WTB - '72 Wiring harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camelot · 06-16-2003, 07:25 PM

I have a '72 GMC, 350, TH-350, 4WD and I am looking for the wiring harness(s).

I think there are 3?? one for the front (headlights), one for the middle (engine/guages), and one for the rear (tail lights)??

If anyone has any, let me know. I am tiered of repairing the hack job the guy before me did. I cannot make heads or tails of half the wires.

I don't have factory A/C, but may put it in in the future. Should I just use a factory A/C harness now??

Thanx,

bouncytruck · 06-16-2003, 07:32 PM

LMC has them new but if you do that, you may want to go with a painless setup. You can switch over to the blade style fuses and have extra circuts for things like power windows, keyless entry, fog lights, etc.

There is also a harness that runs along the frame rails back to the tail light harness. I wouldn't think that would be damaged though. I think that the dash harness is around $400

*boytoytrading* · 06-16-2003, 07:45 PM

Hello, I Have 2 more complete harneses left. They are good factory harneses that have not been hacked, I'll sell the whole haness for $150, or just cab, $75. Front clip is $75, or the tail is $35.

bouncytruck · 06-16-2003, 07:57 PM

FYI, I just bought one from boytoytrading late last week (hoefully it will arrive late this week)

**BIG ORANGE** · 06-16-2003, 09:03 PM

I got a 72 cab harness for air with forward light harness and the engine harness for 65.00 plus shipping!

stelth2002 · 06-16-2003, 09:32 PM

I have the taillight setup and would let it go for 30 plus shipping. No splices, or cracks

camelot · 06-17-2003, 02:45 AM

Got a harness from boytoytrading along with some other goodies!!!! Figured I might as well only have one package shipped.

Thanx,

**Tim Christian** · 06-17-2003, 09:50 AM

Hey Camelot, It is good to see you on the board posting. I hope everything on the tilt install went just fine. Hey guys you all be good to Camelot she is a very nice truck owner!

camelot · 06-17-2003, 11:21 AM

Hey Tim,

The install went very smooth. I got the engine installed and the column. Going to try and fire her up this weekend.

Thanx for all your help!!!

06-16-2003, 07:25 PM	#1
camelot Registered User Join Date: Apr 2003 Location: Santa Clara, CA Posts: 39	WTB - '72 Wiring harness I have a '72 GMC, 350, TH-350, 4WD and I am looking for the wiring harness(s). I think there are 3?? one for the front (headlights), one for the middle (engine/guages), and one for the rear (tail lights)?? If anyone has any, let me know. I am tiered of repairing the hack job the guy before me did. I cannot make heads or tails of half the wires. I don't have factory A/C, but may put it in in the future. Should I just use a factory A/C harness now?? Thanx, __________________ Camelot www.toyotagirl.com 1985 Chevy 4Runner 1972 GMC 4WD

06-16-2003, 07:32 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	LMC has them new but if you do that, you may want to go with a painless setup. You can switch over to the blade style fuses and have extra circuts for things like power windows, keyless entry, fog lights, etc. There is also a harness that runs along the frame rails back to the tail light harness. I wouldn't think that would be damaged though. I think that the dash harness is around $400 __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-16-2003, 07:45 PM	#3
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Harness Hello, I Have 2 more complete harneses left. They are good factory harneses that have not been hacked, I'll sell the whole haness for $150, or just cab, $75. Front clip is $75, or the tail is $35.

06-16-2003, 07:57 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	FYI, I just bought one from boytoytrading late last week (hoefully it will arrive late this week) __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-16-2003, 09:03 PM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	I got a 72 cab harness for air with forward light harness and the engine harness for 65.00 plus shipping! __________________ Things happen for a reason!

06-16-2003, 09:32 PM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have the taillight setup and would let it go for 30 plus shipping. No splices, or cracks __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

06-17-2003, 02:45 AM	#7
camelot Registered User Join Date: Apr 2003 Location: Santa Clara, CA Posts: 39	Thanx everyone Got a harness from boytoytrading along with some other goodies!!!! Figured I might as well only have one package shipped. Thanx, __________________ Camelot www.toyotagirl.com 1985 Chevy 4Runner 1972 GMC 4WD

06-17-2003, 09:50 AM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey Camelot, It is good to see you on the board posting. I hope everything on the tilt install went just fine. Hey guys you all be good to Camelot she is a very nice truck owner!

06-17-2003, 11:21 AM	#9
camelot Registered User Join Date: Apr 2003 Location: Santa Clara, CA Posts: 39	tilt column Hey Tim, The install went very smooth. I got the engine installed and the column. Going to try and fire her up this weekend. Thanx for all your help!!! __________________ Camelot www.toyotagirl.com 1985 Chevy 4Runner 1972 GMC 4WD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.