LA Free Bench Seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LSUMurse · 01-13-2013, 01:50 PM

I am putting up a free bench seat to whomever wants to come pick it up. It came out of a 1968 C10. It leans forward without issue. The foam really isn't bad at all. The brackets work and the tracks slide. I wasn't looking to replace it any time soon, but I found a near brand new set of seats out of a 2006 Tahoe for real cheap.

I can only leave this offer out there for about a week. The seat is sitting in the dining room because if I put it in the shed, the rats will make sure it doesn't stay in its current condition. My wife is not going to put up with a bench seat in the dining room for long.

If someone wants just the brackets, I'll do $20.00 plus shipping after the week is up. I'd rather give the whole thing away instead of taking it apart. Should you want just the brackets, state it in the thread and I will let you know if nobody bites on the full seat.

dirish · 01-13-2013, 01:53 PM

Can i get the tracks?
Posted via Mobile Device

LSUMurse · 01-13-2013, 02:08 PM

Quote:

Originally Posted by dirish

Can i get the tracks?
Posted via Mobile Device

You are first in line. If nobody wants to come pick up the whole seat (which I doubt, considering I don't see a whole lot of people from around here) by next Sunday, I'll pull everything off the bottom and send it to you. $20 plus shipping.

dirish · 01-13-2013, 02:11 PM

Awesome!
Posted via Mobile Device

LSUMurse · 01-13-2013, 05:19 PM

I notice your signature (or whatever it's called) lists a '69 and '70. Someone can correct me if I'm wrong but I think '67-'68 are different. I don't want you to pay for something and not be able to use it.
Posted via Mobile Device

dirish · 01-13-2013, 05:53 PM

My 16 yr old nephew can use them. Hes on a low budget
Build. A 68 farm truck. I help him when i can, but his truck
Needs LOTS of help. Lol
Posted via Mobile Device

Sammy · 01-13-2013, 06:28 PM

Brackets for the bench should do him fine on a stock seat 67-72.

orngsikL · 01-13-2013, 06:58 PM

I've got a split bench from a 90 in mine. Can you measure from bottom of bracket to to top of the bottom seat cushion. Like where your butt would be. Wondering if it'd give me more or less head room. I'm interstated in the seat.
Posted via Mobile Device

LSUMurse · 01-13-2013, 07:11 PM

Measuring from the kitchen floor up:

Front of seat (where your knee will be) about 11 3/4"
Rear of seat (where the small of your back will be) about 10 3/4"

Those aren't absolutely perfect, but should give you an idea.

**Belairboy55** · 01-13-2013, 10:19 PM

I'll take the seat. I live in Lake Charles LA. PM me with details on pick up. Thanks
Posted via Mobile Device

speedfreak369 · 01-13-2013, 11:10 PM

Put me in line... Pm if it gets to me
Posted via Mobile Device

01-13-2013, 01:50 PM	#1
LSUMurse Registered User Join Date: Mar 2012 Location: New Orleans, La Posts: 406	Free Bench Seat I am putting up a free bench seat to whomever wants to come pick it up. It came out of a 1968 C10. It leans forward without issue. The foam really isn't bad at all. The brackets work and the tracks slide. I wasn't looking to replace it any time soon, but I found a near brand new set of seats out of a 2006 Tahoe for real cheap. I can only leave this offer out there for about a week. The seat is sitting in the dining room because if I put it in the shed, the rats will make sure it doesn't stay in its current condition. My wife is not going to put up with a bench seat in the dining room for long. If someone wants just the brackets, I'll do $20.00 plus shipping after the week is up. I'd rather give the whole thing away instead of taking it apart. Should you want just the brackets, state it in the thread and I will let you know if nobody bites on the full seat. Attached Images __________________ It's not that I am apathetic, I just don't care. If your life is a joke, it appears death will be your punchline.

01-13-2013, 01:53 PM	#2
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Free Bench Seat Can i get the tracks? Posted via Mobile Device

01-13-2013, 02:11 PM	#4
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Free Bench Seat Awesome! Posted via Mobile Device

01-13-2013, 05:19 PM	#5
LSUMurse Registered User Join Date: Mar 2012 Location: New Orleans, La Posts: 406	Re: Free Bench Seat I notice your signature (or whatever it's called) lists a '69 and '70. Someone can correct me if I'm wrong but I think '67-'68 are different. I don't want you to pay for something and not be able to use it. Posted via Mobile Device __________________ It's not that I am apathetic, I just don't care. If your life is a joke, it appears death will be your punchline.

01-13-2013, 05:53 PM	#6
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Free Bench Seat My 16 yr old nephew can use them. Hes on a low budget Build. A 68 farm truck. I help him when i can, but his truck Needs LOTS of help. Lol Posted via Mobile Device

01-13-2013, 06:28 PM	#7
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Free Bench Seat Brackets for the bench should do him fine on a stock seat 67-72. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

01-13-2013, 06:58 PM	#8
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Free Bench Seat I've got a split bench from a 90 in mine. Can you measure from bottom of bracket to to top of the bottom seat cushion. Like where your butt would be. Wondering if it'd give me more or less head room. I'm interstated in the seat. Posted via Mobile Device __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

01-13-2013, 07:11 PM	#9
LSUMurse Registered User Join Date: Mar 2012 Location: New Orleans, La Posts: 406	Re: Free Bench Seat Measuring from the kitchen floor up: Front of seat (where your knee will be) about 11 3/4" Rear of seat (where the small of your back will be) about 10 3/4" Those aren't absolutely perfect, but should give you an idea. __________________ It's not that I am apathetic, I just don't care. If your life is a joke, it appears death will be your punchline.

01-13-2013, 10:19 PM	#10
Belairboy55 Active Member Join Date: Jul 2012 Location: Lake Charles la Posts: 172	Re: Free Bench Seat I'll take the seat. I live in Lake Charles LA. PM me with details on pick up. Thanks Posted via Mobile Device

01-13-2013, 11:10 PM	#11
speedfreak369 Registered User Join Date: Nov 2009 Location: GA/AL Posts: 290	Re: Free Bench Seat Put me in line... Pm if it gets to me Posted via Mobile Device __________________ 1965 c10 short stepside (dad's project) 1967 c10 fleetside 350/350 trans (my baby)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.