72 lwb 2wd frame and posi, real good - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 06-12-2003, 07:32 AM

72 2wd lwb chevy frame clean and painted, ps box, redone frontend, 12 bolt posi rearend, 3.07 ratio, no tires or wheels on it. $300 for all. Thanks Randy

Roberty · 06-12-2003, 10:30 AM

Randy - You guys in Kansas are killing me with the good deals. Wish I was closer -

Been looking for a Posi for a long time at a fair price.
Robert

Yellow Cheyenne · 06-12-2003, 12:01 PM

What ratio is the posi and is it coil or leaf rear suspension?

Thanks,

Randy

teeitup · 06-12-2003, 12:44 PM

Randy, I don't know what ratio is in it for sure, its a coil. I don't knwo how to tell ratio. Any help?
Sorry Robert, road trip!!!

Thanks Randy

Roberty · 06-12-2003, 01:02 PM

Quote:

Originally posted by teeitup
Sorry Robert, road trip!!!

Whew!! That trip to KC to Pistons house to get that 383 Stroker 'bout killed me - LOL. Those round trips without a break are rough.

Got a picture of the frame?
Robert

Yellow Cheyenne · 06-12-2003, 03:30 PM

If you feel like removing cover, the teeth can be counted on the ring and pinion gears or look on the ring gear-they usually have the number of ring and pinion teeth stamped into them-just divide the number of ring gear teath by the number of pinion teeth. If you don't want to open the case, just lift both tires off the ground. Put a mark on the rear housing that lines up with a mark on the yoke. Turn one tire exactly one full turn while observing how many turns the pinion turns (with a posi, the opposite tire should turn the same amount and in the same direction). After you have turned the tire one full revolution, note how many times the pinion has turned. If the pinion turned 3 to 3 1/4 turns, it is a 3.07 ratio. If the pinion has turned about 3 3/4 turns, it is a 3.73 ratio. If it turned a little over 4 times, it would be a 4.11 ratio.

Everything is the same for doing a non posi except you leave one tire on the ground so it can't turn. On the tire that you lift off of the ground, turn it TWO full revolutions while noting how many times the pinion has turned. After exactly two full tire revolutions, note how many times the pinion has turned to determine the ratio using the above numbers.

Randy

*Piston* · 06-12-2003, 03:56 PM

Randy, I could come over Sunday afternoon and pick up that handle and show you a quick way of getting the ratio (or very close). Busy?

teeitup · 06-12-2003, 07:31 PM

Well I guess its a 3.07 posi. Here are the # on the inside 381779 14 43 GM 2-71. Thanks Randy

teeitup · 06-12-2003, 07:33 PM

Here is the frame, its dusty. The whole frame has been painted and looks good. It has some chips from hauling, chains scratched it up. Thanks Randy

teeitup · 06-12-2003, 07:34 PM

Garrett, I'll have to check on Sunday. Thanks Randy

ZOOMY · 06-12-2003, 08:34 PM

Is that posi sold yet ?........Zoomy

teeitup · 06-12-2003, 08:40 PM

Not yet Zoomy. $225 for posi or $300 for posi and frame. Its got your bed on it

and maybe your cab

Thanks Randy

Roberty · 06-12-2003, 10:43 PM

Hey Randy - You deliver it to me if I buy all the beer you can drink, put you up for the night, feed you and pay for your gas - LOL?? Somebody is going to get a great deal on this one!!
Robert

teeitup · 06-12-2003, 10:49 PM

Sorry Robert can't make that kind of road trip right now wife is 5 months along and I had to quit drinking with her

or atleast slow down and sneak a few. I think its priced pretty good I just need room to park another truck. Thanks Randy

ZOOMY · 06-12-2003, 11:34 PM

I'm doing so much dealing, I don't know If I'd have room on the trailer for it all. Maybe though. Besides your parts, it's 2 cabs, a stepside box, 2 doors, 2 fenders & maybe a front clip. Anybody between Ks. & Wi. need a frame delivered ???......Zoomy

ZOOMY · 06-12-2003, 11:36 PM

It has my wheels too. Sure would save alot of work.......Zoomy

Solver · 06-13-2003, 01:12 AM

Boy I would be all over that frame if it was in northwest Iowa. But getting it there would be to expensive for me. Don't suppose that is a delivered price?How far are you from Omaha Nebraska?Would it have tires so a person could dolly it?I can't get flat bed but do have access to 2 wheel dolly trailer.If your ever up this way again let me know.

ZOOMY · 06-13-2003, 02:30 AM

I guess it'll all fit if you have a way of putting a cab in the box. The stepside box has the fenders removed, so that will be easier to move around. If I get that front clip, that will temporarily bolt onto the front of the frame. Let's do it.........Zoomy. PM me a list of everything I got so far & I'll send some more $$$$

baggedblaz · 06-13-2003, 04:10 AM

would you be interested in a trade for a 3.73 posi carrier? pm me?
thanks

teeitup · 06-13-2003, 08:24 AM

SOLD to Zoomy!!! You better bring a big trailer,lol. THANKS to all!! Randy

ZOOMY · 06-22-2003, 11:11 PM

.

06-12-2003, 07:32 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	72 lwb 2wd frame and posi, real good 72 2wd lwb chevy frame clean and painted, ps box, redone frontend, 12 bolt posi rearend, 3.07 ratio, no tires or wheels on it. $300 for all. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-12-2003 at 10:54 PM.

06-12-2003, 10:30 AM	#2
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Randy - You guys in Kansas are killing me with the good deals. Wish I was closer - Been looking for a Posi for a long time at a fair price. Robert __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

06-12-2003, 12:01 PM	#3
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	What ratio is the posi and is it coil or leaf rear suspension? Thanks, Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

06-12-2003, 12:44 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Randy, I don't know what ratio is in it for sure, its a coil. I don't knwo how to tell ratio. Any help? Sorry Robert, road trip!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 03:30 PM	#6
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	If you feel like removing cover, the teeth can be counted on the ring and pinion gears or look on the ring gear-they usually have the number of ring and pinion teeth stamped into them-just divide the number of ring gear teath by the number of pinion teeth. If you don't want to open the case, just lift both tires off the ground. Put a mark on the rear housing that lines up with a mark on the yoke. Turn one tire exactly one full turn while observing how many turns the pinion turns (with a posi, the opposite tire should turn the same amount and in the same direction). After you have turned the tire one full revolution, note how many times the pinion has turned. If the pinion turned 3 to 3 1/4 turns, it is a 3.07 ratio. If the pinion has turned about 3 3/4 turns, it is a 3.73 ratio. If it turned a little over 4 times, it would be a 4.11 ratio. Everything is the same for doing a non posi except you leave one tire on the ground so it can't turn. On the tire that you lift off of the ground, turn it TWO full revolutions while noting how many times the pinion has turned. After exactly two full tire revolutions, note how many times the pinion has turned to determine the ratio using the above numbers. Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

06-12-2003, 03:56 PM	#7
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,301	Randy, I could come over Sunday afternoon and pick up that handle and show you a quick way of getting the ratio (or very close). Busy?

06-12-2003, 07:31 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Well I guess its a 3.07 posi. Here are the # on the inside 381779 14 43 GM 2-71. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 07:33 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Here is the frame, its dusty. The whole frame has been painted and looks good. It has some chips from hauling, chains scratched it up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 07:34 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Garrett, I'll have to check on Sunday. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 08:34 PM	#11
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	posi Is that posi sold yet ?........Zoomy

06-12-2003, 08:40 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Not yet Zoomy. $225 for posi or $300 for posi and frame. Its got your bed on it and maybe your cab Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 10:43 PM	#13
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Hey Randy - You deliver it to me if I buy all the beer you can drink, put you up for the night, feed you and pay for your gas - LOL?? Somebody is going to get a great deal on this one!! Robert __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

06-12-2003, 10:49 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry Robert can't make that kind of road trip right now wife is 5 months along and I had to quit drinking with her or atleast slow down and sneak a few. I think its priced pretty good I just need room to park another truck. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-12-2003, 11:34 PM	#15
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	posi I'm doing so much dealing, I don't know If I'd have room on the trailer for it all. Maybe though. Besides your parts, it's 2 cabs, a stepside box, 2 doors, 2 fenders & maybe a front clip. Anybody between Ks. & Wi. need a frame delivered ???......Zoomy

06-12-2003, 11:36 PM	#16
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	I THINK It has my wheels too. Sure would save alot of work.......Zoomy



Register or Log In To remove these advertisements.

06-13-2003, 01:12 AM	#17
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Boy I would be all over that frame if it was in northwest Iowa. But getting it there would be to expensive for me. Don't suppose that is a delivered price?How far are you from Omaha Nebraska?Would it have tires so a person could dolly it?I can't get flat bed but do have access to 2 wheel dolly trailer.If your ever up this way again let me know. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

06-13-2003, 02:30 AM	#18
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	fit I guess it'll all fit if you have a way of putting a cab in the box. The stepside box has the fenders removed, so that will be easier to move around. If I get that front clip, that will temporarily bolt onto the front of the frame. Let's do it.........Zoomy. PM me a list of everything I got so far & I'll send some more $$$$

06-13-2003, 04:10 AM	#19
baggedblaz Registered User Join Date: Jan 2002 Location: Layton,Ut Posts: 196	would you be interested in a trade for a 3.73 posi carrier? pm me? thanks __________________ '82 chev swb 4dr 2wd project '72 2wd blazer LT1/4L60E "SURFSIN" bagged 20's '71 2wd blazer '95 chev 2wd Xcab swb

06-13-2003, 08:24 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	SOLD to Zoomy!!! You better bring a big trailer,lol. THANKS to all!! Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-22-2003, 11:11 PM	#21
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	ttt .

Register or Log In To remove these advertisements.