arm rest are still open, let me know, need some for my '69 c10.

**WIDESIDE72** · 01-11-2013, 03:23 AM

I am interested in the window regulator. It looks like a driver side (?) Are all of the rollers intact?

**WIDESIDE72** · 01-11-2013, 03:25 AM

Also interested in the stainless window trim. Any idea if it is 67-70 or 71/72? Any major dents or damage?

**CC69Rat** · 01-11-2013, 05:42 AM

Passing on the arm rests.. thanks though. Glws.
Posted via Mobile Device

smokinstang70 · 01-11-2013, 07:38 AM

interested in the window trim as well... Depending on answer to previously asked question.

Thanks
Posted via Mobile Device

69CST6.0 · 01-11-2013, 12:21 PM

Quote:

Originally Posted by WIDESIDE72

I am interested in the window regulator. It looks like a driver side (?) Are all of the rollers intact?

It is a driver side I will need to double check the rollers but I am pretty sure they are all there.

Quote:

Originally Posted by WIDESIDE72

Also interested in the stainless window trim. Any idea if it is 67-70 or 71/72? Any major dents or damage?

The trim is the 67-70. I don't think there is a single dent just a few scratches that need to be polished out.

Quote:

Originally Posted by philB

if the arm rest are still open, let me know, need some for my '69 c10.

I will give plumber36757 until this evening.

Johnnyfever · 01-14-2013, 10:13 PM

I am interested in the windshield trim also if everyone in front of me backs out.
Posted via Mobile Device

69CST6.0 · 01-14-2013, 11:24 PM

I still have the trim but I am out of town until Friday, unless one of the previous two people who wanted it speak up its yours and I can get a shipping quote Friday.

philB · 01-14-2013, 11:25 PM

are the arm rest still out there, if so whats the price, only need one but a matched pare hard to pass on.

Johnnyfever · 01-14-2013, 11:28 PM

Thanks. Let me know on Friday.
Posted via Mobile Device

Johnnyfever · 01-14-2013, 11:29 PM

And shipping to 29627
Posted via Mobile Device

69CST6.0 · 01-14-2013, 11:30 PM

Quote:

Originally Posted by philB

are the arm rest still out there, if so whats the price, only need one but a matched pare hard to pass on.

$35 to your door will ship Friday.

philB · 01-15-2013, 12:19 AM

ok, need info to send payment.

smokinstang70 · 01-15-2013, 01:20 AM

Sorry for the late reply.. But the trim will not work for my project.... Thanks
Posted via Mobile Device

philB · 01-15-2013, 01:35 AM

can you send info to email des70003@bellsouth.net with info
i need to send payment.

**WIDESIDE72** · 01-15-2013, 01:47 AM

I will pass on the window trim. I need it for a 72.
Posted via Mobile Device

**WIDESIDE72** · 01-15-2013, 01:49 AM

I am interested in the window regulator, but are you sure it's a driver side? I cant get the pictures up now on my phone, but when I looked before I thought it was a passenger side...
Posted via Mobile Device

brian1971 · 01-15-2013, 06:56 PM

I'll take back window trim if everybody in front of me passed.Thanks Brian
Posted via Mobile Device

69CST6.0 · 01-15-2013, 09:34 PM

Quote:

Originally Posted by WIDESIDE72

I am interested in the window regulator, but are you sure it's a driver side? I cant get the pictures up now on my phone, but when I looked before I thought it was a passenger side...
Posted via Mobile Device

Yes it is a driver side

Quote:

Originally Posted by brian1971

I'll take back window trim if everybody in front of me passed.Thanks Brian
Posted via Mobile Device

The back trim is still available.

Quote:

Originally Posted by philB

can you send info to email des70003@bellsouth.net with info
i need to send payment.

my paypal is marc.bennett@us.army.mil

01-04-2013, 08:52 PM	#1
69CST6.0 Registered User Join Date: May 2012 Location: Ft Stewart, GA Posts: 37	misc parts for sale I have a few parts for sale that I will not be using. parts sold this weekend will be shipped Tuesday Ventshade brand visors $30 shipped. Has some scratches and over spray from po, over spray can be removed with thinner. CST/10 emblems has over spray but comes off fairly easy, the chrome is pretty good $25 shipped 8/350 emblems did not check to see how they would clean. $20 shipped. Black door handles $35 shipped I believe they will clean up nice. Original windshield and back window trim $45 PLUS shipping each 72 window regulator $20 shipped. rolls up and down smooth. driver and passenger windows clear $25 each PLUS shipping TH350 0 miles since rebuild $350 no shipping Complete single piece drive shaft $60 no shipping will throw in new u joint. auto transmission cross member $40 no shipping v8 perches $45 shipped. with 1 free motor mount Last edited by 69CST6.0; 01-10-2013 at 11:55 PM.

01-04-2013, 09:14 PM	#2
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,054	Re: misc parts for sale Length on the driveshaft? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

01-04-2013, 09:22 PM	#3
69CST6.0 Registered User Join Date: May 2012 Location: Ft Stewart, GA Posts: 37	Re: misc parts for sale I can check tomorrow. It is swb that is all I know.

01-04-2013, 10:13 PM	#4
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,224	Re: misc parts for sale In line on the black arm rests pending closer pics (if you have a chance please sir) Thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-04-2013, 11:06 PM	#5
plumber36757 Registered User Join Date: Aug 2012 Location: Saginaw Texas Posts: 290	Re: misc parts for sale Put me inline on arm rest Posted via Mobile Device

01-10-2013, 11:49 PM	#6
69CST6.0 Registered User Join Date: May 2012 Location: Ft Stewart, GA Posts: 37	Re: misc parts for sale sorry about the delay here is another picture of the armrests. I would reuse these myself but I am going to the 55-66 style

01-11-2013, 01:18 AM	#7
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: misc parts for sale if the arm rest are still open, let me know, need some for my '69 c10.

01-11-2013, 03:23 AM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: misc parts for sale I am interested in the window regulator. It looks like a driver side (?) Are all of the rollers intact?

01-11-2013, 03:25 AM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: misc parts for sale Also interested in the stainless window trim. Any idea if it is 67-70 or 71/72? Any major dents or damage?

01-11-2013, 05:42 AM	#10
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,224	Re: misc parts for sale Passing on the arm rests.. thanks though. Glws. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-11-2013, 07:38 AM	#11
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: misc parts for sale interested in the window trim as well... Depending on answer to previously asked question. Thanks Posted via Mobile Device __________________ "Love Affair" Build Thread

01-14-2013, 10:13 PM	#13
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: misc parts for sale I am interested in the windshield trim also if everyone in front of me backs out. Posted via Mobile Device

01-14-2013, 11:24 PM	#14
69CST6.0 Registered User Join Date: May 2012 Location: Ft Stewart, GA Posts: 37	Re: misc parts for sale I still have the trim but I am out of town until Friday, unless one of the previous two people who wanted it speak up its yours and I can get a shipping quote Friday.

01-14-2013, 11:25 PM	#15
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: misc parts for sale are the arm rest still out there, if so whats the price, only need one but a matched pare hard to pass on.

01-14-2013, 11:28 PM	#16
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: misc parts for sale Thanks. Let me know on Friday. Posted via Mobile Device



Register or Log In To remove these advertisements.

01-14-2013, 11:29 PM	#17
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: misc parts for sale And shipping to 29627 Posted via Mobile Device

01-15-2013, 12:19 AM	#19
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: misc parts for sale ok, need info to send payment.

01-15-2013, 01:20 AM	#20
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: misc parts for sale Sorry for the late reply.. But the trim will not work for my project.... Thanks Posted via Mobile Device __________________ "Love Affair" Build Thread

01-15-2013, 01:35 AM	#21
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: misc parts for sale can you send info to email des70003@bellsouth.net with info i need to send payment.

01-15-2013, 01:47 AM	#22
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: misc parts for sale I will pass on the window trim. I need it for a 72. Posted via Mobile Device

01-15-2013, 01:49 AM	#23
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: misc parts for sale I am interested in the window regulator, but are you sure it's a driver side? I cant get the pictures up now on my phone, but when I looked before I thought it was a passenger side... Posted via Mobile Device

01-15-2013, 06:56 PM	#24
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: misc parts for sale I'll take back window trim if everybody in front of me passed.Thanks Brian Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

Register or Log In To remove these advertisements.