1969 C-10 350 3spd-col value with air & bucket seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodzy10ec · 01-07-2013, 11:06 AM

Any idea what might be the restored value of such a truck? This is the way it came from the factory. No tilt, has all the trim. Pretty rough shape but kinda rare I'm thinking, not that that gives it any extra value. Opinions?

ls1nova71 · 01-07-2013, 11:40 AM

Got a pic of the truck?

PanelDeland · 01-07-2013, 11:40 AM

Welcome!!! It's probably not worth any more than any other similar truck,maybe less with the 3 OTT.Mot prefer the work oriented 4 speed or an auto or OD.Still kind of an unusual mix of options.

ls1nova71 · 01-07-2013, 11:42 AM

I just realized it's a shortbed too!

woodzy10ec · 01-07-2013, 12:14 PM

Shortbed, Chrome bumpers front and rear (rear replaced with step). Engine pulled and laying in bed. All aircon brackets present, chrome front bumper present. Now for the bad, bed floor gone, sides ok surpisingly. When the pulled the engine 15+ years ago, left hood slightly open and firewall rotted along the wire shelf, cab otherwise good shape. I estimate it would take $7500-$10,000 to put it back perfect, but not sure it would be worth much more than that. Might be better to part out. Guy argues that seats aren't original because they are drilled, but as I understand that is how it was done at the factory. I'll try to get a pic of the truck, but it's not much, it's just complete.

01-07-2013, 11:06 AM	#1
woodzy10ec Registered User Join Date: Jul 2009 Location: Jamestown, TN Posts: 3	1969 C-10 350 3spd-col value with air & bucket seats Any idea what might be the restored value of such a truck? This is the way it came from the factory. No tilt, has all the trim. Pretty rough shape but kinda rare I'm thinking, not that that gives it any extra value. Opinions? Attached Images Last edited by woodzy10ec; 01-07-2013 at 11:20 AM. Reason: Added photo

01-07-2013, 11:40 AM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: 1969 C-10 350 3spd-col value with air & bucket seats Got a pic of the truck? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-07-2013, 11:40 AM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 1969 C-10 350 3spd-col value with air & bucket seats Welcome!!! It's probably not worth any more than any other similar truck,maybe less with the 3 OTT.Mot prefer the work oriented 4 speed or an auto or OD.Still kind of an unusual mix of options. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-07-2013, 11:42 AM	#4
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: 1969 C-10 350 3spd-col value with air & bucket seats I just realized it's a shortbed too! __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-07-2013, 12:14 PM	#5
woodzy10ec Registered User Join Date: Jul 2009 Location: Jamestown, TN Posts: 3	Re: 1969 C-10 350 3spd-col value with air & bucket seats Shortbed, Chrome bumpers front and rear (rear replaced with step). Engine pulled and laying in bed. All aircon brackets present, chrome front bumper present. Now for the bad, bed floor gone, sides ok surpisingly. When the pulled the engine 15+ years ago, left hood slightly open and firewall rotted along the wire shelf, cab otherwise good shape. I estimate it would take $7500-$10,000 to put it back perfect, but not sure it would be worth much more than that. Might be better to part out. Guy argues that seats aren't original because they are drilled, but as I understand that is how it was done at the factory. I'll try to get a pic of the truck, but it's not much, it's just complete. __________________ woodsignshop@gmail.com -Life gets tedious.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.