Lets See Those Nitrous/Power Adders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sleeperc10 · 02-24-2013, 11:18 PM

Lets see your NOS/ power adder set-ups in your truck!

bigboybodry · 02-25-2013, 07:04 PM

My 1970 GMC c10 bbc with two foggers

djracer · 02-26-2013, 12:40 AM

Here's Mine. I can't wait to get it out of the paint shop and start putting it back together.

468BIGBLOCK · 02-26-2013, 10:04 AM

my 69 nova standard bore 427 big block with zex system.

flips72 · 02-26-2013, 06:04 PM

Quote:

Originally Posted by 468BIGBLOCK

my 69 nova standard bore 427 big block with zex system.

wow.. thats a very nice nova

i guess mine dont count yet its still sitting in the floor of my shop, nos cheater kit, waiting on the funds to get my fuel system for the juice.

*dohyde34* · 02-26-2013, 10:54 PM

Quote:

Originally Posted by 468BIGBLOCK

my 69 nova standard bore 427 big block with zex system.

so sexy man.

moggey01 · 03-10-2013, 03:44 AM

Here is a EFI single fogger setup that is running in the drag radial stuff. This set up is pretty stout, has been 158 at the 1/8th at over 3100lbs.

vin63 · 03-19-2013, 09:20 PM

These...

...feeding these...

...regulated by these...

djracer · 03-20-2013, 12:11 AM

Sweet!
Posted via Mobile Device

Rollo McFlurry · 03-20-2013, 01:11 AM

Oh my!
Perhaps I should juice the one ton...

ProStreet68SB · 03-20-2013, 01:21 AM

Quote:

Originally Posted by vin63

These...

...feeding these...

...regulated by these...

How much are you spraying? Always loved 2 stages in a plate. Am I guessing correctly that's an Induction Solutions setup?

moggey01 · 03-20-2013, 03:42 AM

Looks like an NX Gemeni Twin

vin63 · 03-20-2013, 04:21 PM

Thanks. It's actually a single stage (up to 250 shot), using NX Lightning Series solenoids that feed a Nitrous ProFlow plate.

djracer · 03-20-2013, 11:23 PM

I bought a plate system to go with my fogger! Couldn't pass on a good deal!
Posted via Mobile Device

bigboybodry · 03-21-2013, 04:39 PM

Quote:

Originally Posted by djracer

I bought a plate system to go with my fogger! Couldn't pass on a good deal!
Posted via Mobile Device

sweet when are you going to bust it off?

RICKSRAT · 03-22-2013, 05:27 AM

Previous Pro Race NOS Fogger. New Wilson Pro flow 2 stage plate.

layinframe · 08-18-2013, 05:23 PM

heres my super power shot with 200hp shot

71Dragtruck · 08-23-2013, 11:53 PM

C20-67_N_MO · 08-28-2013, 11:06 PM

OH MY~!

Love all these NOS setups.

One of these days..... Just you wait. I'll be right there too!

anubisani · 08-29-2013, 01:13 AM

Marv D · 08-29-2013, 09:28 AM

Not mine, but just something for you n2O junkies to drool over LOL
A good friend does the clutches for DbarD racing (Joe Lapone). This is a 904" Mussi nitrous motor with ,, ohhh I don't know about maybe 800-1000+ sprayed with not one, but TWO fogger nozzles per intake runner.

These boys are obviously serious and have a few trophies to show how serious n2O can be

layinframe · 08-29-2013, 08:16 PM

Quote:

Originally Posted by C20-67_N_MO

OH MY~!

Love all these NOS setups.

One of these days..... Just you wait. I'll be right there too!

its very fun

layinframe · 08-29-2013, 08:17 PM

Quote:

Originally Posted by anubisani

whats with the plastic air breather

anubisani · 08-29-2013, 11:31 PM

Plexiglass

layinframe · 08-30-2013, 09:07 AM

Quote:

Originally Posted by anubisani

Plexiglass

sorry plexiglass

02-24-2013, 11:18 PM	#1
Sleeperc10 Registered User Join Date: Feb 2013 Location: Where am I? Posts: 45	Lets See Those Nitrous/Power Adders Lets see your NOS/ power adder set-ups in your truck!

02-25-2013, 07:04 PM	#2
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: Lets See Those Nitrous/Power Adders My 1970 GMC c10 bbc with two foggers Attached Images __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-26-2013, 12:40 AM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Lets See Those Nitrous/Power Adders Here's Mine. I can't wait to get it out of the paint shop and start putting it back together. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-26-2013, 10:04 AM	#4
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: Lets See Those Nitrous/Power Adders my 69 nova standard bore 427 big block with zex system. Attached Images __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

03-10-2013, 03:44 AM	#7
moggey01 Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 315	Re: Lets See Those Nitrous/Power Adders Here is a EFI single fogger setup that is running in the drag radial stuff. This set up is pretty stout, has been 158 at the 1/8th at over 3100lbs. Attached Images

03-19-2013, 09:20 PM	#8
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Lets See Those Nitrous/Power Adders These... ...feeding these... ...regulated by these... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

03-20-2013, 12:11 AM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Lets See Those Nitrous/Power Adders Sweet! Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-20-2013, 01:11 AM	#10
Rollo McFlurry Registered User Join Date: Dec 2012 Location: Hanston, KS Posts: 94	Re: Lets See Those Nitrous/Power Adders Oh my! Perhaps I should juice the one ton... Last edited by Rollo McFlurry; 03-20-2013 at 01:13 AM. Reason: Drinking

03-20-2013, 03:42 AM	#12
moggey01 Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 315	Re: Lets See Those Nitrous/Power Adders Looks like an NX Gemeni Twin

03-20-2013, 04:21 PM	#13
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Lets See Those Nitrous/Power Adders Thanks. It's actually a single stage (up to 250 shot), using NX Lightning Series solenoids that feed a Nitrous ProFlow plate. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

03-20-2013, 11:23 PM	#14
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Lets See Those Nitrous/Power Adders I bought a plate system to go with my fogger! Couldn't pass on a good deal! Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-22-2013, 05:27 AM	#16
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Lets See Those Nitrous/Power Adders Previous Pro Race NOS Fogger. New Wilson Pro flow 2 stage plate. Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

08-18-2013, 05:23 PM	#17
layinframe Registered User Join Date: Jan 2013 Location: north platte ne Posts: 81	Re: Lets See Those Nitrous/Power Adders heres my super power shot with 200hp shot Attached Images __________________ Friends don't let friends drive DONKS lay it out My greatest fear is when I die my wife will sell all my truck parts for what I told her they costs

08-23-2013, 11:53 PM	#18
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Lets See Those Nitrous/Power Adders __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

08-28-2013, 11:06 PM	#19
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Lets See Those Nitrous/Power Adders OH MY~! Love all these NOS setups. One of these days..... Just you wait. I'll be right there too! __________________ Coming Soon: Project 1970 Country Truck



Register or Log In To remove these advertisements.

08-29-2013, 01:13 AM	#20
anubisani Registered User Join Date: Apr 2013 Location: homestead florida Posts: 312	Re: Lets See Those Nitrous/Power Adders

08-29-2013, 09:28 AM	#21
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Lets See Those Nitrous/Power Adders Not mine, but just something for you n2O junkies to drool over LOL A good friend does the clutches for DbarD racing (Joe Lapone). This is a 904" Mussi nitrous motor with ,, ohhh I don't know about maybe 800-1000+ sprayed with not one, but TWO fogger nozzles per intake runner. These boys are obviously serious and have a few trophies to show how serious n2O can be __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

08-29-2013, 11:31 PM	#24
anubisani Registered User Join Date: Apr 2013 Location: homestead florida Posts: 312	Re: Lets See Those Nitrous/Power Adders Plexiglass

Register or Log In To remove these advertisements.