Engine Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange72350 · 06-13-2003, 12:30 AM

I yanked my stock 350 out of my 72 c10, and i gots a question. The rubber pieces in the engine mounts are worn out. can a guy order new rubber mounts, or does he have 2 order brand new mounts and all? any help is appreciated!!

**Yukon Jack** · 06-13-2003, 11:45 AM

I just got new ones recently, they were pretty cheap to just replace. I seem to recall a place where you could send your existing mounts to have redone, but that sounds like more trouble than just replacing them. I think that was more for the hard to find mounts.

**JIMs70GMC** · 06-13-2003, 11:50 AM

FYI - Prothane poly motor mounts for 67-72 SBC p/n 7-509.

GREEN70-72 · 06-13-2003, 12:42 PM

JIMs, how much did the poly run? There web site does not have a price.

**COBALT** · 06-13-2003, 01:38 PM

I just got stock replacements from NAPA. They worked fine. Getting them in was a different story....

mikej71 · 06-13-2003, 01:47 PM

Autozone had them in stock - I don't remember the brand, but they were made in the USA. I was shocked.

Mike

**JIMs70GMC** · 06-13-2003, 08:04 PM

I emailed their tech dept and got the part number. They did not get a price but one of the board vendors has them for around $70-$80, I think it was GMC Pauls.

06-13-2003, 12:30 AM	#1
orange72350 Registered User Join Date: Jan 2003 Location: Cold, Snowy High Level, Alberta Canada Eh Posts: 394	Engine Mounts I yanked my stock 350 out of my 72 c10, and i gots a question. The rubber pieces in the engine mounts are worn out. can a guy order new rubber mounts, or does he have 2 order brand new mounts and all? any help is appreciated!! __________________ 2003 yamaha raptor. Stock, but it still hauls!!!! 2000 skiddo mxz 700. Camoplast 1.5 inch track, jaws twin pipes, b+b can, custom built and weighted clutch, wiseco piston, high comp heads. its very fast. wow. 72 c-10 longbox. Bright Orange. Brand new 350, rv cam, performer intake, qjet, headers, 2 1/2 inch exhaust into hooker areo chamber mufflers. Body work coming soon. "dont let yer mind wander, its to little to go places by itself." "Forget the herse, cause i'll never die"-ACDC Back In Black "If It's To Loud, Yer Just Too Old" "I Love Anything Fast Enough To Do Something Stupid In" "Instant idiot, just add beer!!""

06-13-2003, 11:45 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	I just got new ones recently, they were pretty cheap to just replace. I seem to recall a place where you could send your existing mounts to have redone, but that sounds like more trouble than just replacing them. I think that was more for the hard to find mounts. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-13-2003, 11:50 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	FYI - Prothane poly motor mounts for 67-72 SBC p/n 7-509. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-13-2003, 12:42 PM	#4
GREEN70-72 Registered User Join Date: Feb 2002 Location: CRESTVIEW,FL,US Posts: 355	JIMs, how much did the poly run? There web site does not have a price. __________________ 70 SWB, 4/6" DROP,20X8 & 20X9.5. BOYD TIMELESS 5,93 BURB POWER SEATS, BILLET SPECIALTIES STEERING WHEELS. SOON TO BE VOTECH AND TBI POWERED. O YEA AND WAL-MART IS THE DEVIL!!!

06-13-2003, 01:38 PM	#5
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I just got stock replacements from NAPA. They worked fine. Getting them in was a different story.... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

06-13-2003, 01:47 PM	#6
mikej71 Unregistered User Join Date: Dec 2001 Location: Houston, TX USA Posts: 538	Autozone had them in stock - I don't remember the brand, but they were made in the USA. I was shocked. Mike __________________ 71 SWB Stepside SB400/TH350

06-13-2003, 08:04 PM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I emailed their tech dept and got the part number. They did not get a price but one of the board vendors has them for around $70-$80, I think it was GMC Pauls. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.