|
01-21-2013, 02:44 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: Plano, TX
Posts: 84
|
frame question
So I kniw a lot of people have noticed this and maybe some people wanted to know about it cause I do. So on the right from rail by the engine mounts on my 67 shorty there is a flip on the frame. Now what is it gor and what if it gets straightened out what problems can that cause.can some one help me or is a picture needed to know what I am talking about.
Posted via Mobile Device |
|
|
|
01-21-2013, 03:05 PM
|
#2 |
|
Senior Member
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,843
|
Re: frame question
This turned up section (see pic below)? The only thing it has ever been used for on my 69 CST/20 with 350 and TH400 since new is to mount the guide loop shown for the positive battery cable. My truck has also never had a ground from the frame to inner fender as some say was always present. So, that's also where I'm attaching that ground now that I'm restoring the truck.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
