'02 Yukon/Tahoe front CV Shaft bad? Help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURG · 02-26-2013, 07:35 PM

SERIOUS clicking snapping from the left front wheel area when wheel turned all the way to the left and backing up slow or going forward and slowing for a sharp left turn. Thinking CV joint/shaft. Slight play when pulling on it by hand but not a ton of play. Never worked on one of these before. Any special tools or pullers or anything needed and does this sound like a reasonable diagnosis? Any help/input/tips are appreciated. Looks like just pull the rotor and front hub, split the inboard joint, and pull spindle too? Thanks in advance, Durg.

DURG · 03-01-2013, 12:57 PM

Put in the new shaft. Same noise.

**truckdude239** · 03-02-2013, 09:48 AM

Ball joints or wheel hub

DURG · 03-02-2013, 01:01 PM

I have 2 new Timken hubs ordered. I changed out front rotors and pads and rear pads today. The rear emergency brakes backing plate/dust guards were rotted and crumbling and a piece was jammed against rotor making a little grinding noise but I still have the same noises so I will wait and see after I change out the front wheel hubs and bearings. I put the grease right to both upper and lower ball joints also. Thanks.

02-26-2013, 07:35 PM	#1
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	'02 Yukon/Tahoe front CV Shaft bad? Help. SERIOUS clicking snapping from the left front wheel area when wheel turned all the way to the left and backing up slow or going forward and slowing for a sharp left turn. Thinking CV joint/shaft. Slight play when pulling on it by hand but not a ton of play. Never worked on one of these before. Any special tools or pullers or anything needed and does this sound like a reasonable diagnosis? Any help/input/tips are appreciated. Looks like just pull the rotor and front hub, split the inboard joint, and pull spindle too? Thanks in advance, Durg. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

03-01-2013, 12:57 PM	#2
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: '02 Yukon/Tahoe front CV Shaft bad? Help. Put in the new shaft. Same noise. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

03-02-2013, 09:48 AM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: '02 Yukon/Tahoe front CV Shaft bad? Help. Ball joints or wheel hub __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-02-2013, 01:01 PM	#4
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: '02 Yukon/Tahoe front CV Shaft bad? Help. I have 2 new Timken hubs ordered. I changed out front rotors and pads and rear pads today. The rear emergency brakes backing plate/dust guards were rotted and crumbling and a piece was jammed against rotor making a little grinding noise but I still have the same noises so I will wait and see after I change out the front wheel hubs and bearings. I put the grease right to both upper and lower ball joints also. Thanks. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.