|
02-28-2013, 10:00 PM
|
#1 |
|
Registered User
Join Date: Sep 2010
Location: Ajax, Ontario
Posts: 214
|
Box Removal
Can someone tell me how to get the box bolts out with the nuts spinning? This is on my 2001 long box. What a crappy design. I assume GM welded the nuts in and now the welds have let go. I could just cut the bolts but then I couldn't reuse the nuts as they would be filled and still spining
|
|
|
|
03-01-2013, 09:38 AM
|
#2 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: Box Removal
might have to use a hole saw and cut a hole in the floor above the nut and use a socket to hold them
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
03-01-2013, 01:33 PM
|
#3 |
|
Registered User
Join Date: Mar 2008
Location: williamsport,pa
Posts: 329
|
Re: Box Removal
How many are spinning? If its only one or two just cut the heads off and leave those holes empty. There should be like 8 bolts holding it to the frame.
Posted via Mobile Device |
|
|
|
|
03-02-2013, 02:14 AM
|
#4 |
|
Registered User
Join Date: May 2011
Location: StThomas Ont. Canada
Posts: 95
|
Re: Box Removal
;You need to cut a window in the side of the u channel by the bolt to get ahold on the nut,you can install a j clip nut on though the hole to install the box
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
