AZ 1967 Speed Warning gauge cluster WITH buzzer and factory harness

[mahanian]

NEW PRICE: $400 shipped!

Cluster is in great shape, there is a piece cracked at the bottom of the bezel so it will need to be replaced. This is the factory cluster out of my truck so I know it works perfect, not "unknown" condition like most I've seen for sale. The dial turns smooth and the buzzer works. It's never been restored so the needles are a little faded. Only change that has been made is I swapped out the nylon screws on the face of the speedo because they commonly get brittle and break off, grounding and damaging the speed warning and I replaced the isolator gaskets that keep the gauge from grounding. I had these nylon screws custom made just for this cluster. I will also include a NOS speed warning knob. $450 shipped

[mahanian]

Pictures...

[sduckworth13]

That's a great price! and shipping is included too makes it a bargain.

[mahanian]

Sunday bump

[67_ShortFleet]

Do you happen to have a 67 gauge bezel?

[mahanian]

Sorry, only the one I'm offering with this cluster

[mahanian]

ttt

[bcnya2]

Hello.....sounds like your willing to separate the bezel and cluster. If so, how much for the S/W, buzzer, and knob?
Thanks, Greg
Posted via Mobile Device

[mahanian]

Thanks but I'm not willing to separate the speed warning out of the cluster. It wouldn't do you much good anyways unless you already have a speed warning cluster because you need the isolated ground built into the rear tin

[bcnya2]

no problem.........I thought your one of your posts suggested you were willing to separate. Im not sure what the isolated ground is? What if you wanted to add a factory tach, how would that effect the tin? Would you have to add it to the tin from your speed warning? What do you get for $325? Thanks, Greg

[mahanian]

Hey Greg,
The speed warning tin would need to be modified for a tach. There is a a boardmember on here that did this for me in the past and did a perfect job. I could have it modified for an extra $60, that's what it would cost me to have him modify it, including shipping to and from him. You would just need to add your tach when you get it from me. For the $325 price you don't get everything you need if you don't already have a speed warning, I could knock $40 off the $450 price if you don't need the 67 bezel so $410 plus $60 to modify it for the tach. Let me know.

[bcnya2]

I appreciate it, and thanks for the quick reply. Thats still more than what I was wanting to go, so I am going to pass. Please pass to the next member. Thanks again, Greg

[mahanian]

No problem, you seem to be pretty interested in a speed warning gauge judging by your inquiries into others I've seen for sale on here. Just to give you an idea of price, I paid $600 plus shipping for my tach/speed warning gauge cluster not restored. That was before I found the board member that can cut the factory tach hole into the speed warning cluster. They go for $700-800 restored. I think you will have a hard time finding a lower price on one that is complete, fully functional and ready for a tach. I haven't seen one on here in awhile that was complete with gauge, tin, buzzer and wiring. I paid $25 just for the NOS knob. Not trying to convince you, just trying to put it in perspective for everyone

[bcnya2]

I appreciate the feedback. I have seen several tach clusters on here, and several speed warning clusters on here........and just trying to gauge what it would cost to piece them together......but still need restored, or whether to just bite the bullet and have one of board members build one.

thanks, Greg

[mahanian]

No worries, if you can't find a speed warning cluster with tach your best bet is to buy a speed warning cluster and have it modified for a tach because the speed warning tin is unique.

The speed warning/tach cluster that jeremiah king sold back in December that you passed on was the only other complete one I've seen in at least 6 months. That one with a tach for $550 was a smoking deal!

[sduckworth13]

I just took my tach, air pressure, 80lb gauge cluster off the parts board no sense in giving it away.

[sduckworth13]

If I had $450.00 I definitely would buy your cluster. You don't find these everyday.

[bcnya2]

Im sure sorry if I offended anyone........was never the intent.

Greg

[mahanian]

Originally Posted by sduckworth13

If I had $450.00 I definitely would buy your cluster. You don't find these everyday.

Thanks Scott

Originally Posted by bcnya2

Im sure sorry if I offended anyone........was never the intent.

Greg

I'm not offended...just offered some advice



bump for my for sale ad

[mahanian]

ttt

[mahanian]

Lower price $400 shipped

[jwalk]

I'll take it all for the $400 shipped! Pm me for payment info. Thanks, Justin
Posted via Mobile Device

[sduckworth13]

Nice deal

[mahanian]

PM sent!

[jwalk]

Payment sent!
Posted via Mobile Device