How to remove engine crossmember 71 K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beanious · 01-31-2013, 12:42 AM

Hello, I'm in the process of replacing the rear main seal in my 71 K10. To get to the RMS I need to pull the oil pan. I have the engine supported by a cherry picker. All of the crossmember bolts and engine mount bolts are removed. I cant seem to get enough room to remove any of the pieces of the crossmember. Please help! Thank youi.

HybridK · 06-29-2013, 12:45 PM

It's been a few months, how'd you end up doing it?

01-31-2013, 12:42 AM	#1
beanious Registered User Join Date: Apr 2008 Location: Sacramento, CA Posts: 195	How to remove engine crossmember 71 K10 Hello, I'm in the process of replacing the rear main seal in my 71 K10. To get to the RMS I need to pull the oil pan. I have the engine supported by a cherry picker. All of the crossmember bolts and engine mount bolts are removed. I cant seem to get enough room to remove any of the pieces of the crossmember. Please help! Thank youi.

06-29-2013, 12:45 PM	#2
HybridK Registered User Join Date: Aug 2010 Location: Evans Mills, NY Posts: 37	Re: How to remove engine crossmember 71 K10 It's been a few months, how'd you end up doing it? __________________ 1972 K10, 1 Ton Suspension, 420hp SBC, SM465, NP205, 10.5" FF Rear, Dana 44 front. Daily Driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.